Why not,
if you don´t bother the power bill you can easily achieve a super clean
legal limit signal which will be much better then any ham linear.
Of course it needs to be be driven by a transmitter with best purity,
perhaps the PT-8000C could be nice or a Racal MA1723 with a 4CX350J or
YL1050 in class A as the driver ;-)
73
Peter, DF3KV
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Jan Erik Holm
Sent: Sonntag, 2. Juli 2006 17:55
Cc: amps@contesting.com
Subject: Re: [Amps] 4CX10 000J
surely no ham would use a thing like that, or?
/ Jim SM2EKM
----------------
Peter Voelpel wrote:
> All the J-types are low distortion, gain of both is about 20db
>
> 73
> Peter, DF3KV
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Joe Subich, W4TV
> What are the differences between the 4CX1000J and 4CX10000D -
> particularly to explain the 10 KW vs. 15 KW output difference
> in the "normal operation" figures on the Eimac short form
> catalog (www.cpii.com/eimac)? Of course, with a listed gain
> of 4.5, it would seem to take 2500 W or so to drive either of
> them to their full capability ...
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|