[Amps] Question on an amp., Will Matney, 2006/07/31

• Re: [Amps] Question on an amp., Bill L. Fuqua, 2006/07/31

Re: [Amps] Plasma Thermo HFS 3000D, Larry Carman, 2006/07/31

• Re: [Amps] Plasma Thermo HFS 3000D, Larry Carman, 2006/07/31

Re: [Amps] Glass melting, f, and D-factor, R L Measures, 2006/07/31

• Re: [Amps] Glass melting, f, and D-factor, Steve Thompson, 2006/07/31

Re: [Amps] MTBF - was Ameritron Amps, Peter Chadwick, 2006/07/31

• Re: [Amps] MTBF - was Ameritron Amps, Bob Maser, 2006/07/31
  • Re: [Amps] MTBF - was Ameritron Amps, mike kendall, 2006/07/31
• Re: [Amps] MTBF - was Ameritron Amps, Peter Chadwick, 2006/07/31
  • Re: [Amps] MTBF - was Ameritron Amps, Tom W8JI, 2006/07/31

[Amps] Tr : Re: Ameritron Amps, DEHAYS Dominique, 2006/07/31

• [Amps] GS35 anode cooler, Steve Thompson, 2006/07/31
  • Re: [Amps] GS35 anode cooler, Will Matney, 2006/07/31

[Amps] Plasma Therm HFS 3000D, Will Matney, 2006/07/30

• Re: [Amps] Plasma Thermo HFS 3000D, Larry Carman, 2006/07/31
  • Re: [Amps] Plasma Thermo HFS 3000D, Phil Clements, 2006/07/31

[Amps] Practical Transformer Design Handbook by Eric Lowdon, Will Matney, 2006/07/30

• Re: [Amps] Practical Transformer Design Handbook by Eric Lowdon, Mike Sawyer, 2006/07/30

[Amps] 160m RTTY, Peter Chadwick, 2006/07/30

• Re: [Amps] 160m RTTY, David G4FTC, 2006/07/30
  • Re: [Amps] 160m RTTY, David G4FTC, 2006/07/30
  • Re: [Amps] 160m RTTY, Tom W8JI, 2006/07/30
  • Re: [Amps] 160m RTTY, Roger D Johnson, 2006/07/30

Re: [Amps] Pre-heating of tubes, Peter Chadwick, 2006/07/30

• Re: [Amps] Pre-heating of tubes, Will Matney, 2006/07/30
• Re: [Amps] Pre-heating of tubes, Tom W8JI, 2006/07/31
• Re: [Amps] Pre-heating of tubes, Peter Chadwick, 2006/07/30
• Re: [Amps] Pre-heating of tubes, Peter Chadwick, 2006/07/31

[Amps] 1.5kw low pass filters, mike kendall, 2006/07/30

• Re: [Amps] 1.5kw low pass filters, Gary Smith, 2006/07/30

Re: [Amps] Vacuum, Will Matney, 2006/07/29

• Re: [Amps] Vacuum, Will Matney, 2006/07/29
• Re: [Amps] Vacuum, Will Matney, 2006/07/29
  • Re: [Amps] Vacuum, Will Matney, 2006/07/29
• Re: [Amps] Vacuum, Will Matney, 2006/07/29
• Re: [Amps] Vacuum, Will Matney, 2006/07/30

[Amps] Fw: Ameritron Amps, ec1cwg, 2006/07/29

• Re: [Amps] Fw: Ameritron Amps, Michael Tope, 2006/07/29

[Amps] conversion scale from dbu to microvolts, Fern Rivard, 2006/07/29

• Re: [Amps] conversion scale from dbu to microvolts, Joe DiPietro, N2UF, 2006/07/29
• Re: [Amps] conversion scale from dbu to microvolts, Karl-Arne Markström, 2006/07/29
  • Re: [Amps] conversion scale from dbu to microvolts, Fern Rivard, 2006/07/29
  • Re: [Amps] conversion scale from dbu to microvolts, Jim Brown, 2006/07/29
    • Re: [Amps] conversion scale from dbu to microvolts, Karl-Arne Markström, 2006/07/29
    • Re: [Amps] conversion scale from dbu to microvolts, Jim Brown, 2006/07/30
• Re: [Amps] conversion scale from dbu to microvolts, Martin Sole, 2006/07/29
• Re: [Amps] conversion scale from dbu to microvolts, Peter Chadwick, 2006/07/31

[Amps] Ameritron Amps, Bob Maser, 2006/07/29

• Re: [Amps] Ameritron Amps, Scott Manthe, 2006/07/29
  • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/29
• Re: [Amps] Ameritron Amps, kenw2dtc, 2006/07/29
  • Message not available
    • Re: [Amps] Ameritron Amps, kenw2dtc, 2006/07/29
• Re: [Amps] Ameritron Amps, Joe Subich, W4TV, 2006/07/29
  • Re: [Amps] Ameritron Amps, Mike Sawyer, 2006/07/29
  • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/29
• Re: [Amps] Ameritron Amps, k7fm, 2006/07/29
  • Re: [Amps] Ameritron Amps, Michael Tope, 2006/07/29
• Re: [Amps] Ameritron Amps, harolddcraft, 2006/07/29
• Re: [Amps] Ameritron Amps, Will Matney, 2006/07/29
• Re: [Amps] Ameritron Amps, W7RY, 2006/07/29
• Re: [Amps] Ameritron Amps, Gudguyham, 2006/07/29
  • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/29
    • Re: [Amps] Ameritron Amps, Tom W8JI, 2006/07/29
    • Re: [Amps] Ameritron Amps, Steve Thompson, 2006/07/29
    • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/29
    • Re: [Amps] Ameritron Amps, John Vickers, 2006/07/29
    • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/29
    • Re: [Amps] Ameritron Amps, John Vickers, 2006/07/29
    • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/29
    • Re: [Amps] Ameritron Amps, John Vickers, 2006/07/29
    • [Amps] RE : Ameritron Amps, hermans, 2006/07/30
    • Re: [Amps] Ameritron Amps, Will Matney, 2006/07/30
    • Re: [Amps] Ameritron Amps, John Vickers, 2006/07/29
    • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/29
    • Re: [Amps] Ameritron Amps, Tom W8JI, 2006/07/29
    • Re: [Amps] Ameritron Amps, Doug Renwick, 2006/07/30
    • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/30
    • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/30
    • Re: [Amps] Ameritron Amps, Phil Clements, 2006/07/31
    • Re: [Amps] Ameritron Amps, pegasus, 2006/07/31
    • Re: [Amps] Ameritron Amps, Tom W8JI, 2006/07/31
    • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/31
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/31
    • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/31
    • Re: [Amps] Ameritron Amps, Tom W8JI, 2006/07/31
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/31
  • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/29
    • Re: [Amps] Ameritron Amps, Bert Almemo, 2006/07/29
    • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/29
    • Re: [Amps] Ameritron Amps, Bert Almemo, 2006/07/29
• Re: [Amps] Ameritron Amps, Gudguyham, 2006/07/29
  • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/29
    • Re: [Amps] Ameritron Amps, k7fm, 2006/07/29
    • Re: [Amps] Ameritron Amps, Michael Tope, 2006/07/29
    • Re: [Amps] Ameritron Amps, Ed Swynar, 2006/07/30
    • Re: [Amps] Ameritron Amps, Will Matney, 2006/07/30
• Re: [Amps] Ameritron Amps, mike kendall, 2006/07/29
• Re: [Amps] Ameritron Amps, Gudguyham, 2006/07/29
• Re: [Amps] Ameritron Amps, Peter Chadwick, 2006/07/30
  • Re: [Amps] Ameritron Amps, Mike Schatzberg, 2006/07/30
    • Re: [Amps] Ameritron Amps, mike kendall, 2006/07/30
    • Re: [Amps] Ameritron Amps, Joe Subich, W4TV, 2006/07/30
  • Re: [Amps] Ameritron Amps, Gary Smith, 2006/07/30
• Re: [Amps] Ameritron Amps, Peter Chadwick, 2006/07/30
• Re: [Amps] Ameritron Amps, Gudguyham, 2006/07/30
  • Re: [Amps] Ameritron Amps, Tom W8JI, 2006/07/30
    • Re: [Amps] Ameritron Amps, Fern Rivard, 2006/07/30
    • Re: [Amps] Ameritron Amps, Ed Swynar, 2006/07/30
    • Re: [Amps] Ameritron Amps, Fern Rivard, 2006/07/30
    • Re: [Amps] Ameritron Amps, Doug Renwick, 2006/07/30
    • [Amps] re Hammond hf amplifiers, Fern Rivard, 2006/07/30
    • [Amps] Tube Prices, Tom W8JI, 2006/07/30
    • Re: [Amps] Tube Prices, Harold Mandel, 2006/07/30
    • Re: [Amps] Tube Prices, Bill Turner, 2006/07/30
    • Re: [Amps] Tube Prices, Will Matney, 2006/07/30
    • Re: [Amps] Tube Prices, R L Measures, 2006/07/30
    • Re: [Amps] Tube Prices, PA3DUV, 2006/07/30
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/30
    • Re: [Amps] Ameritron Amps, Steve Thompson, 2006/07/30
    • Re: [Amps] Ameritron Amps, Tom W8JI, 2006/07/30
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/31
    • Re: [Amps] Ameritron Amps, k7fm, 2006/07/31
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/31
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/31
    • Re: [Amps] Ameritron Amps, Steve Thompson, 2006/07/30
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/31
    • Re: [Amps] Ameritron Amps, Steve Thompson, 2006/07/31
    • Re: [Amps] Ameritron Amps, Steve Thompson, 2006/07/31
    • Message not available
    • Re: [Amps] Ameritron Amps, Steve Thompson, 2006/07/31
    • Re: [Amps] Ameritron Amps, R L Measures, 2006/07/31
    • Re: [Amps] Ameritron Amps, Steve Thompson, 2006/07/31
• Re: [Amps] Ameritron Amps, Peter Chadwick, 2006/07/30
  • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/30
• Re: [Amps] Ameritron Amps, Gudguyham, 2006/07/30
• Re: [Amps] Ameritron Amps, Gudguyham, 2006/07/30
  • Re: [Amps] Ameritron Amps, Bill Turner, 2006/07/30
• Re: [Amps] Ameritron Amps, Mike Schatzberg, 2006/07/30
• Re: [Amps] Ameritron Amps, Peter Chadwick, 2006/07/31
  • [Amps] Glass failures Chinese tubes, Tom W8JI, 2006/07/31
  • Re: [Amps] Ameritron Amps, Will Matney, 2006/07/31

[Amps] Weak Amperex 3-500Z, Keith Dutson, 2006/07/28

• Re: [Amps] Weak Amperex 3-500Z, John Vickers, 2006/07/28
• Re: [Amps] Weak Amperex 3-500Z, R L Measures, 2006/07/28
• Re: [Amps] Weak Amperex 3-500Z, Peter Chadwick, 2006/07/28
• Re: [Amps] Weak Amperex 3-500Z, R L Measures, 2006/07/30

[Amps] Arc distance, Tom W8JI, 2006/07/28

• Re: [Amps] Arc distance - see for youself!, Dr. David Kirkby, 2006/07/29
  • Re: [Amps] Arc distance - see for youself!, Dr. David Kirkby, 2006/07/29
• Re: [Amps] Arc distance, Larry Carman, 2006/07/28
  • [Amps] Arc distance and plasma, Tom W8JI, 2006/07/28
    • Re: [Amps] Arc distance and plasma, Bill Fuqua, 2006/07/28
    • Re: [Amps] Arc distance and plasma, Will Matney, 2006/07/28
    • [Amps] Good Source for Sweep tubes, Dave Meitzen, 2006/07/28
    • Re: [Amps] Arc distance and plasma, Steven Cook, 2006/07/28
    • Re: [Amps] Arc distance and plasma, Tom W8JI, 2006/07/28
    • Re: [Amps] Arc distance and plasma, Will Matney, 2006/07/28
    • Re: [Amps] Arc distance and plasma, Tom W8JI, 2006/07/28
    • Re: [Amps] Arc distance and plasma, PA3DUV, 2006/07/29
  • Re: [Amps] Arc distance, Tom W8JI, 2006/07/28
    • Re: [Amps] Arc distance, Ian White GM3SEK, 2006/07/28
    • Re: [Amps] Arc distance, Will Matney, 2006/07/28
    • Re: [Amps] Arc distance, Ian White GM3SEK, 2006/07/29
    • Re: [Amps] Arc distance, Will Matney, 2006/07/29
    • Re: [Amps] Arc distance, Ian White GM3SEK, 2006/07/29
    • Re: [Amps] Arc distance, Will Matney, 2006/07/29
    • Re: [Amps] Arc distance, Ian White GM3SEK, 2006/07/29
    • Re: [Amps] Arc distance, Tom W8JI, 2006/07/29
    • Re: [Amps] Pre-heating of tubes, GGLL, 2006/07/28
    • Re: [Amps] Pre-heating of tubes, Will Matney, 2006/07/29
    • Re: [Amps] Pre-heating of tubes, R L Measures, 2006/07/29
    • Re: [Amps] Pre-heating of tubes, Ian White GM3SEK, 2006/07/29
  • Re: [Amps] Arc distance, Will Matney, 2006/07/28
  • Re: [Amps] Arc distance, R L Measures, 2006/07/28
• Re: [Amps] Arc distance, Dave Haupt, 2006/07/28
  • Re: [Amps] Arc distance, Tom W8JI, 2006/07/28
  • Re: [Amps] Arc distance, Will Matney, 2006/07/28

[Amps] arc to grid basket TSPA, John T. M. Lyles, 2006/07/27

• Re: [Amps] arc to grid basket TSPA, Tom W8JI, 2006/07/27
• Re: [Amps] arc to grid basket TSPA, R L Measures, 2006/07/27
• Re: [Amps] arc to grid basket TSPA, Will Matney, 2006/07/27

[Amps] W3NQN High power RF Harmonic filters, Dick, 2006/07/27

• Re: [Amps] W3NQN High power RF Harmonic filters, Jim Tonne, 2006/07/27
• [Amps] W3NQN High power RF Harmonic filters, Craig, 2006/07/27

[Amps] 3-500Z to 3CX1200D7, PlanerGuy, 2006/07/26

• Re: [Amps] 3-500Z to 3CX1200D7, Bob Maser, 2006/07/26

[Amps] TL-922 question, Vic K2VCO, 2006/07/26

• Re: [Amps] TL-922 question, Peter Voelpel, 2006/07/26
• Re: [Amps] TL-922 question, W2RU - Bud Hippisley, 2006/07/26

[Amps] plexiglas isolation in coils, Dick, 2006/07/26

• Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 2006/07/26
  • Re: [Amps] plexiglas isolation in coils, Dick, 2006/07/27
    • Re: [Amps] plexiglas isolation in coils, R L Measures, 2006/07/27
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Tom W8JI, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Bob Maser, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Keith Dutson, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, R L Measures, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, RICHARD GEORGE, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, kenw2dtc, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, Vic K2VCO, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, John Vickers, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, John Vickers, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 2006/07/28
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, W7RY, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, Tom W8JI, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, R L Measures, 2006/07/30
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/29
    • Message not available
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, Tom W8JI, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, Tom W8JI, 2006/07/29
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/30
    • Re: [Amps] plexiglas isolation in coils, Tom W8JI, 2006/07/30
    • Re: [Amps] plexiglas isolation in coils, Bill Turner, 2006/07/30
• Re: [Amps] plexiglas isolation in coils, Tom W8JI, 2006/07/26
  • Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 2006/07/26
    • Re: [Amps] plexiglas isolation in coils, Tom W8JI, 2006/07/26
    • Re: [Amps] plexiglas isolation in coils, R L Measures, 2006/07/27
    • Re: [Amps] plexiglas isolation in coils, Ian White GM3SEK, 2006/07/27
• Re: [Amps] plexiglas isolation in coils, PA3DUV, 2006/07/26
• Re: [Amps] plexiglas isolation in coils, Colin Lamb, 2006/07/28

[Amps] Russian microwave cermic-metal tube needed, Hsu, 2006/07/26

• Re: [Amps] Russian microwave cermic-metal tube needed, mike kendall, 2006/07/26
  • Re: [Amps] Russian microwave cermic-metal tube needed, Paul Whatton, 2006/07/26
    • Re: [Amps] Russian microwave cermic-metal tube needed, Hsu, 2006/07/26
    • Re: [Amps] Russian microwave cermic-metal tube needed, mike kendall, 2006/07/26
  • Re: [Amps] Russian microwave cermic-metal tube needed, Hsu, 2006/07/26
• Re: [Amps] Russian microwave cermic-metal tube needed, Hsu, 2006/07/27

[Amps] flash arcs, Peter Chadwick, 2006/07/26

• Re: [Amps] flash arcs, Tom W8JI, 2006/07/26
  • Re: [Amps] flash arcs, R L Measures, 2006/07/26
  • Re: [Amps] flash arcs, Jim Brown, 2006/07/26
    • Re: [Amps] flash arcs, Tom W8JI, 2006/07/26
    • Re: [Amps] flash arcs, Michael Tope, 2006/07/27
• [Amps] Flash arcs, Peter Chadwick, 2006/07/27
  • Re: [Amps] Flash arcs, Jim Brown, 2006/07/27
  • Re: [Amps] Flash arcs, Will Matney, 2006/07/27
    • Re: [Amps] Flash arcs, Mike K6BR, 2006/07/27
    • Re: [Amps] Flash arcs, Martin Sole, 2006/07/27
    • Re: [Amps] Flash arcs, Steve Thompson, 2006/07/28
    • Re: [Amps] Flash arcs, Jim Tonne, 2006/07/28
• Re: [Amps] Flash arcs, Peter Chadwick, 2006/07/27

Re: [Amps] PIN diode mods, Peter Chadwick, 2006/07/26

• [Amps] PIN diode mods, Craig, 2006/07/26
  • Re: [Amps] PIN diode mods, Jan Erik Holm, 2006/07/26
    • Re: [Amps] PIN diode mods, Peter Voelpel, 2006/07/26
    • Re: [Amps] PIN diode mods, Jan Erik Holm, 2006/07/26
  • Re: [Amps] PIN diode mods, Tom W8JI, 2006/07/26
    • Re: [Amps] PIN diode mods, Jan Erik Holm, 2006/07/26
    • Re: [Amps] PIN diode mods, Paul Christensen, 2006/07/26
    • Re: [Amps] PIN diode mods, Jan Erik Holm, 2006/07/26
    • Re: [Amps] PIN diode mods, Paul Christensen, 2006/07/26
    • Re: [Amps] PIN diode mods, Jan Erik Holm, 2006/07/26

Re: [Amps] setting the grid adrift, Peter Chadwick, 2006/07/26

• Re: [Amps] setting the grid adrift, Peter Chadwick, 2006/07/26
  • Re: [Amps] setting the grid adrift, Mike Schatzberg, 2006/07/26
    • Re: [Amps] setting the grid adrift, Osten B Magnusson, 2006/07/26
  • Re: [Amps] setting the grid adrift, Mike Schatzberg, 2006/07/26
• Re: [Amps] setting the grid adrift, Peter Chadwick, 2006/07/26
  • Re: [Amps] setting the grid adrift, Theo Bellamy, 2006/07/26
  • Re: [Amps] setting the grid adrift, David C. Hallam, 2006/07/26
• Re: [Amps] setting the grid adrift, Will Matney, 2006/07/26

[Amps] MOSFET biasing, Danny Pease, 2006/07/25

• Re: [Amps] MOSFET biasing, Tom W8JI, 2006/07/25
• Re: [Amps] MOSFET biasing, Steve Thompson, 2006/07/26
• Re: [Amps] MOSFET biasing, Peter Chadwick, 2006/07/26

Re: [Amps] AMPs without HV transformer(make correct and other), Hsu, 2006/07/25

• Re: [Amps] AMPs without HV transformer(make correct and other), carl s., 2006/07/25

Re: [Amps] Amps Digest, Vol 43, Issue 138, Borislav Trifonov, 2006/07/25

• Re: [Amps] Amps Digest, Vol 43, Issue 138, Will Matney, 2006/07/25
• Re: [Amps] Amps Digest, Vol 43, Issue 138, Bill Turner, 2006/07/26

Re: [Amps] Amps Digest, Vol 43, Issue 134, Borislav Trifonov, 2006/07/25

• Re: [Amps] Amps Digest, Vol 43, Issue 134, Bill Turner, 2006/07/25
  • Re: [Amps] Amps Digest, Vol 43, Issue 134, Will Matney, 2006/07/25
    • Re: [Amps] Amps Digest, Vol 43, Issue 134, Bill Turner, 2006/07/25
    • Re: [Amps] Amps Digest, Vol 43, Issue 134, Will Matney, 2006/07/25
    • Re: [Amps] Amps Digest, Vol 43, Issue 134, Bill Turner, 2006/07/25
    • Re: [Amps] Amps Digest, Vol 43, Issue 134, Will Matney, 2006/07/25
    • Re: [Amps] Amps Digest, Vol 43, Issue 134, S. J. Blackwell, 2006/07/25
  • Re: [Amps] Amps Digest, Vol 43, Issue 134, Steve Thompson, 2006/07/25
  • Re: [Amps] Amps Digest, Vol 43, Issue 134, Frank Goenninger, 2006/07/25

[Amps] RS1002A and 7527, Hsu, 2006/07/24

• [Amps] RS1002A and 7527, Hsu, 2006/07/24

[Amps] Tube 201, Will Matney, 2006/07/24

• Re: [Amps] Tube 201, John Vickers, 2006/07/24
  • Re: [Amps] Tube 201, Will Matney, 2006/07/25

[Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, John Vickers, 2006/07/24

• Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, GGLL, 2006/07/25
  • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, John Vickers, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Dick Hanson, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Phil Clements, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Karl-Arne Markström, 2006/07/26
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 2006/07/26
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Joe Subich, W4TV, 2006/07/26
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, PA3DUV, 2006/07/25
    • Message not available
    • Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • [Amps] setting the grid adrift, Chris Howard, 2006/07/25
    • Re: [Amps] setting the grid adrift, Tom W8JI, 2006/07/25
    • Re: [Amps] setting the grid adrift, Chris Howard, 2006/07/25
    • Re: [Amps] setting the grid adrift, Peter Voelpel, 2006/07/25
    • Re: [Amps] setting the grid adrift, Tom W8JI, 2006/07/25
    • Re: [Amps] setting the grid adrift, Will Matney, 2006/07/25
    • Re: [Amps] setting the grid adrift, Tom W8JI, 2006/07/25
    • Re: [Amps] setting the grid adrift, Will Matney, 2006/07/25
    • Re: [Amps] setting the grid adrift, Will Matney, 2006/07/25
    • Re: [Amps] setting the grid adrift, Peter Voelpel, 2006/07/25
    • Re: [Amps] setting the grid adrift, Will Matney, 2006/07/25
    • Re: [Amps] setting the grid adrift, Tom W8JI, 2006/07/26
    • Re: [Amps] setting the grid adrift, Will Matney, 2006/07/26
    • Re: [Amps] setting the grid adrift, RICHARD GEORGE, 2006/07/26
    • Re: [Amps] setting the grid adrift, Jim Tonne, 2006/07/26
    • Re: [Amps] setting the grid adrift, Will Matney, 2006/07/26
    • Re: [Amps] setting the grid adrift, Mike Sawyer, 2006/07/26
    • Re: [Amps] setting the grid adrift, Chris Howard, 2006/07/25
    • Re: [Amps] setting the grid adrift, Peter Voelpel, 2006/07/25
    • [Amps] PIN diode mods, Tom W8JI, 2006/07/25
    • Re: [Amps] PIN diode mods, Rob & Terri Sherwood, 2006/07/25
    • Re: [Amps] PIN diode mods, Paul Christensen, 2006/07/26
    • Re: [Amps] PIN diode mods, Jan Erik Holm, 2006/07/26
    • Re: [Amps] setting the grid adrift, Tom W8JI, 2006/07/25
    • Re: [Amps] setting the grid adrift, Chris Howard, 2006/07/25
    • Re: [Amps] setting the grid adrift, Chris Howard, 2006/07/25
    • Re: [Amps] setting the grid adrift, Tom W8JI, 2006/07/26
    • Re: [Amps] setting the grid adrift -- ok done here, Chris Howard, 2006/07/26
    • Re: [Amps] setting the grid adrift, R L Measures, 2006/07/26
    • Re: [Amps] setting the grid adrift, m.ford, 2006/07/26
    • Re: [Amps] setting the grid adrift, R L Measures, 2006/07/26
    • Re: [Amps] setting the grid adrift, Will Matney, 2006/07/25

[Amps] Looking for info: SRF7053 device, John D'Ausilio, 2006/07/24

• Re: [Amps] Looking for info: SRF7053 device, Will Matney, 2006/07/24
  • Message not available
    • Re: [Amps] Looking for info: SRF7053 device, Will Matney, 2006/07/24
    • Re: [Amps] Looking for info: SRF7053 device, Steve Thompson, 2006/07/24
• Re: [Amps] Looking for info: SRF7053 device, Steve Thompson, 2006/07/24
• Re: [Amps] Looking for info: SRF7053 device, Peter Chadwick, 2006/07/25

[Amps] the radio handbook by mr orr w6sai and amps, robert briggs, 2006/07/24

• Re: [Amps] the radio handbook by mr orr w6sai and amps, R L Measures, 2006/07/24

Re: [Amps]The maximum amount Âof 811As and 572Bs in parallel, Peter Chadwick, 2006/07/24

• Re: [Amps]The maximum amount Âof 811As and 572Bs in parallel, Peter Chadwick, 2006/07/24
  • Re: [Amps]The maximum amount ?of 811As and 572Bs in parallel, R L Measures, 2006/07/24
• Re: [Amps]The maximum amount Âof 811As and 572Bs in parallel, Peter Chadwick, 2006/07/25

[Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 2006/07/23

• Re: [Amps] Pi network tuning, Tom W8JI, 2006/07/23
  • Re: [Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 2006/07/23
    • [Amps] the radio handbook by mr orr w6sai and amps, Ian swain, 2006/07/23
    • [Amps] the radio handbook by mr orr w6sai and amps, Hsu, 2006/07/23
    • Re: [Amps] the radio handbook by mr orr w6sai and amps, Tom W8JI, 2006/07/24
    • Re: [Amps] Pi network tuning, Tom W8JI, 2006/07/24
    • Re: [Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 2006/07/24
    • Re: [Amps] Pi network tuning, Tom W8JI, 2006/07/24
    • Re: [Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 2006/07/24
  • Re: [Amps] Pi network tuning, R L Measures, 2006/07/24

[Amps] re; The maximum amount of 811As and 572Bs in parallel, Hsu, 2006/07/23

• Re: [Amps] re; The maximum amount of 811As and 572Bs in parallel, R L Measures, 2006/07/24
  • Re: [Amps] re; The maximum amount of 811As and 572Bs in parallel, Hsu, 2006/07/24

[Amps] Caustic soda, Barrie Smith, 2006/07/23

• Re: [Amps] Caustic soda, William Stehl, 2006/07/23

[Amps] The maximum amount of 811As and 572Bs in parallel, Hsu, 2006/07/23

• Re: [Amps] The maximum amount of 811As and 572Bs in parallel, crawfish, 2006/07/23
  • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Will Matney, 2006/07/23
  • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Tom W8JI, 2006/07/23
    • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 2006/07/24
    • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Will Matney, 2006/07/24
    • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Peter Voelpel, 2006/07/24
    • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Will Matney, 2006/07/24
    • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Steve Thompson, 2006/07/24
    • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 2006/07/24
  • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 2006/07/24
• Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 2006/07/24
  • Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Hsu, 2006/07/23

[Amps] 3-500Z convertion, Hsu, 2006/07/23

• Re: [Amps] 3-500Z convertion, R L Measures, 2006/07/24
• Re: [Amps] 3-500Z convertion, Peter Chadwick, 2006/07/23
  • Re: [Amps] 3-500Z convertion, Hsu, 2006/07/23
    • Re: [Amps] 3-500Z convertion, Jan Erik Holm, 2006/07/23
    • Re: [Amps] [??????????????]Re: 3-500Z convertion, Hsu, 2006/07/23
    • Re: [Amps] [??????????????]Re: 3-500Z convertion, Jan Erik Holm, 2006/07/23
    • Message not available
    • Re: [Amps] [??????????????]Re: [??????????????]Re: 3-500Z convertion, Jan Erik Holm, 2006/07/24
    • Re: [Amps] 3-500Z convertion, R L Measures, 2006/07/24
    • Re: [Amps] 3-500Z convertion, Mike Schatzberg, 2006/07/24
    • Re: [Amps] 3-500Z convertion, Bob Nielsen, 2006/07/24
    • Re: [Amps] 3-500Z convertion, Mike Schatzberg, 2006/07/24
• Re: [Amps] 3-500Z convertion, Mike Schatzberg, 2006/07/23
• Re: [Amps] 3-500Z convertion, Peter Chadwick, 2006/07/23
  • Re: [Amps] 3-500Z convertion, Hsu, 2006/07/23
• Re: [Amps] 3-500Z convertion, Hsu, 2006/07/23
• Re: [Amps] 3-500Z convertion, Peter Chadwick, 2006/07/24
  • Re: [Amps] 3-500Z convertion, R L Measures, 2006/07/24
• Re: [Amps] 3-500Z convertion, Peter Chadwick, 2006/07/25
  • Re: [Amps] 3-500Z convertion, Karl-Arne Markström, 2006/07/25
  • Re: [Amps] 3-500Z convertion, Steve Thompson, 2006/07/25

[Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/23

• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/23
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/23
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/23
  • Message not available
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/23
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 2006/07/23
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/23
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/23
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Chris Howard, 2006/07/23
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Chris Howard, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Chris Howard, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 2006/07/25
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, R L Measures, 2006/07/24
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 2006/07/23
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, wc6w@juno.com, 2006/07/23
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/23
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 2006/07/24
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Bill Fuqua, 2006/07/24
  • Message not available
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Gary Smith, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Bill Fuqua, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Keith Dutson, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Keith Dutson, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, R L Measures, 2006/07/25
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Phil Clements, 2006/07/25
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/25
    • Message not available
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/25
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/25
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 2006/07/25
    • [Amps] Zirconium, Tom W8JI, 2006/07/24
    • Re: [Amps] Zirconium, Will Matney, 2006/07/24
    • Message not available
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
    • Message not available
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 2006/07/24
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 2006/07/24
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Michael Tope, 2006/07/24
    • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 2006/07/24
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 2006/07/25
  • Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Karl-Arne Markström, 2006/07/25
• Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 2006/07/25

[Amps] Recommended 3-500's, Martin Sole, 2006/07/23

• Re: [Amps] Recommended 3-500's, Joe Isabella, 2006/07/23
• Re: [Amps] Recommended 3-500's, R L Measures, 2006/07/24

Re: [Amps] Amps Digest, Vol 43, Issue 95, TroySledhead, 2006/07/22

• Re: [Amps] Amps Digest, Vol 43, Issue 95, Administrator, 2006/07/22

[Amps] Clipperton L Parts For Sale, Jeff Weinberg W8CQ, 2006/07/22

• [Amps] Clipperton L Parts For Sale, Jeff Weinberg W8CQ, 2006/07/22

[Amps] Radio Pricing the Third Millenium, wc6w@juno.com, 2006/07/22

• Re: [Amps] Radio Pricing the Third Millenium, Bill Turner, 2006/07/22
• Re: [Amps] Radio Pricing the Third Millenium, Bob Nielsen, 2006/07/22
• Re: [Amps] Radio Pricing the Third Millenium, Keith Dutson, 2006/07/22

Re: [Amps] making sinks black, Roy Koeppe, 2006/07/22

• Re: [Amps] making sinks black, Jim Tonne, 2006/07/22
  • Re: [Amps] making sinks black, Steve Thompson, 2006/07/22
  • Re: [Amps] making sinks black, slifamily, 2006/07/22
    • Re: [Amps] making sinks black, Tom W8JI, 2006/07/22
    • Re: [Amps] making sinks black, S. J. Blackwell, 2006/07/22
    • Re: [Amps] making sinks black, Tom W8JI, 2006/07/22
    • Re: [Amps] making sinks black, Steve Thompson, 2006/07/23
    • Re: [Amps] making sinks black, Dr. David Kirkby, 2006/07/22
• Re: [Amps] making sinks black, , 2006/07/22
• Re: [Amps] making sinks black, Peter Chadwick, 2006/07/23

Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, mike kendall, 2006/07/22

• Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, Will Matney, 2006/07/22
• Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, Will Matney, 2006/07/22
• Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, Will Matney, 2006/07/22

[Amps] making aluminum heat sinks black, mike kendall, 2006/07/22

• Re: [Amps] making aluminum heat sinks black, mike kendall, 2006/07/22
  • Re: [Amps] making aluminum heat sinks black, Steve Thompson, 2006/07/22
• Re: [Amps] making aluminum heat sinks black, Kenneth D. Grimm, K4XL, 2006/07/22
  • Re: [Amps] making aluminum heat sinks black, , 2006/07/22
• Re: [Amps] making aluminum heat sinks black, slifamily, 2006/07/22
  • Re: [Amps] making aluminum heat sinks black, pegasus, 2006/07/22
    • Re: [Amps] making aluminum heat sinks black, Will Matney, 2006/07/22
    • Re: [Amps] making aluminum heat sinks black, Paul Christensen, 2006/07/22
    • Re: [Amps] making aluminum heat sinks black, Will Matney, 2006/07/22
    • Re: [Amps] making aluminum heat sinks black, Paul Christensen, 2006/07/22
    • Re: [Amps] making aluminum heat sinks black, Will Matney, 2006/07/22
• Re: [Amps] making aluminum heat sinks black, Tim O'Rourke, 2006/07/22
• Re: [Amps] making aluminum heat sinks black, Peter Chadwick, 2006/07/23

[Amps] Before I turn on my amplifier . . . . . ., n3nd, 2006/07/22

• Re: [Amps] Before I turn on my amplifier . . . . . ., Harold Mandel, 2006/07/22

Re: [Amps] salvaging shorted tubes, Will Matney, 2006/07/21

• Re: [Amps] salvaging shorted tubes, Lon W. Cottingham, 2006/07/21
• Re: [Amps] salvaging shorted tubes, Tony King - W4ZT, 2006/07/21
• Re: [Amps] salvaging shorted tubes, Roy Koeppe, 2006/07/22

[Amps] 3cx3000A7 driver, R L Measures, 2006/07/21

• Re: [Amps] 3cx3000A7 driver, Bill Turner, 2006/07/21
  • Re: [Amps] 3cx3000A7 driver, John D'Ausilio, 2006/07/21
    • Re: [Amps] 3cx3000A7 driver, Will Matney, 2006/07/21
    • Re: [Amps] 3cx3000A7 driver, Will Matney, 2006/07/22
    • Re: [Amps] 3cx3000A7 driver, Michael Tope, 2006/07/22
    • Re: [Amps] 3cx3000A7 driver, Joe Subich, W4TV, 2006/07/22
    • Re: [Amps] 3cx3000A7 driver, Bert Almemo, 2006/07/22
    • Re: [Amps] 3cx3000A7 driver, Pete Smith, 2006/07/22
    • [Amps] German HF/VHF rig, Harold Mandel, 2006/07/22
    • Re: [Amps] (Off Topic) German HF/VHF rig, Frank Goenninger, 2006/07/23
  • Re: [Amps] 3cx3000A7 driver, Frank Goenninger, 2006/07/22
• Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 2006/07/22
  • Re: [Amps] 3cx3000A7 driver, Steve Thompson, 2006/07/22
  • Re: [Amps] 3cx3000A7 driver, Harold Mandel, 2006/07/22
    • Re: [Amps] 3cx3000A7 driver, Joe Isabella, 2006/07/22
  • Re: [Amps] 3cx3000A7 driver, Frank Goenninger, 2006/07/23
• Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 2006/07/23
  • Re: [Amps] 3cx3000A7 driver, Karl-Arne Markström, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, crawfish, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, Jan Erik Holm, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, k7fm, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, Barrie Smith, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, k7fm, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, Mark Beckwith, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, Chris Pedder, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, Mark Beckwith, 2006/07/23
    • Re: [Amps] 3cx3000A7 driver, crawfish, 2006/07/23
• Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 2006/07/23
• Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 2006/07/24

[Amps] SB-220 rebuild advice, Christopher J Galbraith, 2006/07/21

• Re: [Amps] SB-220 rebuild advice, R L Measures, 2006/07/21
• Re: [Amps] SB-220 rebuild advice, Tom W8JI, 2006/07/22
  • Re: [Amps] SB-220 rebuild advice, Paul Christensen, 2006/07/22
  • Re: [Amps] SB-220 rebuild advice, Christopher J Galbraith, 2006/07/22

[Amps] font sizes, bob finger, 2006/07/21

• Re: [Amps] font sizes, Pete Smith, 2006/07/21
  • Re: [Amps] font sizes, bob finger, 2006/07/21
    • Re: [Amps] font sizes, Phil Clements, 2006/07/21
    • [Amps] RE : font sizes, hermans, 2006/07/21
• Re: [Amps] font sizes, Tony King - W4ZT, 2006/07/21

[Amps] Posting in cute font sizes., R L Measures, 2006/07/21

• Re: [Amps] Posting in cute font sizes., Administrator, 2006/07/21
• Re: [Amps] Posting in cute font sizes., Bill Turner, 2006/07/21
  • Re: [Amps] Posting in cute font sizes., Will Matney, 2006/07/21
    • Re: [Amps] Posting in cute font sizes., Bill Turner, 2006/07/21

Re: [Amps]Grid fuses (was: ÂLife and gain of 3-500Z), Peter Chadwick, 2006/07/21

• Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), R L Measures, 2006/07/21
• Re: [Amps]Grid fuses (was: ÂLife and gain of 3-500Z), Peter Chadwick, 2006/07/21
  • [Amps] Runaway grid, Tom W8JI, 2006/07/21
    • Re: [Amps] Runaway grid, R L Measures, 2006/07/21
  • Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), Bill Turner, 2006/07/21
  • Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), Bill Turner, 2006/07/21
• Re: [Amps]Grid fuses (was: ÂLife and gain of 3-500Z), Peter Chadwick, 2006/07/21
  • Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), R L Measures, 2006/07/21

[Amps] crowbar TSPA, John T. M. Lyles, 2006/07/20

• Re: [Amps] crowbar TSPA, Ian White GM3SEK, 2006/07/20

[Amps] Why mu TSPA, John T. M. Lyles, 2006/07/20

• Re: [Amps] Why mu TSPA, Jim Tonne, 2006/07/20

[Amps] Crowbar that HV!, Mark Hill, 2006/07/20

• Re: [Amps] Crowbar that HV!, kenw2dtc, 2006/07/20
• Re: [Amps] Crowbar that HV!, Mark Hill, 2006/07/21

[Amps] Henry 2K, Martin Sole, 2006/07/20

• Re: [Amps] Henry 2K, Will Matney, 2006/07/20
  • Message not available
    • Re: [Amps] Henry 2K, Will Matney, 2006/07/20
• Re: [Amps] Henry 2K, Martin Sole, 2006/07/22
• Re: [Amps] Henry 2K, PlanerGuy, 2006/07/21

[Amps] grid fuses, Lon W. Cottingham, 2006/07/19

• Re: [Amps] grid fuses, Joe Subich, W4TV, 2006/07/19
  • Re: [Amps] grid fuses, Tom W8JI, 2006/07/20
  • Re: [Amps] grid fuses, GGLL, 2006/07/20
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/20
    • Re: [Amps] grid fuses, Will Matney, 2006/07/20
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/20
    • Re: [Amps] grid fuses, Will Matney, 2006/07/20
    • Re: [Amps] grid fuses, Joe Subich, W4TV, 2006/07/20
    • Re: [Amps] grid fuses, Will Matney, 2006/07/20
    • Re: [Amps] grid fuses, R L Measures, 2006/07/21
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/20
    • Re: [Amps] grid fuses, Will Matney, 2006/07/20
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/21
    • Re: [Amps] grid fuses, R L Measures, 2006/07/21
    • Re: [Amps] grid fuses, R L Measures, 2006/07/21
    • Re: [Amps] grid fuses, Will Matney, 2006/07/21
    • Re: [Amps] grid fuses, Joe Subich, W4TV, 2006/07/21
    • Re: [Amps] grid fuses, Will Matney, 2006/07/21
    • Re: [Amps] grid fuses, Joe Subich, W4TV, 2006/07/21
    • Re: [Amps] grid fuses, Chris Howard, 2006/07/21
    • Re: [Amps] grid fuses, Chris Howard, 2006/07/21
    • Re: [Amps] grid fuses, Chris Howard, 2006/07/21
    • Re: [Amps] grid fuses, Bill Turner, 2006/07/21
    • Re: [Amps] grid fuses, Will Matney, 2006/07/21
    • Message not available
    • Re: [Amps] grid fuses, Chris Howard, 2006/07/20
    • Re: [Amps] grid fuses, Michael Tope, 2006/07/20
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/20
    • Re: [Amps] grid fuses, Chris Howard, 2006/07/20
    • Re: [Amps] grid fuses, GGLL, 2006/07/20
    • Re: [Amps] grid fuses, R L Measures, 2006/07/21
  • Re: [Amps] grid fuses, R L Measures, 2006/07/20
    • Re: [Amps] grid fuses, Joe Subich, W4TV, 2006/07/20
    • Re: [Amps] grid fuses, R L Measures, 2006/07/21
• Re: [Amps] grid fuses, Keith Dutson, 2006/07/19
  • Re: [Amps] grid fuses, Paul Christensen, 2006/07/19
    • Re: [Amps] grid fuses, R L Measures, 2006/07/20
  • Re: [Amps] grid fuses, Mike K6BR, 2006/07/19
  • Re: [Amps] AMPS, W7RY, 2006/07/19
    • Re: [Amps] AMPS, Harold Mandel, 2006/07/20
    • Re: [Amps] AMPS, R L Measures, 2006/07/20
    • Re: [Amps] AMPS, Ian White GM3SEK, 2006/07/20
    • Re: [Amps] AMPS, R L Measures, 2006/07/21
    • Re: [Amps] AMPS, Ian White GM3SEK, 2006/07/21
    • Re: [Amps] AMPS, R L Measures, 2006/07/21
    • Re: [Amps] AMPS, Joe Subich, W4TV, 2006/07/21
    • Re: [Amps] AMPS, R L Measures, 2006/07/21
    • Re: [Amps] AMPS, Joe Subich, W4TV, 2006/07/21
    • Re: [Amps] AMPS, John Vickers, 2006/07/21
    • Re: [Amps] AMPS, R L Measures, 2006/07/22
    • Re: [Amps] AMPS, Joe Subich, W4TV, 2006/07/21
    • Re: [Amps] AMPS, R L Measures, 2006/07/22
    • Re: [Amps] AMPS, Joe Subich, W4TV, 2006/07/22
    • Re: [Amps] AMPS, R L Measures, 2006/07/22
    • Re: [Amps] AMPS, Ian White GM3SEK, 2006/07/22
    • Re: [Amps] AMPS, R L Measures, 2006/07/22
    • Re: [Amps] AMPS, Joe Subich, W4TV, 2006/07/22
    • Re: [Amps] AMPS, R L Measures, 2006/07/23
    • Re: [Amps] AMPS, Ian White GM3SEK, 2006/07/22
  • Re: [Amps] grid fuses, R L Measures, 2006/07/20
• Re: [Amps] grid fuses, Gudguyham, 2006/07/19
• Re: [Amps] grid fuses, Peter Chadwick, 2006/07/21
  • Re: [Amps] grid fuses, R L Measures, 2006/07/21
  • Re: [Amps] grid fuses, GGLL, 2006/07/21
• Re: [Amps] grid fuses, Roy Koeppe, 2006/07/21
  • Re: [Amps] grid fuses, Tom W8JI, 2006/07/21
  • Re: [Amps] grid fuses, Peter Voelpel, 2006/07/21
• [Amps] grid fuses, Lon W. Cottingham, 2006/07/21
  • Re: [Amps] grid fuses, Will Matney, 2006/07/21
    • Re: [Amps] grid fuses, Peter Voelpel, 2006/07/21
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/21
    • Re: [Amps] grid fuses, Will Matney, 2006/07/21
    • Re: [Amps] grid fuses, R L Measures, 2006/07/22
    • Re: [Amps] grid fuses, Will Matney, 2006/07/21
  • Re: [Amps] grid fuses, Bill Turner, 2006/07/21
  • [Amps] Why Heathkit and others floated the grids, Tom W8JI, 2006/07/21
    • Re: [Amps] Why Heathkit and others floated the grids, R L Measures, 2006/07/22
• Re: [Amps] grid fuses, Roy Koeppe, 2006/07/22
  • Re: [Amps] grid fuses, Tom W8JI, 2006/07/22
    • Re: [Amps] grid fuses, R L Measures, 2006/07/23
  • Re: [Amps] grid fuses, Will Matney, 2006/07/22
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/22
    • Re: [Amps] grid fuses, Will Matney, 2006/07/22
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/22
    • Re: [Amps] grid fuses, Will Matney, 2006/07/23
    • Re: [Amps] grid fuses, Chris Howard, 2006/07/24
    • Re: [Amps] grid fuses, Tom W8JI, 2006/07/24
    • Re: [Amps] grid fuses, Chris Howard, 2006/07/24
    • Re: [Amps] grid fuses, Will Matney, 2006/07/24
    • [Amps] grid fuse and contact potential bias link, Tom W8JI, 2006/07/23
• Re: [Amps] grid fuses, carl s., 2006/07/23
  • Re: [Amps] grid fuses, Tom W8JI, 2006/07/23
  • Re: [Amps] grid fuses, R L Measures, 2006/07/24
• Re: [Amps] grid fuses, Peter Chadwick, 2006/07/23
  • [Amps] 572B grid, Tom W8JI, 2006/07/23
    • [Amps] cheap glass vacuum tube, Hsu, 2006/07/23
    • Re: [Amps] 572B grid, kenw2dtc, 2006/07/23
    • Re: [Amps] 572B grid, Vic K2VCO, 2006/07/23
    • Re: [Amps] 572B grid, Vic K2VCO, 2006/07/23
    • Re: [Amps] 572B grid, John Vickers, 2006/07/23
    • Re: [Amps] 572B grid, Jan Erik Holm, 2006/07/23
    • Re: [Amps] 572B grid, Jan Erik Holm, 2006/07/23
    • Re: [Amps] 572B grid, crawfish, 2006/07/23
    • Re: [Amps] 572B grid, kenw2dtc, 2006/07/23
    • Re: [Amps] 572B grid, Vic K2VCO, 2006/07/23

[Amps] Hi Mu, Low Mu, Barrie Smith, 2006/07/19

• Re: [Amps] Hi Mu, Low Mu, Tom W8JI, 2006/07/20

Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Gudguyham, 2006/07/19

• Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/20
  • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 2006/07/21
  • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/20

[Amps] 6m AMP Santa Monica, Thorsten DL7PP, 2006/07/19

• Re: [Amps] 6m AMP Santa Monica, Tom W8JI, 2006/07/19
• Re: [Amps] 6m AMP Santa Monica, Steve Katz, 2006/07/19

[Amps] Hi Mu correction, Tom W8JI, 2006/07/18

• Re: [Amps] Hi Mu correction, Tony King - W4ZT, 2006/07/19
  • Re: [Amps] Hi Mu correction, Tom W8JI, 2006/07/19
    • Re: [Amps] Hi Mu correction, Phil Clements, 2006/07/19
    • Re: [Amps] Hi Mu correction, crawfish, 2006/07/19
  • Re: [Amps] Hi Mu correction, Bill Fuqua, 2006/07/19
    • Re: [Amps] Hi Mu correction, Mark Hill, 2006/07/19
    • Re: [Amps] Hi Mu correction, Tony King - W4ZT, 2006/07/19
• Re: [Amps] Hi Mu correction, R L Measures, 2006/07/19

[Amps] FW: RF Chokes, Phil Clements, 2006/07/18

• [Amps] FW: RF Chokes, Phil Clements, 2006/07/18
  • Re: [Amps] FW: RF Chokes, R L Measures, 2006/07/19
• Re: [Amps] FW: RF Chokes, R L Measures, 2006/07/20

Re: [Amps] Amps Digest, Vol 43, Issue 70, Edwin Karl, 2006/07/18

• Re: [Amps] Amps Digest, Vol 43, Issue 70, Tom W8JI, 2006/07/18
  • Re: [Amps] Amps Digest, Vol 43, Issue 70, m.ford, 2006/07/18
    • Re: [Amps] Amps Digest, Vol 43, Issue 70, Keith Dutson, 2006/07/18
    • [Amps] RE : Amps Digest, Vol 43, Issue 70, hermans, 2006/07/19
  • Re: [Amps] Amps Digest, Vol 43, Issue 70, R L Measures, 2006/07/18
• Re: [Amps] Amps Digest, Vol 43, Issue 70, Gary Schafer, 2006/07/18
  • Re: [Amps] Amps Digest, Vol 43, Issue 70, W7RY, 2006/07/18
• Re: [Amps] Amps Digest, Vol 43, Issue 70, Gudguyham, 2006/07/18
• Re: [Amps] Amps Digest, Vol 43, Issue 70, Gudguyham, 2006/07/19
  • Re: [Amps] Amps Digest, Vol 43, Issue 70, R L Measures, 2006/07/19

[Amps] output of SB220 typical TSPA, John T. M. Lyles, 2006/07/17

• Re: [Amps] output of SB220 typical TSPA, Will Matney, 2006/07/17
  • Re: [Amps] output of SB220 typical TSPA, Joe Isabella, 2006/07/17
    • Re: [Amps] output of SB220 typical TSPA, k7rdx, 2006/07/17
    • Re: [Amps] output of SB220 typical TSPA, Tom W8JI, 2006/07/17
    • Re: [Amps] output of SB220 typical TSPA, k7rdx, 2006/07/17
    • [Amps] Life and gain of 3-500Z, Tom W8JI, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, R L Measures, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, k7rdx, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, Joe Isabella, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, Tom W8JI, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, R L Measures, 2006/07/19
    • [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 2006/07/19
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/19
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Paul Christensen, 2006/07/19
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Gary Schafer, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Mike Schatzberg, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Message not available
    • Message not available
    • Message not available
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Joe Subich, W4TV, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Ian White GM3SEK, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Ian White GM3SEK, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Ian White GM3SEK, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Joe Subich, W4TV, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 2006/07/19
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), S. J. Blackwell, 2006/07/20
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Will Matney, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Will Matney, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Chris Howard, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Will Matney, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 2006/07/21
    • [Amps] Gassy tubes, Tom W8JI, 2006/07/21
    • Re: [Amps] Gassy tubes, R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Chris Howard, 2006/07/21
    • Re: [Amps] Grid fuses, Tony King - W4ZT, 2006/07/21
    • Re: [Amps] Grid fuses, Chris Howard, 2006/07/21
    • Re: [Amps] Grid fuses, Tony King - W4ZT, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), David C. Hallam, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Roger Glover, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Roger Glover, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/21
    • Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 2006/07/19
    • Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, R L Measures, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, Tom W8JI, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, k7rdx, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, Phil Clements, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, Peter Voelpel, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, R L Measures, 2006/07/19
    • Re: [Amps] Life and gain of 3-500Z, Peter Voelpel, 2006/07/21
    • Re: [Amps] Life and gain of 3-500Z, R L Measures, 2006/07/21
    • Re: [Amps] Life and gain of 3-500Z, Tom W8JI, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, R L Measures, 2006/07/19
    • Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 2006/07/19
    • Re: [Amps] Life and gain of 3-500Z, R L Measures, 2006/07/18
    • Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 2006/07/18
    • Re: [Amps] output of SB220 typical TSPA, Joe Isabella, 2006/07/18
    • Re: [Amps] output of SB220 typical TSPA, R L Measures, 2006/07/18
• Re: [Amps] output of SB220 typical TSPA, Joe Isabella, 2006/07/17

[Amps] QRO membership revoked, Tom W8JI, 2006/07/17

• Re: [Amps] QRO membership revoked, Joe Isabella, 2006/07/17
• Re: [Amps] QRO membership revoked, kenw2dtc, 2006/07/17
• Re: [Amps] QRO membership revoked, Tony King - W4ZT, 2006/07/17
  • Re: [Amps] QRO membership revoked, Will Matney, 2006/07/17
    • Re: [Amps] QRO membership revoked, Will Matney, 2006/07/17
    • Re: [Amps] QRO membership revoked, Steve Thompson, 2006/07/17
    • Re: [Amps] QRO membership revoked, Joe Isabella, 2006/07/17
  • [Amps] RE : QRO membership revoked, hermans, 2006/07/17
• Re: [Amps] QRO membership revoked, m.ford, 2006/07/17
• Re: [Amps] QRO membership revoked, Ian White GM3SEK, 2006/07/17
• Re: [Amps] QRO membership revoked, Bill Coleman, 2006/07/18
• Re: [Amps] QRO membership revoked, k7fm, 2006/07/22
  • Re: [Amps] QRO membership revoked, kenw2dtc, 2006/07/22
  • Re: [Amps] QRO membership revoked, Tom W8JI, 2006/07/22
• Re: [Amps] QRO membership revoked, Roy Koeppe, 2006/07/17
• Re: [Amps] QRO membership revoked, Peter Chadwick, 2006/07/17
• Re: [Amps] QRO membership revoked, Gudguyham, 2006/07/17
• Re: [Amps] QRO membership revoked, Peter Chadwick, 2006/07/21
  • Re: [Amps] QRO membership revoked, kenw2dtc, 2006/07/21
    • [Amps] RE : QRO membership revoked, hermans, 2006/07/21

[Amps] RF Chokes, Peter Chadwick, 2006/07/17

• Re: [Amps] RF Chokes, Mark Hill, 2006/07/17
• Re: [Amps] RF Chokes, Peter Chadwick, 2006/07/17
  • Re: [Amps] RF Chokes, Dan Hearn, 2006/07/17
    • Re: [Amps] RF Chokes, Tom W8JI, 2006/07/17
    • Re: [Amps] RF Chokes, Harold Mandel, 2006/07/17
    • Re: [Amps] RF Chokes, Bill Turner, 2006/07/17
    • Re: [Amps] RF Chokes, Phil Clements, 2006/07/17
    • Re: [Amps] RF Chokes, GGLL, 2006/07/17
    • Re: [Amps] RF Chokes, Tom W8JI, 2006/07/18
    • Re: [Amps] RF Chokes, R L Measures, 2006/07/18
    • Re: [Amps] RF Chokes, Phil Clements, 2006/07/18
    • Re: [Amps] RF Chokes, Tom W8JI, 2006/07/18
    • Re: [Amps] RF Chokes, Harold Mandel, 2006/07/18
    • Re: [Amps] RF Chokes, Will Matney, 2006/07/18
    • Re: [Amps] RF Chokes, Phil Clements, 2006/07/18
    • Re: [Amps] RF Chokes, Tom W8JI, 2006/07/18
    • Re: [Amps] RF Chokes, R L Measures, 2006/07/19
    • Re: [Amps] RF Chokes, R L Measures, 2006/07/19
    • Re: [Amps] RF Chokes, R L Measures, 2006/07/19
• Re: [Amps] RF Chokes, Roy Koeppe, 2006/07/17
• Re: [Amps] RF Chokes, Peter Chadwick, 2006/07/17
• Re: [Amps] RF Chokes, wc6w@juno.com, 2006/07/18
• [Amps] RF Chokes, w1itt, 2006/07/18
  • Re: [Amps] RF Chokes, Phil Clements, 2006/07/18
    • Re: [Amps] RF Chokes, Tom W8JI, 2006/07/18
• Re: [Amps] RF Chokes, w1itt, 2006/07/18
• Re: [Amps] RF Chokes, wc6w@juno.com, 2006/07/18
  • Re: [Amps] RF Chokes, Kenneth D. Grimm, K4XL, 2006/07/19
    • Re: [Amps] RF Chokes, GGLL, 2006/07/19
    • Re: [Amps] RF Chokes, Peter Voelpel, 2006/07/19
    • Re: [Amps] RF Chokes, Harold Mandel, 2006/07/19
    • Re: [Amps] RF Chokes, Will Matney, 2006/07/19

[Amps] Peak power ratings, Gudguyham, 2006/07/16

• Re: [Amps] Peak power ratings, R L Measures, 2006/07/17
• Re: [Amps] Peak power ratings, Gudguyham, 2006/07/17
  • Re: [Amps] Peak power ratings, R L Measures, 2006/07/17
• Re: [Amps] Peak power ratings, Gudguyham, 2006/07/17

[Amps] FW: Transformers, Peter Voelpel, 2006/07/16

• Re: [Amps] FW: Transformers, Steve Thompson, 2006/07/17
• Re: [Amps] FW: Transformers, R L Measures, 2006/07/17
• Re: [Amps] FW: Transformers, Gudguyham, 2006/07/16
  • Re: [Amps] FW: Transformers, Gary Schafer, 2006/07/16
  • Re: [Amps] FW: Transformers, Peter Voelpel, 2006/07/16
    • Re: [Amps] FW: Transformers, Gary Schafer, 2006/07/16
    • Re: [Amps] FW: Transformers, Peter Voelpel, 2006/07/16
    • Re: [Amps] FW: Transformers, Gary Schafer, 2006/07/16
  • Re: [Amps] FW: Transformers, R L Measures, 2006/07/17
• Re: [Amps] FW: Transformers, Gudguyham, 2006/07/17
• [Amps] Fw: transformers, m.ford, 2006/07/18
• [Amps] Fw: transformers, m.ford, 2006/07/18
  • Re: [Amps] Fw: transformers, Gary Schafer, 2006/07/18

[Amps] Tetrode Amplifier, Bob Maser, 2006/07/15

• Re: [Amps] Tetrode Amplifier, m.ford, 2006/07/18
• Re: [Amps] Tetrode Amplifier, Bob Maser, 2006/07/15

Re: [Amps] Transformers, Gudguyham, 2006/07/15

• Re: [Amps] Transformers, Will Matney, 2006/07/15
• Re: [Amps] Transformers, R L Measures, 2006/07/16
• Re: [Amps] Transformers, Peter Chadwick, 2006/07/16
  • Message not available
    • Re: [Amps] Transformers, Will Matney, 2006/07/16
    • Re: [Amps] Transformers, Steve Thompson, 2006/07/16
    • Message not available
    • Re: [Amps] Transformers, Steve Thompson, 2006/07/16
    • Re: [Amps] Transformers, Will Matney, 2006/07/16
    • Re: [Amps] Transformers, Tom W8JI, 2006/07/16
    • Re: [Amps] Transformers, Will Matney, 2006/07/16
• Re: [Amps] Transformers, Gudguyham, 2006/07/16
  • Re: [Amps] Transformers, R L Measures, 2006/07/16
• Re: [Amps] transformers, Roy Koeppe, 2006/07/16
  • Re: [Amps] transformers, Tom W8JI, 2006/07/16
  • Re: [Amps] transformers, R L Measures, 2006/07/16
• Re: [Amps] Transformers, Gudguyham, 2006/07/16
  • Re: [Amps] Transformers, R L Measures, 2006/07/16
• Re: [Amps] transformers, Roy Koeppe, 2006/07/16
  • Re: [Amps] transformers, John Vickers, 2006/07/16
    • Re: [Amps] transformers, John Vickers, 2006/07/16
    • Re: [Amps] transformers, R L Measures, 2006/07/16
  • [Amps] SB220, Tom W8JI, 2006/07/16
  • Re: [Amps] transformers, Mike Schatzberg, 2006/07/16
    • Re: [Amps] transformers, Mike K6BR, 2006/07/16
    • Re: [Amps] transformers, Mike Schatzberg, 2006/07/16
    • Re: [Amps] transformers, John Vickers, 2006/07/16
    • Re: [Amps] transformers, Bob Nielsen, 2006/07/16
    • Re: [Amps] transformers, Tom W8JI, 2006/07/16
    • Re: [Amps] transformers, Mike Schatzberg, 2006/07/16
    • Re: [Amps] transformers, Gary Schafer, 2006/07/16
    • Re: [Amps] transformers, Mike Schatzberg, 2006/07/16
    • Re: [Amps] transformers, Tom W8JI, 2006/07/17
    • Re: [Amps] transformers, Tom W8JI, 2006/07/17
    • Re: [Amps] transformers, m.ford, 2006/07/17
    • Re: [Amps] transformers, Gary Schafer, 2006/07/17
    • Re: [Amps] transformers, m.ford, 2006/07/17
    • Re: [Amps] transformers, Gary Schafer, 2006/07/17
    • Re: [Amps] transformers, m.ford, 2006/07/17
    • Re: [Amps] transformers, Gary Schafer, 2006/07/18
    • Re: [Amps] transformers, R L Measures, 2006/07/17
    • Re: [Amps] transformers, John Vickers, 2006/07/17
    • Re: [Amps] transformers, Peter Voelpel, 2006/07/17
    • Re: [Amps] transformers, John Vickers, 2006/07/17
    • [Amps] Power PEP vs drive power, Tom W8JI, 2006/07/17
    • Re: [Amps] transformers, R L Measures, 2006/07/17
    • Re: [Amps] transformers, John Vickers, 2006/07/17
    • Re: [Amps] transformers, Will Matney, 2006/07/17
    • Re: [Amps] transformers, Mike Schatzberg, 2006/07/17
    • Re: [Amps] transformers, Will Matney, 2006/07/16
    • Re: [Amps] transformers, Tom W8JI, 2006/07/17
    • Re: [Amps] transformers, Paul Christensen, 2006/07/17
• Re: [Amps] Transformers, Gudguyham, 2006/07/16
  • Re: [Amps] Transformers, R L Measures, 2006/07/16
• Re: [Amps] Transformers, Gudguyham, 2006/07/16
  • Re: [Amps] Transformers, R L Measures, 2006/07/17
• Re: [Amps] transformers, Peter Chadwick, 2006/07/17
• Re: [Amps] Transformers, Gudguyham, 2006/07/17
• Re: [Amps] transformers, Gudguyham, 2006/07/17
• Re: [Amps] transformers, Peter Chadwick, 2006/07/17
• Re: [Amps] transformers, Gudguyham, 2006/07/17
• Re: [Amps] transformers, Gudguyham, 2006/07/17
• Re: [Amps] transformers, Gudguyham, 2006/07/17
  • Re: [Amps] transformers, Joe Isabella, 2006/07/17
    • Re: [Amps] transformers, Keith Dutson, 2006/07/17
    • Re: [Amps] transformers, Peter Voelpel, 2006/07/17
    • Re: [Amps] transformers, Keith Dutson, 2006/07/18
  • Re: [Amps] transformers, R L Measures, 2006/07/18
• Re: [Amps] transformers, Gudguyham, 2006/07/17
  • Re: [Amps] transformers, Joe Isabella, 2006/07/17
• Re: [Amps] transformers, Gary Schafer, 2006/07/18

[Amps] Filament life, Rob & Terri Sherwood, 2006/07/15

• Re: [Amps] Filament life, R L Measures, 2006/07/16
• Re: [Amps] Filament life, Gudguyham, 2006/07/15
  • Re: [Amps] Filament life, R L Measures, 2006/07/16
• Re: [Amps] Filament life, Peter Chadwick, 2006/07/15
• Re: [Amps] Filament life, Gudguyham, 2006/07/15
  • Re: [Amps] Filament life, R L Measures, 2006/07/16
• Re: [Amps] Filament life, S. J. Blackwell, 2006/07/16
  • Re: [Amps] Filament life, R L Measures, 2006/07/16
• Re: [Amps] Filament life, S. J. Blackwell, 2006/07/16

Re: [Amps] Switching Power Supplies, Colin Lamb, 2006/07/14

• Re: [Amps] Switching Power Supplies, Steve Thompson, 2006/07/14
  • Re: [Amps] Switching Power Supplies, Joe Isabella, 2006/07/14
• Re: [Amps] Switching Power Supplies, Vic K2VCO, 2006/07/14
• Re: [Amps] Switching Power Supplies, David Lisney, 2006/07/14
• Re: [Amps] Switching Power Supplies, wc6w@juno.com, 2006/07/14
  • Re: [Amps] Switching Power Supplies, Steve Thompson, 2006/07/15
• Re: [Amps] Switching Power Supplies, David Smith, 2006/07/14

[Amps] high frequency filament excitation TSPA, John T. M. Lyles, 2006/07/13

• Re: [Amps] high frequency filament excitation TSPA, Tom W8JI, 2006/07/13
  • Re: [Amps] high frequency filament excitation TSPA, k7rdx, 2006/07/13
  • Re: [Amps] high frequency filament excitation TSPA, R L Measures, 2006/07/15
    • Re: [Amps] high frequency filament excitation TSPA, Larry Carman, 2006/07/15
• Re: [Amps] high frequency filament excitation TSPA, Larry Carman, 2006/07/17

[Amps] High frequency heater supplies, Steve Thompson, 2006/07/13

• Re: [Amps] High frequency heater supplies, Jim Tonne, 2006/07/13
  • Re: [Amps] High frequency heater supplies, Steve Thompson, 2006/07/13
    • Re: [Amps] High frequency heater supplies, Tony King - W4ZT, 2006/07/13
• Re: [Amps] High frequency heater supplies, Val, 2006/07/14
• Re: [Amps] High frequency heater supplies, W7RY, 2006/07/14
  • [Amps] Switching Power Supplies, Jim Brown, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tom W8JI, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Keith Dutson, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tom W8JI, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Will Matney, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tony King - W4ZT, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Will Matney, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tony King - W4ZT, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Will Matney, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Steve Thompson, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tom W8JI, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Joe Isabella, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tom W8JI, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Will Matney, 2006/07/14
    • [Amps] Transformers, Tom W8JI, 2006/07/15
    • Re: [Amps] Transformers, Will Matney, 2006/07/15
    • Re: [Amps] Transformers, Tom W8JI, 2006/07/15
    • Re: [Amps] Transformers, Will Matney, 2006/07/15
    • Re: [Amps] Transformers, Will Matney, 2006/07/16
    • Re: [Amps] Transformers, Tom W8JI, 2006/07/16
    • Re: [Amps] Transformers, Will Matney, 2006/07/15
    • Re: [Amps] Transformers, Joe Isabella, 2006/07/15
    • Re: [Amps] Transformers, R L Measures, 2006/07/16
    • Re: [Amps] Switching Power Supplies, Steve Thompson, 2006/07/15
    • Re: [Amps] Switching Power Supplies, Harold Mandel, 2006/07/16
    • Re: [Amps] Switching Power Supplies, Steve Thompson, 2006/07/16
    • Re: [Amps] Switching Power Supplies, Tom W8JI, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tony King - W4ZT, 2006/07/15
    • Re: [Amps] Switching Power Supplies, Ian White GM3SEK, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Will Matney, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Tom W8JI, 2006/07/14
    • Re: [Amps] Switching Power Supplies, Ian White GM3SEK, 2006/07/15
  • Re: [Amps] High frequency heater supplies, Steve Thompson, 2006/07/14
  • Re: [Amps] High frequency heater supplies, m.ford, 2006/07/14

[Amps] FL-2100B, David Douglass, 2006/07/13

• Re: [Amps] FL-2100B, Tom W8JI, 2006/07/13

[Amps] FL2100B, carl s., 2006/07/11

• Re: [Amps] FL2100B, Tom W8JI, 2006/07/11
  • Re: [Amps] FL2100B, R L Measures, 2006/07/11
• Re: [Amps] FL2100B, Steve Katz, 2006/07/11
• Re: [Amps] FL2100B, Gudguyham, 2006/07/11
  • Re: [Amps] FL2100B, Will Matney, 2006/07/11

[Amps] TP9383/SD1460 used in 70MHz PA, Dick, 2006/07/11

• Re: [Amps] TP9383/SD1460 used in 70MHz PA, Fern Rivard, 2006/07/11
• Re: [Amps] TP9383/SD1460 used in 70MHz PA, Steve Thompson, 2006/07/12

[Amps] Silly question - interim report on results., Peter Chadwick, 2006/07/11

• Re: [Amps] Silly question - interim report on results., Tom W8JI, 2006/07/11
• Re: [Amps] Silly question - interim report on results., Peter Chadwick, 2006/07/11
  • Re: [Amps] Silly question - interim report on results., Tom W8JI, 2006/07/11
• Re: [Amps] Silly question - interim report on results., Peter Chadwick, 2006/07/11
  • Re: [Amps] Silly question - interim report on results., Harold Mandel, 2006/07/11
    • Re: [Amps] Silly question - interim report on results., Tom W8JI, 2006/07/11
    • Re: [Amps] Silly question - interim report on results., Harold Mandel, 2006/07/11

[Amps] Ferritronics FL2200m DBM for 4CX10,000amp, Don Moman VE6JY, 2006/07/11

• Re: [Amps] Ferritronics FL2200m DBM for 4CX10,000amp, Steve Thompson, 2006/07/11
• Re: [Amps] Ferritronics FL2200m DBM for 4CX10,000amp, m.ford, 2006/07/11
• Re: [Amps] Ferritronics FL2200m DBM for 4CX10,000amp, Peter Chadwick, 2006/07/11

[Amps] SD1460 BJT TSPA, John T. M. Lyles, 2006/07/10

• Re: [Amps] SD1460 BJT TSPA, m.ford, 2006/07/10

[Amps] 3CX1200D7 on eBay, Bob Maser, 2006/07/10

• Re: [Amps] 3CX1200D7 on eBay, Harold Mandel, 2006/07/10
• Re: [Amps] 3CX1200D7 on eBay, m.ford, 2006/07/10
• Re: [Amps] 3CX1200D7 on eBay, Dr. David Kirkby, 2006/07/10
  • Re: [Amps] 3CX1200D7 on eBay, John Vickers, 2006/07/10

[Amps] Mica cap substitute \ alternative, aborg, 2006/07/10

• Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 2006/07/10
  • Re: [Amps] Mica cap substitute \ alternative, R L Measures, 2006/07/10
• Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 2006/07/11
  • Re: [Amps] Mica cap substitute \ alternative, R L Measures, 2006/07/11
• Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 2006/07/12
  • Re: [Amps] Mica cap substitute \ alternative, R L Measures, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, R L Measures, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, Gary Smith, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, Harold Mandel, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, Ian White GM3SEK, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, m.ford, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, Ian White GM3SEK, 2006/07/13
    • Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, Joe Subich, W4TV, 2006/07/12
    • Re: [Amps] Mica cap substitute \ alternative, R L Measures, 2006/07/12
• Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 2006/07/13
  • Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 2006/07/13
    • Re: [Amps] Mica cap substitute \ alternative, R L Measures, 2006/07/13
  • Re: [Amps] Mica cap substitute \ alternative, Ian White GM3SEK, 2006/07/13
  • Re: [Amps] Mica cap substitute \ alternative, R L Measures, 2006/07/13
  • Re: [Amps] Mica cap substitute \ alternative, k7fm, 2006/07/13
• Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 2006/07/14

[Amps] Question about glowing 3-400z's, w2cqm@juno.com, 2006/07/09

• Re: [Amps] Question about glowing 3-400z's, Scott Townley, 2006/07/09
  • Re: [Amps] Question about glowing 3-400z's, Gary Smith, 2006/07/10
• Re: [Amps] Question about glowing 3-400z's, Tom W8JI, 2006/07/10
• [Amps] Question about glowing 3-400z's, Fern Rivard, 2006/07/10

[Amps] 813 amp, Will Matney, 2006/07/09

• Re: [Amps] 813 amp, Dr. David Kirkby, 2006/07/09

[Amps] Data sheet upload - can someone check it for me?, Dr. David Kirkby, 2006/07/09

• Re: [Amps] Data sheet upload - can someone check it for me?, Alek Petkovic, 2006/07/09
• Re: [Amps] Data sheet upload - can someone check it for me?, Will Matney, 2006/07/10
  • Re: [Amps] Data sheet upload - can someone check it for me?, Dr. David Kirkby, 2006/07/10
    • Re: [Amps] Data sheet upload - can someone check it for me?, Will Matney, 2006/07/10

[Amps] Hi-Pot Tester for sale, Gene Bigham, 2006/07/09

• Re: [Amps] Hi-Pot Tester for sale, R L Measures, 2006/07/10

Re: [Amps] *** SPAM *** Re[2]: QEX Innovative Tube Linear?, Peter Chadwick, 2006/07/09

• Re: [Amps] *** SPAM *** Re[2]: QEX Innovative Tube Linear?, Will Matney, 2006/07/09
• Re: [Amps] QEX Innovative Tube Linear?, Joe Subich, W4TV, 2006/07/09
  • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/09

[Amps] Datasheet limits, john, 2006/07/08

• Re: [Amps] Datasheet limits, Will Matney, 2006/07/08
• Re: [Amps] Datasheet limits, Peter Chadwick, 2006/07/09

[Amps] Hi-Pot Tester for sale, Angelo Karabetsos, 2006/07/08

• Re: [Amps] Hi-Pot Tester for sale, ToddRoberts2001, 2006/07/09
  • Re: [Amps] Hi-Pot Tester for sale, Will Matney, 2006/07/09
• Re: [Amps] Hi-Pot Tester for sale, Angelo Karabetsos, 2006/07/09

[Amps] 2kw sweep tube amp....again, Dick Hanson, 2006/07/07

• Re: [Amps] 2kw sweep tube amp....again, Michael Tope, 2006/07/07
• Re: [Amps] 2kw sweep tube amp....again, Will Matney, 2006/07/08
• Re: [Amps] 2kw sweep tube amp....again, ToddRoberts2001, 2006/07/07

[Amps] QEX Innovative Tube Linear?, zdtech, 2006/07/07

• Re: [Amps] QEX Innovative Tube Linear?, zdtech, 2006/07/07
  • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, R L Measures, 2006/07/08
    • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Tom W8JI, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Tom W8JI, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Tom W8JI, 2006/07/08
    • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/08
  • Message not available
    • Message not available
    • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Joe Subich, W4TV, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/07
    • Re: [Amps] QEX Innovative Tube Linear?, Bill Turner, 2006/07/08
  • Re: [Amps] QEX Innovative Tube Linear?, R L Measures, 2006/07/08
• Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/07
  • [Amps] WTB Vacuum Variable cap, Gary - N3JPU, 2006/07/07
• Re: [Amps] QEX Innovative Tube Linear?, Peter Chadwick, 2006/07/08
  • Re: [Amps] QEX Innovative Tube Linear?, Jim Tonne, 2006/07/08
  • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/08
  • Re: [Amps] QEX Innovative Tube Linear?, R L Measures, 2006/07/08
• Re: [Amps] QEX Innovative Tube Linear?, S. J. Blackwell, 2006/07/08
  • Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 2006/07/08

Re: [Amps] RE : Solid state amp, Will Matney, 2006/07/06

• Message not available
  • Re: [Amps] RE : Solid state amp, Will Matney, 2006/07/11
• Re: [Amps] RE : Solid state amp, Will Matney, 2006/07/12

[Amps] Solid state amp, Martin Sole, 2006/07/06

• Re: [Amps] Solid state amp, Keith LaBorde - K4KAL, 2006/07/06
• Re: [Amps] Solid state amp, Vic K2VCO, 2006/07/06
  • [Amps] RE : Solid state amp, hermans, 2006/07/06
    • Re: [Amps] RE : Solid state amp, Bert Almemo, 2006/07/06

Re: [Amps] New SGC Mini Lini Uses Class E Technology, Bill Fuqua, 2006/07/05

• Re: [Amps] New SGC Mini Lini Uses Class E Technology, Jim Tonne, 2006/07/05
• Re: [Amps] New SGC Mini Lini Uses Class E Technology, ToddRoberts2001, 2006/07/05

[Amps] Advanced Power Technologies ARF1505, mike kendall, 2006/07/05

• Re: [Amps] Advanced Power Technologies ARF1505, m.ford, 2006/07/05
• Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 2006/07/05
• Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 2006/07/05
• Re: [Amps] Advanced Power Technologies ARF1505, mike kendall, 2006/07/06
  • Re: [Amps] Advanced Power Technologies ARF1505, Steve Thompson, 2006/07/06
    • Re: [Amps] Advanced Power Technologies ARF1505, mike kendall, 2006/07/06
    • Re: [Amps] Advanced Power Technologies ARF1505, Steve Thompson, 2006/07/06
• Re: [Amps] Advanced Power Technologies ARF1505, Peter Chadwick, 2006/07/06
  • Re: [Amps] Advanced Power Technologies ARF1505, Steve Thompson, 2006/07/06
  • Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 2006/07/06
    • Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 2006/07/07

[Amps] GS35 144MHz amp faileur, how should we test it.....?, Robert Thain, 2006/07/05

• Re: [Amps] GS35 144MHz amp faileur, how should we test it.....?, Peter Chadwick, 2006/07/05
  • Re: [Amps] GS35 144MHz amp faileur, how should we test it.....?, David C. Hallam, 2006/07/05

Re: [Amps] L4-B Power Supply, Gudguyham, 2006/07/04

• Re: [Amps] L4-B Power Supply, dcoffman, 2006/07/12

[Amps] How to tune an FL-2100B, Dan Wright, 2006/07/04

• Re: [Amps] How to tune an FL-2100B, Tom W8JI, 2006/07/04
  • Re: [Amps] How to tune an FL-2100B, Dan Wright, 2006/07/04
    • Re: [Amps] How to tune an FL-2100B, Tom W8JI, 2006/07/04
  • Re: [Amps] How to tune an FL-2100B, R L Measures, 2006/07/05
• Re: [Amps] How to tune an FL-2100B, R L Measures, 2006/07/05

Re: [Amps] Bandwidth tests, Peter Chadwick, 2006/07/04

• Re: [Amps] Bandwidth tests, Jan Erik Holm, 2006/07/04
• Re: [Amps] Bandwidth tests, Tom W8JI, 2006/07/04
  • Re: [Amps] Bandwidth tests, Mark Hill, 2006/07/04
• Re: [Amps] Bandwidth tests, R L Measures, 2006/07/04
• Re: [Amps] Bandwidth tests, Peter Chadwick, 2006/07/04

[Amps] WTB: Johnson or Eimac tube socket, wc6w@juno.com, 2006/07/03

• Re: [Amps] WTB: Johnson or Eimac tube socket, m.ford, 2006/07/03

[Amps] how to estimate the Q of a tank circuit, Johan, 2006/07/03

• Re: [Amps] how to estimate the Q of a tank circuit, Tom W8JI, 2006/07/03
• Re: [Amps] how to estimate the Q of a tank circuit, R L Measures, 2006/07/03

[Amps] GS35B Amp 15 m Situation, Mike, 2006/07/02

• Re: [Amps] GS35B Amp 15 m Situation, Will Matney, 2006/07/02
  • Re: [Amps] GS35B Amp 15 m Situation, Phil Clements, 2006/07/03
  • Re: [Amps] GS35B Amp 15 m Situation, Mike, 2006/07/03
• Re: [Amps] GS35B Amp 15 m Situation, Tony King - W4ZT, 2006/07/02
  • Re: [Amps] GS35B Amp 15 m Situation, Mike, 2006/07/03
• Re: [Amps] GS35B Amp 15 m Situation, Tom W8JI, 2006/07/03

[Amps] W1XE, Bob Maser, 2006/07/02

• [Amps] W1XE, Bob Maser, 2006/07/02

[Amps] Again, Mike(W5UC) & Kathy(K5MWH), 2006/07/02

• Re: [Amps] Again, Michael Tope, 2006/07/02
• Re: [Amps] again, Roy Koeppe, 2006/07/02
  • Re: [Amps] again, Mike(W5UC) & Kathy(K5MWH), 2006/07/02
    • Re: [Amps] again, Larry Carman, 2006/07/02
    • Re: [Amps] again, Tom W8JI, 2006/07/03
• Re: [Amps] again, Peter Chadwick, 2006/07/03
  • Re: [Amps] again, Tom W8JI, 2006/07/03
    • Re: [Amps] again, R L Measures, 2006/07/03
    • Re: [Amps] again, Joe Subich, W4TV, 2006/07/03
    • [Amps] Efficiency, Tom W8JI, 2006/07/03

[Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick, 2006/07/02

• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 2006/07/03
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/03
    • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 2006/07/03
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick, 2006/07/03
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, David C. Hallam, 2006/07/03
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/03
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/03
    • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 2006/07/03
    • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/04
    • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 2006/07/04
    • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 2006/07/03
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Paul Christensen, 2006/07/03
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/04
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/04
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Tony King - W4ZT, 2006/07/04
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/04
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/04
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Mike Sawyer, 2006/07/04
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/04
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/05
    • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Smith, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/04
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Roger Parsons, 2006/07/05
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/06
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/05
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/06
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick, 2006/07/05
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Smith, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, ToddRoberts2001, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/05
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 2006/07/06
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/05
  • Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Smith, 2006/07/05
• Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 2006/07/05

Re: [Amps] Ideal bandswitch brand for 3 kW out Amp?, Frank Goenninger, 2006/07/02

• Re: [Amps] Ideal bandswitch brand for 3 kW out Amp?, R L Measures, 2006/07/02

[Amps] 4CX10 000J, pa3duv, 2006/07/02

• Re: [Amps] 4CX10 000J, Joe Subich, W4TV, 2006/07/02
  • Re: [Amps] 4CX10 000J, Peter Voelpel, 2006/07/02
    • Re: [Amps] 4CX10 000J, Joe Subich, W4TV, 2006/07/02
    • Re: [Amps] 4CX10 000J, Jan Erik Holm, 2006/07/02
    • Re: [Amps] 4CX10 000J, Peter Voelpel, 2006/07/02
    • Re: [Amps] 4CX10 000J, Jan Erik Holm, 2006/07/03
    • Re: [Amps] 4CX10 000J, R L Measures, 2006/07/03
    • Re: [Amps] 4CX10 000J / Racal MA1723, Mark Hill, 2006/07/03
    • Re: [Amps] 4CX10 000J / Racal MA1723, Peter Voelpel, 2006/07/04
    • [Amps] L4-B Power Supply, Tom Sessions, 2006/07/04
    • Re: [Amps] L4-B Power Supply, Vic K2VCO, 2006/07/04
    • Re: [Amps] L4-B Power Supply, R L Measures, 2006/07/05
    • [Amps] L4-B Power Supply, Tom Sessions, 2006/07/04
    • Re: [Amps] 4CX10 000J, Karl-Arne Markström, 2006/07/02
    • Re: [Amps] 4CX10 000J, zdtech, 2006/07/03
    • Re: [Amps] 4CX10 000J, Mark Hill, 2006/07/03
    • Re: [Amps] 4CX10 000J, Tom W8JI, 2006/07/03
    • Re: [Amps] 4CX10 000J, Vic K2VCO, 2006/07/03
    • Message not available
    • Re: [Amps] 4CX10,000J / Unwanted emissions, Mark Hill, 2006/07/03
    • Re: [Amps] 4CX10,000J / Unwanted emissions, Steve Thompson, 2006/07/03
  • Re: [Amps] 4CX10 000J, Dr. David Kirkby, 2006/07/02
  • Re: [Amps] 4CX10 000J, R L Measures, 2006/07/03

[Amps] Plate Load, Mike(W5UC) & Kathy(K5MWH), 2006/07/01

• Message not available
  • Re: [Amps] Plate Load, Mike(W5UC) & Kathy(K5MWH), 2006/07/01
    • Re: [Amps] Plate Load, Mike(W5UC) & Kathy(K5MWH), 2006/07/01

[Amps] 70MHz transistor PA, schematics??, Dick, 2006/07/01

• Re: [Amps] 70MHz transistor PA, schematics??, wc6w@juno.com, 2006/07/01
  • Re: [Amps] 70MHz transistor PA, schematics??, crawfish, 2006/07/01
• Re: [Amps] 70MHz transistor PA, schematics??, David Lisney, 2006/07/02

Re: [Amps] Mains Isolation Transformer, David Lisney, 2006/07/01

• Re: [Amps] Mains Isolation Transformer, Jim Brown, 2006/07/01
• Re: [Amps] Mains Isolation Transformer, Michael Tope, 2006/07/01
• Re: [Amps] Mains Isolation Transformer, Tom W8JI, 2006/07/01
• Re: [Amps] Mains Isolation Transformer, Gudguyham, 2006/07/01

[Amps] Maximum RF output in practical application: 4-250A, W.F van Wyk, 2006/07/01

• Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/01
• Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 2006/07/01
  • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/02
• Re: [Amps] Maximum RF output in practical application: 4-250A, Peter Chadwick, 2006/07/02
  • Re: [Amps] Maximum RF output in practical application: 4-250A, W.F van Wyk, 2006/07/02
• Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 2006/07/02
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 2006/07/02
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Vic K2VCO, 2006/07/02
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 2006/07/02
  • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, Bill L. Fuqua, 2006/07/02
• Re: [Amps] Maximum RF output in practical application: 4-250A, Peter Chadwick, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Steve Thompson, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, sm0aom, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, sm0aom, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, zdtech, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Tom W8JI, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Paul Christensen, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Tom W8JI, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Keith Dutson, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Chris Howard, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/04
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/04
    • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Paul Christensen, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, W2RU - Bud Hippisley, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Mike Sawyer, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, Peter Chadwick, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
    • [Amps] Bandwidth tests, Tom W8JI, 2006/07/03
    • Re: [Amps] Bandwidth tests, Joe Isabella, 2006/07/03
    • Re: [Amps] Bandwidth tests, Tom W8JI, 2006/07/03
    • Re: [Amps] Bandwidth tests, Michael Tope, 2006/07/03
    • Re: [Amps] Bandwidth tests, Tom W8JI, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Administrator, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 2006/07/03
    • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 2006/07/03
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, David G4FTC, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 2006/07/03
• Re: [Amps] Maximum RF output in practical application: 4-250A, Gudguyham, 2006/07/04
  • Re: [Amps] Maximum RF output in practical application: 4-250A, Tom W8JI, 2006/07/04
    • Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 2006/07/04

Re: [Amps] Deja vu all over again, Gudguyham, 2006/07/01

• Re: [Amps] Deja vu all over again, Tom W8JI, 2006/07/01
• Re: [Amps] Deja vu all over again, Harold B. Mandel, 2006/07/01
• Re: [Amps] Deja vu all over again, Gudguyham, 2006/07/01

[Amps] IM distortion and such, pa3duv, 2006/07/01

• Re: [Amps] IM distortion and such, k7fm, 2006/07/01
  • [Amps] Parasitcs, Tom W8JI, 2006/07/01
    • Re: [Amps] Parasitcs, Jan Erik Holm, 2006/07/02
    • Re: [Amps] Parasitcs, R L Measures, 2006/07/02

[Amps] Serious transformer problem, Borislav Trifonov, 2006/07/01

• Re: [Amps] Serious transformer problem, Will Matney, 2006/07/01
  • Re: [Amps] Serious transformer problem, Borislav Trifonov, 2006/07/01
    • Re: [Amps] Serious transformer problem, Will Matney, 2006/07/01
• Re: [Amps] Serious transformer problem, Tom W8JI, 2006/07/01
  • Re: [Amps] Serious transformer problem, Borislav Trifonov, 2006/07/01
  • Re: [Amps] Serious transformer problem, John E. Cleeve, 2006/07/01
    • Re: [Amps] Serious transformer problem, Tom W8JI, 2006/07/01
• Re: [Amps] Serious transformer problem, David C. Hallam, 2006/07/01
  • Re: [Amps] Serious transformer problem, Administrator, 2006/07/01
• Re: [Amps] Serious transformer problem, Gudguyham, 2006/07/01
• Re: [Amps] Serious transformer problem, John E . Cleeve, 2006/07/01