Amps
[Top] [All Lists]

Re: [Amps] Grid fuses (was: Life and gain of 3-500Z)

To: "Tom W8JI" <w8ji@w8ji.com>
Subject: Re: [Amps] Grid fuses (was: Life and gain of 3-500Z)
From: R L Measures <r@somis.org>
Date: Fri, 21 Jul 2006 06:53:35 -0700
List-post: <mailto:amps@contesting.com>
On Jul 21, 2006, at 6:28 AM, Tom W8JI wrote:

>> I could see this if the tube was operating and the
>> electrons were flowing between the cathode and grid then
>> back to the cathode via ground like it supposed to. Once
>> the fuse/resistor opens, the grid could be less some
>> electrons. Since the cathode is still emitting electrons
>> that are being drawn to the anode across the grid, the
>> grid would accept enough electrons to come into
>> equilibrium. I can't see it though taking more charge
>> after it's equalized, and just keep charging up to some
>> higher potential which is what I was talking about earlier
>> in other posts. That's just not possible, or I cant see it
>> would be. Equilibrium yes, but other no.
>
> Will,
>
> What you imagine happens runs contrary to how the systems
> actually behave in real life.
>
> 1.) The rated dissipation is determined by the point of
> secondary emission by heat. So if we trip the grid off from
> excess current in operation is tripping when the grid is
> acting like a cathode.
>
> 2.) During an arc or anode to grid fault, the tube has
> plasma or significant leakage path inside. Opening the grid
> does not instantly make that plasma or path open. This is
> especially true when a very poor fuse like a small resistor
> is used to interrupt a few kV of voltage.
>
> Surely you can see all that?

I can smell it, and it's fishy.
>
> 73,
> Tom
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

R L MEASURES, AG6K. 805-386-3734
r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>