> I have a 6N2 with an over voltage problem on the control
> circuit. The
> voltage is 20 volts ac at the fuse when it should be 12.
> Looking at the
> schematic the voltage is a leg from the transfomer to the
> fuse and then
> rectified to 12vdc. Has anyone had this problem or have
> any ideas to rectify
> the problem?
Can you post a schematic? Is this voltage from the main
transformer?
Are you sure your meter is correct? How are the other low
voltages like filament? Are they OK?
73 Tom
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|