Hi, Rick!
Try to look for the 24V/20A supplies and use two with series connection...
Kind regards,
Oleg
73 de UR3IQO
----- Original Message -----
From: "Anthony Rick" <asrick@gmail.com>
To: <amps@contesting.com>
Sent: Monday, April 07, 2008 7:34 PM
Subject: [Amps] Dual power supplies in EB104 4X MRF150 design
> Hi all,
>
> I'm working on building a solid state amp based on the EB104 design, and
> cheaply. The only constraint that is causing problems is the power
> supply. It appears that a single 50V/20A is going to be pretty expensive
> while 48V/10A supplies are readily available as telecom surplus for pretty
> cheap. Looking at the EB104 schematic (
> http://www.communication-concepts.com/eb104.htm) it seems probable to
> power
> each MOSFET pair from a separate supply with only the need for an
> additional
> isolation capacitor.
>
> Unfortunately the supplies I am seeing, usually Lambda, are not designed
> for
> parallel operation so that easy alternative is not an option.
>
> Any thoughts?
>
> Thanks,
>
> Anthony
> NR9R
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|