[Amps] Alpha PA-77 (not D or S) Questions, k6xx@juno.com, 2008/04/29

• Re: [Amps] Alpha PA-77 (not D or S) Questions, Paul Christensen, 2008/04/29
  • [Amps] Henry 3004A 70cm amp, Andy GD0TEP, 2008/04/30

[Amps] Subject: WTB: Legal Limit 6m Amplifier or Project, Merle Bone, 2008/04/29

• Re: [Amps] Subject: WTB: Legal Limit 6m Amplifier or Project, jeremy-ca, 2008/04/29

[Amps] Test, Harold Mandel, 2008/04/28

• Re: [Amps] Test, Gary Hinson, 2008/04/28

[Amps] Buck Boost, Barrie Smith, 2008/04/28

• Re: [Amps] Buck Boost, Patrick Egloff, 2008/04/28
• Re: [Amps] Buck Boost, Robert Groh, 2008/04/28
  • Re: [Amps] Buck Boost, jeremy-ca, 2008/04/28
    • Re: [Amps] Buck Boost, Barrie Smith, 2008/04/28

[Amps] turns counter, Steve Flood, 2008/04/25

• Re: [Amps] turns counter, Bob Maser, 2008/04/25

[Amps] tube socket differences, Larry, 2008/04/24

• Re: [Amps] tube socket differences, kenw2dtc, 2008/04/24

[Amps] current in primary of microwave oven transformer, Skip Macaulay, 2008/04/24

• [Amps] current in primary of microwave oven transformer, Tom Carney, 2008/04/25
• [Amps] current in primary of microwave oven transformer, Tom Carney, 2008/04/28

[Amps] 4-1000 HB amp, k1um, 2008/04/24

• Re: [Amps] 4-1000 HB amp, Dan Hearn, 2008/04/24

[Amps] HF Autoband AMp Prefences, jsternmd, 2008/04/23

• Re: [Amps] HF Autoband AMp Prefences, Lee Buller, 2008/04/23

[Amps] Dentron DTR 2000L Linear, Lee Buller, 2008/04/23

• Re: [Amps] Dentron DTR 2000L Linear, n8de, 2008/04/23
  • [Amps] Re2: Dentron DTR 2000L Linear, k9mk, 2008/04/23
• Re: [Amps] Dentron DTR 2000L Linear, Roger (K8RI), 2008/04/23
• Re: [Amps] Dentron DTR 2000L Linear, jeremy-ca, 2008/04/23

[Amps] Tl-922 plate meter protection, slonim aron, 2008/04/23

• Re: [Amps] Tl-922 plate meter protection, Missouri Guy, 2008/04/23
  • Re: [Amps] Tl-922 plate meter protection, Kees - pa7two, 2008/04/23

[Amps] current in primary of microwave oven transformer, Angel Vilaseca, 2008/04/23

• Re: [Amps] current in primary of microwave oven transformer, Dr. David Kirkby, 2008/04/23
  • Re: [Amps] current in primary of microwave oven transformer, Alex, 2008/04/23
    • Re: [Amps] current in primary of microwave oven transformer, Angel Vilaseca, 2008/04/24
    • Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 2008/04/24
    • Re: [Amps] current in primary of microwave oven transformer, Dr. David Kirkby, 2008/04/24
    • Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 2008/04/24
    • Re: [Amps] current in primary of microwave oven transformer, Alex, 2008/04/24
• Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 2008/04/23
• Re: [Amps] current in primary of microwave oven transformer, d.cutter, 2008/04/23
• Re: [Amps] current in primary of microwave oven transformer, d.cutter, 2008/04/24
  • Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 2008/04/24
• Re: [Amps] current in primary of microwave oven transformer, Manfred Mornhinweg, 2008/04/25
  • Re: [Amps] current in primary of microwave oven transformer, Dr. David Kirkby, 2008/04/26
  • Re: [Amps] current in primary of microwave oven transformer, Angel Vilaseca, 2008/04/28
    • Re: [Amps] current in primary of microwave oven transformer, Manfred Mornhinweg, 2008/04/28
    • Re: [Amps] current in primary of microwave oven transformer, Angel Vilaseca, 2008/04/29
• Re: [Amps] current in primary of microwave oven transformer, Steve Thompson, 2008/04/27

[Amps] need info re Eimac SK-416 chimney, Fern Rivard, 2008/04/21

• Re: [Amps] need info re Eimac SK-416 chimney, gdaught6, 2008/04/21
• Re: [Amps] need info re Eimac SK-416 chimney, kenw2dtc, 2008/04/21

[Amps] SB-200 RFC2 28uH choke, Mike Short, 2008/04/21

• Re: [Amps] SB-200 RFC2 28uH choke, jeremy-ca, 2008/04/22

Re: [Amps] Amps Digest, Vol 64, Issue 29, Mike Saculla, 2008/04/18

• Re: [Amps] Amps Digest, Vol 64, Issue 29, k7rdx, 2008/04/18
  • Re: [Amps] Amps Digest, Vol 64, Issue 29, DC, 2008/04/18

[Amps] Fabrication & part placement, kg7hf, 2008/04/17

• Re: [Amps] Fabrication & part placement, Colin Lamb, 2008/04/17
  • Re: [Amps] Fabrication & part placement, Bob Bruno - K2KI, 2008/04/17
  • Re: [Amps] Fabrication & part placement, jeremy-ca, 2008/04/17
• Re: [Amps] Fabrication & part placement, kg7hf, 2008/04/17
• Re: [Amps] Fabrication & part placement, Roger Parsons, 2008/04/18
  • Re: [Amps] Fabrication & part placement, gdaught6, 2008/04/18
    • Re: [Amps] Fabrication & part placement, Alex, 2008/04/18
• Re: [Amps] Fabrication & part placement, Manfred Mornhinweg, 2008/04/18

[Amps] Fw: AL-80A Problem, Mark McCloud, 2008/04/17

• Re: [Amps] Fw: AL-80A Problem, Ian White GM3SEK, 2008/04/18

Re: [Amps] 3 1/8 to 7/16 ?, Jeff Carter, 2008/04/16

• Re: [Amps] 3 1/8 to 7/16 ?, Andy GD0TEP, 2008/04/16

[Amps] 12v interruption, Larry Ravlin, 2008/04/16

• Re: [Amps] 12v interruption, jeremy-ca, 2008/04/16
  • Re: [Amps] 12v interruption, k7rdx, 2008/04/16
• Re: [Amps] 12v interruption, k7fm, 2008/04/16

[Amps] 3CX3000A7 input impedance, Bob Maser, 2008/04/16

• Re: [Amps] 3CX3000A7 input impedance, Phil Clements, 2008/04/16
  • Re: [Amps] 3CX3000A7 input impedance, Jan Erik Holm, 2008/04/17
    • Re: [Amps] 3CX3000A7 input impedance, jeremy-ca, 2008/04/17
    • Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, Peter Voelpel, 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, jeremy-ca, 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, Jim Tonne, 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, Roger (K8RI), 2008/04/21
    • Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 2008/04/21
• [Amps] 3CX3000A7 input impedance, Dick Hanson, 2008/04/16

[Amps] where to interrupt power, Larry Ravlin, 2008/04/15

• Re: [Amps] where to interrupt power, jeremy-ca, 2008/04/15
  • Re: [Amps] where to interrupt power, Mike, 2008/04/15

[Amps] More Peter Dalh stock, kingwood, 2008/04/15

• [Amps] 3 1/8 to 7/16 ?, Andy GD0TEP, 2008/04/15
  • Re: [Amps] 3 1/8 to 7/16 ?, Karl-Arne Markström, 2008/04/16
    • Re: [Amps] 3 1/8 to 7/16 ?, Andy GD0TEP, 2008/04/16
    • Re: [Amps] 3 1/8 to 7/16 ?, Jan Erik Holm, 2008/04/17
    • Re: [Amps] 3 1/8 to 7/16 ?, Jan Erik Holm, 2008/04/17
    • Re: [Amps] 3 1/8 to 7/16 ?, Jan Erik Holm, 2008/04/17

[Amps] Marshall 811A's and message from RF Parts, jeremy-ca, 2008/04/15

• Re: [Amps] Marshall 811A's and message from RF Parts, George, 2008/04/15

[Amps] Nut needed, RICHARD GEORGE, 2008/04/15

• [Amps] Abuse of a 4-1000, Paul Whatton, 2008/04/15

[Amps] gs35b tube, K8LEEWMM, 2008/04/12

• Re: [Amps] gs35b tube, Andy GD0TEP, 2008/04/12
• Re: [Amps] gs35b tube, Evert Bakker \(PA2KW\), 2008/04/12
• Re: [Amps] gs35b tube, Harry Brown, 2008/04/13

[Amps] filament voltage and current, kg7hf, 2008/04/11

• [Amps] Suggestions for Storage of Amps and Radios, TROY SINGLETON-N5ARK, 2008/04/11
  • Re: [Amps] Suggestions for Storage of Amps and Radios, Anthony Rick, 2008/04/11
    • Re: [Amps] Suggestions for Storage of Amps and Radios, Dr. David Kirkby, 2008/04/15
    • Re: [Amps] Suggestions for Storage of Amps and Radios, Mike, 2008/04/15
  • [Amps] Suggestions for Storage of Amps and Radios, Harold Mandel, 2008/04/11
    • Re: [Amps] Suggestions for Storage of Amps and Radios, Dan Hearn, 2008/04/11
    • Re: [Amps] Suggestions for Storage of Amps and Radios, TROY SINGLETON-N5ARK, 2008/04/11
• Re: [Amps] filament voltage and current, jeremy-ca, 2008/04/11
• Re: [Amps] filament voltage and current, kg7hf, 2008/04/11

[Amps] B minus connection, Steve Flood, 2008/04/11

• Re: [Amps] B minus connection, George, 2008/04/11

[Amps] Looking for a Amp Supply LK500C schematic?, Randy.Randall, 2008/04/11

• Re: [Amps] Looking for a Amp Supply LK500C schematic?, jeremy-ca, 2008/04/11

[Amps] Gonset 903a cure for self-oscillation?, Larry, 2008/04/10

• Re: [Amps] Gonset 903a cure for self-oscillation?, Steve Katz, 2008/04/11

[Amps] Bias Scheme, Lee Buller, 2008/04/10

• Re: [Amps] Bias Scheme, Robert Morris, 2008/04/10
• Re: [Amps] Bias Scheme, Lee Buller, 2008/04/10
• Re: [Amps] Bias Scheme, Steve Thompson, 2008/04/14

[Amps] 3-500Z filament voltage and current, Larry, 2008/04/10

• Re: [Amps] 3-500Z filament voltage and current, Chuck Curran, 2008/04/10
  • Re: [Amps] 3-500Z filament voltage and current, Larry, 2008/04/11

[Amps] AL-80A HV Glitch, Mark McCloud, 2008/04/10

• Re: [Amps] AL-80A HV Glitch, George, 2008/04/10
  • Re: [Amps] AL-80A HV Glitch, jeremy-ca, 2008/04/10
• Re: [Amps] AL-80A HV Glitch, Gudguyham, 2008/04/10

[Amps] Replacement of plate caps on glass tubes, K6QD, 2008/04/10

• Re: [Amps] Replacement of plate caps on glass tubes, Bob Bruno - K2KI, 2008/04/10
  • Re: [Amps] Replacement of plate caps on glass tubes, jeremy-ca, 2008/04/10
  • Re: [Amps] Replacement of plate caps on glass tubes, Kees - pa7two, 2008/04/10
• Re: [Amps] Replacement of plate caps on glass tubes, K6QD, 2008/04/11

[Amps] Replacing 811A with 572B, Bert Almemo, 2008/04/09

• Re: [Amps] Replacing 811A with 572B, Paul M Dunphy, 2008/04/09
  • Re: [Amps] Replacing 811A with 572B, Bert Almemo, 2008/04/09
• Re: [Amps] Replacing 811A with 572B, Scott Manthe, 2008/04/09
  • Re: [Amps] Replacing 811A with 572B, Bill Fuqua, 2008/04/09
  • Re: [Amps] Replacing 811A with 572B, k7fm, 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, Scott Manthe, 2008/04/09
• Re: [Amps] Replacing 811A with 572B, jeremy-ca, 2008/04/09
• Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 2008/04/09
  • Re: [Amps] Replacing 811A with 572B, Scott Manthe, 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, jeremy-ca, 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, Paul M Dunphy, 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, jeremy-ca, 2008/04/10
    • Re: [Amps] Replacing 811A with 572B, Peter Voelpel, 2008/04/10
    • Re: [Amps] Replacing 811A with 572B, jeremy-ca, 2008/04/10
    • Message not available
    • Re: [Amps] Replacing 811A with 572B//4CX800A, Peter Voelpel, 2008/04/10
    • Re: [Amps] Replacing 811A with 572B, Scott Manthe, 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 2008/04/10
    • Re: [Amps] Replacing 811A with 572B, Scott Manthe, 2008/04/10
    • Re: [Amps] Replacing 811A with 572B, jeremy-ca, 2008/04/10
  • Re: [Amps] Replacing 811A with 572B, Roger (K8RI), 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 2008/04/10
    • Re: [Amps] Replacing 811A with 572B, jeremy-ca, 2008/04/10
• Re: [Amps] Replacing 811A with 572B, Paul M Dunphy, 2008/04/09
  • Re: [Amps] Replacing 811A with 572B, Bill Fuqua, 2008/04/09
    • Re: [Amps] Replacing 811A with 572B, jeremy-ca, 2008/04/10

[Amps] mounting a vacuum cap, Steve Flood, 2008/04/08

• Re: [Amps] mounting a vacuum cap, Harold Mandel, 2008/04/08

[TenTec] LEGAL LIMIT PLUS AMP ALPHA 77D, W1dxh, 2008/04/07

• Re: [Amps] LEGAL LIMIT PLUS AMP ALPHA 77D, Jim Brown, 2008/04/07

[Amps] Viewstar PT 1000a, K4elv@bellsouth,net, 2008/04/07

• Re: [Amps] Viewstar PT 1000a, jeremy-ca, 2008/04/07
  • [Amps] Small crack on band switch, Andy Pfeiffer, 2008/04/07
    • Re: [Amps] Small crack on band switch, Anthony Rick, 2008/04/07
    • Re: [Amps] Small crack on band switch, jeremy-ca, 2008/04/07
    • Re: [Amps] Small crack on band switch, Anthony Rick, 2008/04/07
    • Re: [Amps] Small crack on band switch, George Cortez Jr, 2008/04/07
    • Re: [Amps] Small crack on band switch, Gary Smith, 2008/04/07
• Re: [Amps] Viewstar PT 1000a, W7RY, 2008/04/07
  • Re: [Amps] Viewstar PT 1000a, Mike, 2008/04/07
  • Re: [Amps] Viewstar PT 1000a, jerome schatten, 2008/04/07

[Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 2008/04/07

• Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Rob Frohne, 2008/04/07
• Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Oleg Skydan, 2008/04/09
  • Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 2008/04/09
• Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Steve Thompson, 2008/04/08
• Re: [Amps] Dual power supplies in EB104 4X MRF150 design, d.cutter, 2008/04/10
  • Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 2008/04/10
    • Message not available
    • Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 2008/04/10
    • Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Harold Mandel, 2008/04/10
    • Re: [Amps] Dual power supplies in EB104 4X MRF150 design, David Cutter, 2008/04/10
• Re: [Amps] Dual power supplies in EB104 4X MRF150 design, kg7hf, 2008/04/10

[Amps] HV step start, Steve Flood, 2008/04/05

• Re: [Amps] HV step start, Harold Mandel, 2008/04/07

[Amps] Glass Vs. Ceramic?, R. David Eagle, 2008/04/05

• Re: [Amps] Glass Vs. Ceramic?, Gary Smith, 2008/04/05
  • Re: [Amps] Glass Vs. Ceramic?, Gary Smith, 2008/04/05
• Re: [Amps] Glass Vs. Ceramic?, jeremy-ca, 2008/04/05

[Amps] Opinion on the AL800?, Lee Buller, 2008/04/03

• Re: [Amps] Opinion on the AL800?, jeremy-ca, 2008/04/03
• Re: [Amps] Opinion on the AL800?, Gary Smith, 2008/04/03
  • Re: [Amps] Opinion on the AL800?, gdaught6, 2008/04/03
    • Re: [Amps] Opinion on the AL800?, Gary Smith, 2008/04/03

[Amps] 8877 dishwasher?, Ed Stallman, 2008/04/03

• Re: [Amps] 8877 dishwasher?, jeremy-ca, 2008/04/03
• Re: [Amps] 8877 dishwasher?, Phil Clements, 2008/04/03
  • Re: [Amps] 8877 dishwasher?, Norman Hockler, 2008/04/03
• Re: [Amps] 8877 dishwasher?, Gudguyham, 2008/04/03

[Amps] Where do you buy tubes, Lee Buller, 2008/04/02

• Re: [Amps] Where do you buy tubes, jeremy-ca, 2008/04/02
• [Amps] YC-156 grid ring, Andy GD0TEP, 2008/04/02
  • Re: [Amps] YC-156 grid ring, Norman Hockler, 2008/04/02
    • Re: [Amps] YC-156 grid ring, Andy GD0TEP, 2008/04/03
    • Re: [Amps] YC-156 grid ring, Phil Clements, 2008/04/03
    • Re: [Amps] YC-156 grid ring, Andy GD0TEP, 2008/04/03
    • Re: [Amps] YC-156 grid ring, k7rdx, 2008/04/03
    • Re: [Amps] YC-156 grid ring, Norman Hockler, 2008/04/03
• Re: [Amps] Where do you buy tubes, Steve Katz, 2008/04/02

Re: [Amps] Amps Digest, Vol 64, Issue 5, Mike Willis, 2008/04/02

• Re: [Amps] Amps Digest, Vol 64, Issue 5, jeremy-ca, 2008/04/02

[Amps] Relay problems, Dan Hearn, 2008/04/02

• [Amps] 4pr1000 bias question, Andy GD0TEP, 2008/04/02
  • Re: [Amps] 4pr1000 bias question, jeremy-ca, 2008/04/02
  • Re: [Amps] 4pr1000 bias question, k7fm, 2008/04/02
    • Re: [Amps] 4pr1000 bias question, jeremy-ca, 2008/04/02
    • Re: [Amps] 4pr1000 bias question, k7fm, 2008/04/02
    • Re: [Amps] 4pr1000 bias question, jeremy-ca, 2008/04/02
• Re: [Amps] Relay problems, jeremy-ca, 2008/04/02

[Amps] Relays?? Try this sight, k1um, 2008/04/01

• Re: [Amps] Relays?? Try this sight, Dan Hearn, 2008/04/01
  • Re: [Amps] Relays?? Try this sight, Theo Bellamy, 2008/04/02

[Amps] relays, Dick Hanson, 2008/04/01

• Re: [Amps] Relays, Vic K2VCO, 2008/04/01
  • Re: [Amps] Relays, Kim Elmore, 2008/04/01
    • Re: [Amps] Relays, Alex, 2008/04/02
    • Re: [Amps] Relays, John/K4WJ, 2008/04/02
    • Re: [Amps] Relays, Alex, 2008/04/02
    • Re: [Amps] Relays, John/K4WJ, 2008/04/02
• Re: [Amps] Relays, d.cutter, 2008/04/02
  • Re: [Amps] Relays, Alex, 2008/04/02
    • Re: [Amps] Relays, R.C. Morris, 2008/04/02
    • Re: [Amps] Relays, jeremy-ca, 2008/04/02
    • Re: [Amps] Relays, Harold Mandel, 2008/04/02
    • Re: [Amps] Relays, Paul Christensen, 2008/04/02
    • Re: [Amps] Relays, Vic K2VCO, 2008/04/02
    • Re: [Amps] Relays, Paul Christensen, 2008/04/02
    • Re: [Amps] Relays, jeremy-ca, 2008/04/02
    • Re: [Amps] Relays, Vic K2VCO, 2008/04/02
    • Re: [Amps] Relays, Pat Barthelow, 2008/04/02
    • Re: [Amps] Relays, Alex, 2008/04/02
    • Re: [Amps] Relays, Roger (K8RI), 2008/04/02
• Re: [Amps] Relays, Greg - AB7R, 2008/04/02
  • Re: [Amps] Relays, Paul Kelley N1BUG, 2008/04/03
• Re: [Amps] Relays, TexasRF, 2008/04/02
  • Re: [Amps] Relays, jeremy-ca, 2008/04/02

[Amps] more Relays, kg7hf, 2008/04/01

• Re: [Amps] more Relays, n8de, 2008/04/01
• [Amps] re hv ps for 8877 amp, Fern Rivard, 2008/04/01
  • [Amps] Transformer for GLA1000 Needed, Adrian Rees, 2008/04/01
• Message not available
  • Re: [Amps] Relays, wa9jml, 2008/04/01
• Re: [Amps] more Relays, kg7hf, 2008/04/01
  • Re: [Amps] more Relays, jeremy-ca, 2008/04/01
• [Amps] more relays, kg7hf, 2008/04/01

[Amps] EMI Filtering, Steve Flood, 2008/04/01

• Re: [Amps] EMI Filtering, jeremy-ca, 2008/04/01
  • Re: [Amps] EMI Filtering, K6QD, 2008/04/01
• Re: [Amps] EMI Filtering, Jim Brown, 2008/04/01

[Amps] Amp Repair Services, MIKEHAACK, 2008/04/01

• Re: [Amps] Amp Repair Services, n8de, 2008/04/01
• Re: [Amps] Amp Repair Services, jeremy-ca, 2008/04/01