Wayne,
Have a look here for a socket.
http://gs35b.com/
Tubes are circa $100 a piece, and are good for 1.5kw on 6m, depending on
build.
Search the web for sites with a GS35 on 6m, there's plenty of them out
there.
If you plan on building one from scratch, get a good blower....
For control, I'd go for either the GM3SEK board from Ian, or the WD7S board
from Paul.
Cheers,
Andy
http://gd0tep.com
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of K8LEEWMM@aol.com
Sent: 12 April 2008 21:32
To: amps@contesting.com
Subject: [Amps] gs35b tube
any thoughts on using this tube on 50mhz, where to get tube, and socket.
any
one on six now with one?
thanks much
wayne k8lee
k8leewmm@aol.com
**************It's Tax Time! Get tips, forms and advice on AOL Money &
Finance. (http://money.aol.com/tax?NCID=aolcmp00300000002850)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|