Dave, I may have to do the "nut thing" as u say..... Thanks tip.
Charles Harpole k4vud@hotmail.com
Date: Mon, 11 Jan 2010 05:09:29 -0800
From: sootydave@yahoo.com
Subject: Re: [Amps] Need #9 Allen wrench MUCHO
To: k4vud@hotmail.com; amps@contesting.com
Charles
Have you tryed a hex bolt with a few nuts tightend onto the thread? i have used
this methade several times for those hard to find sizes.
just a thought.
73's
Dave kg4uxr
Brits with a southern call? how strange, only when you hear the accent.
see kg4uxr on :-
www.qrz.com/callsign/kg4uxr
From: Charles Harpole <k4vud@hotmail.com>
To: amps@contesting.com
Sent: Mon, January 11, 2010 5:49:21 AM
Subject: [Amps] Need #9 Allen wrench MUCHO
I have a serious need for a #9 Allen wrench or the English size just larger
than 5/16"...
I need to drain the Hub City brand worm gear box which is on the crank up
mechanism of my US Tower 70 ft.
As u may guess, a #10 is too big and I can not find a wrench smaller but larger
than a #8.
If you can get same for me, please mail to me at below and I will send you
money to pay back immediately.
A six or eight inch long wrench would be good, but I will take anything. If u
send in a bubble envelop, likely ok, and mark outside "used parts."
Help! HUGE THANKS, 73
Charles Harpole
P. O. Box 1, Nakhon Chaisi
Nakhon Pathom 73120
Thailand
Charles Harpole k4vud@hotmail.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|