[Amps] Tesla Effect - what the heck is that?, Robert Groh, 2010/01/31

• Re: [Amps] Tesla Effect - what the heck is that?, la7sl Nils Petter, 2010/01/31
• Re: [Amps] Tesla Effect - what the heck is that?, Fuqua, Bill L, 2010/01/31
  • Re: [Amps] Tesla Effect - what the heck is that?, Fuqua, Bill L, 2010/01/31
  • Re: [Amps] Tesla Effect - what the heck is that?, Robert Morris, 2010/01/31
• Re: [Amps] Tesla Effect - what the heck is that?, Dave White, 2010/01/31

Re: [Amps] Good amp to buy maybe build, Rob Atkinson, 2010/01/31

• Re: [Amps] Good amp to buy maybe build, James Colville, 2010/01/31
  • Re: [Amps] Good amp to buy maybe build, Bill, W6WRT, 2010/01/31

Re: [Amps] Good amp to buy (or something like that), Rob Atkinson, 2010/01/31

• Re: [Amps] Good amp to buy (or something like that), Gary Schafer, 2010/01/31
• Message not available
  • Re: [Amps] Good amp to buy (or something like that), Rob Atkinson, 2010/01/31
    • Re: [Amps] Good amp to buy (or something like that), Gary Schafer, 2010/01/31
    • Re: [Amps] Good amp to buy (or something like that), Bill, W6WRT, 2010/01/31
    • Re: [Amps] Good amp to buy (or something like that), Gary Schafer, 2010/01/31
    • Message not available
    • Re: [Amps] Good amp to buy (or something like that), Rob Atkinson, 2010/01/31

[Amps] Advice: harmonics from Alpha 91B on 160, gds, 2010/01/30

• Re: [Amps] Advice: harmonics from Alpha 91B on 160, Hardy Landskov, 2010/01/30
• Re: [Amps] Advice: harmonics from Alpha 91B on 160, Robert Groh, 2010/01/31
  • Re: [Amps] Advice: harmonics from Alpha 91B on 160, Larry Benko, 2010/01/31
    • Re: [Amps] Advice: harmonics from Alpha 91B on 160, Gary Schafer, 2010/01/31

[Amps] Tuning amplifiers, Ron Youvan, 2010/01/30

• Re: [Amps] Tuning amplifiers, Carl, 2010/01/30
  • Re: [Amps] Tuning amplifiers, Fuqua, Bill L, 2010/01/30
    • Re: [Amps] Tuning amplifiers, Fuqua, Bill L, 2010/01/30
    • Re: [Amps] Tuning amplifiers, Ron Youvan, 2010/01/30
    • Re: [Amps] Tuning amplifiers, Gary Schafer, 2010/01/30
• Re: [Amps] Tuning amplifiers, Gary Schafer, 2010/01/30

[Amps] 30S-1 Questions, Cecil Acuff, 2010/01/30

• Re: [Amps] 30S-1 Questions, Chuck Curran, 2010/01/30
• Re: [Amps] 30S-1 Questions, Gary Smith, 2010/01/30
• Re: [Amps] 30S-1 Questions, K8MLM, 2010/01/30

[Amps] Building an amp, Jim Thomson, 2010/01/30

• Re: [Amps] Building an amp, Robert Groh, 2010/01/30

[Amps] pulse tuning vs two-tone, Danny Pease, 2010/01/30

• Re: [Amps] pulse tuning vs two-tone, Gary Schafer, 2010/01/30

[Amps] Metal work., Jim Thomson, 2010/01/30

• Re: [Amps] Metal work., David Cutter, 2010/01/30
  • Re: [Amps] Metal work., Bill, W6WRT, 2010/01/30
• Re: [Amps] Metal work., Bill, W6WRT, 2010/01/30

[Amps] pulse tuning, Jim Thomson, 2010/01/30

• Re: [Amps] pulse tuning, Bill, W6WRT, 2010/01/30
• Re: [Amps] pulse tuning, Bill, W6WRT, 2010/01/30
• [Amps] Pulse tuning, Jim Thomson, 2010/01/30
  • Re: [Amps] Pulse tuning, Bill, W6WRT, 2010/01/30
  • Re: [Amps] Pulse tuning, Bill, W6WRT, 2010/01/30
  • Re: [Amps] Pulse tuning, Bill, W6WRT, 2010/01/30

[Amps] Fw: Good amp to buy /amp notes, Jim Thomson, 2010/01/30

• Re: [Amps] Fw: Good amp to buy /amp notes, Alek Petkovic, 2010/01/30
  • Re: [Amps] Fw: Good amp to buy /amp notes, Jim Thomson, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Alek Petkovic, 2010/01/30
• Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/30
  • Re: [Amps] Fw: Good amp to buy /amp notes, Alek Petkovic, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Ron Youvan, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Gary Schafer, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Roger, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Gary Schafer, 2010/01/31
    • Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/31
    • Re: [Amps] Fw: Good amp to buy /amp notes, Roger, 2010/01/31
    • Re: [Amps] Fw: Good amp to buy /amp notes, Gary Schafer, 2010/01/31
    • Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Roger, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Roger, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/30
    • Re: [Amps] Fw: Good amp to buy /amp notes, Ron Youvan, 2010/01/31
• Re: [Amps] Fw: Good amp to buy /amp notes, Rob Stampfli, 2010/01/31
• [Amps] Fw: Good amp to buy /amp notes, Jim Thomson, 2010/01/31
• Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/31
  • Re: [Amps] Fw: Good amp to buy /amp notes, Mike, 2010/01/31
    • Re: [Amps] Fw: Good amp to buy /amp notes, Gary Schafer, 2010/01/31
  • Re: [Amps] Fw: Good amp to buy /amp notes, Gary Schafer, 2010/01/31
• Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/31
  • Re: [Amps] Fw: Good amp to buy /amp notes, Gary Schafer, 2010/01/31
• Re: [Amps] Fw: Good amp to buy /amp notes, Bill, W6WRT, 2010/01/31
  • Re: [Amps] Fw: Good amp to buy /amp notes, Roger, 2010/01/31
    • Re: [Amps] Fw: Good amp to buy /amp notes, Rob Stampfli, 2010/01/31
    • [Amps] rig vary RF out, Charles Harpole, 2010/01/31

[Amps] Good amp to buy maybe build.., Robert Briggs, 2010/01/29

• Re: [Amps] Good amp to buy maybe build.., Bill, W6WRT, 2010/01/29
  • Re: [Amps] Good amp to buy maybe build.., Fuqua, Bill L, 2010/01/29
    • [Amps] Building an Amp & Metal Working is an Art., Roger, 2010/01/29
    • Re: [Amps] Building an Amp & Metal Working is an Art., Bill, W6WRT, 2010/01/30
    • Re: [Amps] Building an Amp & Metal Working is an Art., Carl, 2010/01/30
    • Message not available
    • Re: [Amps] here's some amplifier art to look at!!, Carl, 2010/01/30
    • Re: [Amps] here's some amplifier art to look at!!, Roger, 2010/01/30
    • Re: [Amps] here's some amplifier art to look at!!, Carl, 2010/01/30
    • Re: [Amps] Building an Amp & Metal Working is an Art., Roger, 2010/01/30
    • Re: [Amps] Building an Amp & Metal Working is an Art., Bill, W6WRT, 2010/01/30
    • Re: [Amps] Building an Amp & Metal Working is an Art., Fuqua, Bill L, 2010/01/30
    • Re: [Amps] Building an Amp & Metal Working is an Art., Fuqua, Bill L, 2010/01/30
  • Re: [Amps] Good amp to buy maybe build.., Jeff Blaine AC0C, 2010/01/29
    • Re: [Amps] Good amp to buy maybe build.., donroden, 2010/01/29
    • Re: [Amps] Good amp to buy maybe build.., Carl, 2010/01/30
    • Re: [Amps] Good amp to buy maybe build.., Phil Clements, 2010/01/30
  • Re: [Amps] Good amp to buy maybe build.., Roger, 2010/01/29
    • Re: [Amps] Good amp to buy maybe build.., Bill, W6WRT, 2010/01/30
  • Re: [Amps] Good amp to buy maybe build.., Ron Youvan, 2010/01/30
• Re: [Amps] Good amp to buy maybe build.., Carl, 2010/01/30
  • Re: [Amps] Good amp to buy maybe build.., Roger, 2010/01/30
  • Re: [Amps] Good amp to buy maybe build.., Bill, W6WRT, 2010/01/30
    • Re: [Amps] Good amp to buy maybe build.., Roger, 2010/01/30
    • Re: [Amps] Good amp to buy maybe build.., Bill, W6WRT, 2010/01/30
    • Re: [Amps] Good amp to buy maybe build.., Roger, 2010/01/30
    • Re: [Amps] Good amp to buy maybe build.., Bill, W6WRT, 2010/01/31
    • Re: [Amps] Good amp to buy maybe build.., Roger, 2010/01/31
    • Re: [Amps] Good amp to buy maybe build.., Edward Swynar, 2010/01/31
    • Re: [Amps] Good amp to buy maybe build.., Bill, W6WRT, 2010/01/31
  • Re: [Amps] Good amp to buy maybe build.., Edward Swynar, 2010/01/31

Re: [Amps] Silk screen alternatives, K1SG, 2010/01/29

• Re: [Amps] Silk screen alternatives, Alton McConnell, 2010/01/30
  • Re: [Amps] Silk screen alternatives, David Cutter, 2010/01/30
• Re: [Amps] Silk screen alternatives, Manfred Mornhinweg, 2010/01/30
  • Re: [Amps] Silk screen alternatives, Bill, W6WRT, 2010/01/30
    • Re: [Amps] Silk screen alternatives, Carl, 2010/01/31
• Re: [Amps] Silk screen alternatives, Manfred Mornhinweg, 2010/01/31
  • Re: [Amps] Silk screen alternatives, Bill, W6WRT, 2010/01/31

[Amps] Good amp to buy, Bill K2OWR, 2010/01/29

• [Amps] Good amp to buy, Randall, Randy, 2010/01/29
  • Re: [Amps] Good amp to buy, Randall, Randy, 2010/01/29
  • Re: [Amps] Good amp to buy, Carl, 2010/01/29

Re: [Amps] Good amp to buy maybe build?, Fuqua, Bill L, 2010/01/29

• Re: [Amps] Good amp to buy maybe build?, Bill K2OWR, 2010/01/29
• Re: [Amps] Good amp to buy maybe build?, ZL2AAA, 2010/01/29
  • Re: [Amps] Good amp to buy maybe build?, Barrie Smith, 2010/01/29
  • Re: [Amps] Good amp to buy maybe build?, Randall, Randy, 2010/01/29
    • Re: [Amps] Good amp to buy maybe build?, Edward Swynar, 2010/01/31
• Re: [Amps] Good amp to buy maybe build?, Rob Atkinson, 2010/01/29
  • Re: [Amps] Good amp to buy maybe build?, Carl, 2010/01/29
    • Re: [Amps] Good amp to buy maybe build?, Robert Morris, 2010/01/29
    • Re: [Amps] Amp panels - an alternative to silkscreening, k7fm, 2010/01/29
    • Re: [Amps] Amp panels - an alternative to silkscreening, Jim Barber, 2010/01/29
    • Re: [Amps] Good amp to buy maybe build?, Rob Atkinson, 2010/01/29
    • Re: [Amps] Good amp to buy maybe build?, Martin A Flynn, 2010/01/31
    • Re: [Amps] Good amp to buy maybe build?, Gary Schafer, 2010/01/31
  • Re: [Amps] Good amp to buy maybe build?, Ryan Foster, 2010/01/31
    • Re: [Amps] Good amp to buy maybe build?, Roger, 2010/01/31

[Amps] GS35B grid current, Gary Schafer, 2010/01/28

• Re: [Amps] GS35B grid current, jeff millar, 2010/01/30
  • Re: [Amps] GS35B grid current, Gary Schafer, 2010/01/30

[Amps] Plate Choke Resonances, Tim Long, 2010/01/28

• Re: [Amps] Plate Choke Resonances, James Colville, 2010/01/28
  • Re: [Amps] Plate Choke Resonances, Tim Long, 2010/01/28
    • Re: [Amps] Plate Choke Resonances, James Colville, 2010/01/28
    • Re: [Amps] Plate Choke Resonances, Carl, 2010/01/29
    • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/29
• Re: [Amps] Plate Choke Resonances, Jim Brown, 2010/01/29
  • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/29
    • Re: [Amps] Plate Choke Resonances, Carl, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Jim Brown, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Carl, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Gary Schafer, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Larry Benko, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Larry Benko, 2010/01/30
    • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Larry Benko, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Gary Schafer, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Roger, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Robert Groh, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, David Cutter, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Carl, 2010/01/31
    • Re: [Amps] Plate Choke Resonances, Gary Schafer, 2010/01/31
• Re: [Amps] Plate Choke Resonances, Carl, 2010/01/31
  • Re: [Amps] Plate Choke Resonances, Gary Schafer, 2010/01/31
• Re: [Amps] Plate Choke Resonances, Carl, 2010/01/31
• Re: [Amps] Plate Choke Resonances, Bill, W6WRT, 2010/01/31
  • Re: [Amps] Plate Choke Resonances, Gary Schafer, 2010/01/31

[Amps] More on the 811H, Daniel Hileman, 2010/01/27

• Re: [Amps] More on the 811H, Alek Petkovic, 2010/01/27
  • Re: [Amps] More on the 811H, Daniel Hileman, 2010/01/28
  • [Amps] Ameritron (et. al.) filament voltages, Rob Stampfli, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Roger D Johnson, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Alek Petkovic, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Roger, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Ron Youvan, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Roger, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Carl, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, Roger, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, Alek Petkovic, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Chuck Curran, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Rob Stampfli, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Joe Subich, W4TV, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Roger, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Carl, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, Roger, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, donroden, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, k7fm, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, Roger, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, David Cutter, 2010/01/28
    • Re: [Amps] Ameritron (et. al.) filament voltages, Paul Christensen, 2010/01/29
    • Re: [Amps] Ameritron (et. al.) filament voltages, Alek Petkovic, 2010/01/29

[Amps] 811H Plate Current, Daniel Hileman, 2010/01/27

• Re: [Amps] 811H Plate Current, Alek Petkovic, 2010/01/27

[Amps] Good amp to buy, Craig Taylor, 2010/01/26

• Re: [Amps] Good amp to buy, n8de, 2010/01/26
  • Re: [Amps] Good amp to buy, bill price, 2010/01/26
    • Re: [Amps] Good amp to buy, Roger, 2010/01/26
    • Re: [Amps] Good amp to buy, Carl, 2010/01/27
    • Re: [Amps] Good amp to buy, Bill, W6WRT, 2010/01/27
    • Re: [Amps] Good amp to buy, Carl, 2010/01/27
    • Re: [Amps] Good amp to buy, Bill, W6WRT, 2010/01/27
  • Re: [Amps] Good amp to buy, Dave Hachadorian, 2010/01/26
• Message not available
  • [Amps] Fwd: Good amp to buy, w1dxh, 2010/01/26
• Re: [Amps] Good amp to buy, Carl, 2010/01/27
• Re: [Amps] Good amp to buy, Gary Smith, 2010/01/27
  • Re: [Amps] Good amp to buy, Dave Hachadorian, 2010/01/27
    • Re: [Amps] Good amp to buy, Gary Smith, 2010/01/27
    • Re: [Amps] Good amp to buy, Dave Hachadorian, 2010/01/27
    • Re: [Amps] Good amp to buy, Gary Smith, 2010/01/27
    • Message not available
    • Re: [Amps] Good amp to buy, Gary Smith, 2010/01/27
  • Re: [Amps] Good amp to buy, Edward Swynar, 2010/01/29
    • Re: [Amps] Good amp to buy, Bill K2OWR, 2010/01/29
    • Re: [Amps] Good amp to buy, Roger, 2010/01/29
    • Re: [Amps] Good amp to buy, Carl, 2010/01/29
    • [Amps] 6C21, Barrie Smith, 2010/01/29
    • Re: [Amps] 6C21, Carl, 2010/01/29
    • Re: [Amps] 6C21, Fuqua, Bill L, 2010/01/29
    • Re: [Amps] 6C21, Barrie Smith, 2010/01/29
    • Re: [Amps] 6C21, Carl, 2010/01/29
    • Re: [Amps] 6C21, Roger, 2010/01/29
    • Re: [Amps] 6C21, Fuqua, Bill L, 2010/01/29
    • Re: [Amps] 6C21, Carl, 2010/01/29
    • Re: [Amps] 6C21, Carl, 2010/01/29
    • Re: [Amps] Good amp to buy, Carl, 2010/01/29
    • Re: [Amps] Good amp to buy, Lee Buller, 2010/01/29
    • Re: [Amps] Good amp to buy, Bill K2OWR, 2010/01/29
    • Re: [Amps] Good amp to buy, Carl, 2010/01/29
    • Re: [Amps] Good amp to buy, Randall, Randy, 2010/01/29
    • Re: [Amps] Good amp to buy, Carl, 2010/01/29
    • Re: [Amps] Good amp to buy, Lee Buller, 2010/01/29
    • Re: [Amps] Good amp to buy, Joe Subich, W4TV, 2010/01/29
    • Re: [Amps] Good amp to buy, Phil LaMarche, 2010/01/29
    • [Amps] Fw: Good amp to buy, david sutton, 2010/01/29
    • Re: [Amps] Fw: Good amp to buy, Dave Harmon, 2010/01/29
    • Re: [Amps] Good amp to buy, Gary K9GS, 2010/01/31
    • Re: [Amps] Good amp to buy, Carl, 2010/01/31
    • Re: [Amps] Good amp to buy, Gary K9GS, 2010/01/31
    • Re: [Amps] Good amp to buy, Roger, 2010/01/31
    • [Amps] why did Heath die?, Charles Harpole, 2010/01/31
    • Re: [Amps] why did Heath die?, Alek Petkovic, 2010/01/31
    • Re: [Amps] why did Heath die?, Fuqua, Bill L, 2010/01/31
    • Re: [Amps] why did Heath die?, Roger, 2010/01/31
    • [Amps] I dont accept answers to why did Heath die?, Charles Harpole, 2010/01/31
    • Re: [Amps] I dont accept answers to why did Heath die?, jeff millar, 2010/01/31
    • Re: [Amps] I dont accept answers to why did Heath die?, Glen Zook, 2010/01/31
    • Re: [Amps] I dont accept answers to why did Heath die?, Roger, 2010/01/31
    • Re: [Amps] I dont accept answers to why did Heath die?, David H Craig, 2010/01/31
    • Re: [Amps] I dont accept answers to why did Heath die?, Bill, W6WRT, 2010/01/31
    • Re: [Amps] I dont accept answers to why did Heath die?, Roger, 2010/01/31
    • Re: [Amps] I dont accept answers to why did Heath die?, Fuqua, Bill L, 2010/01/31
    • Re: [Amps] why did Heath die?, Glen Zook, 2010/01/31
• Re: [Amps] Good amp to buy, Rob Atkinson, 2010/01/27
• Re: [Amps] Good amp to buy, Rob Atkinson, 2010/01/28
• Re: [Amps] Good amp to buy, Val Erwin, 2010/01/29
  • Re: [Amps] Good amp to buy, Carl, 2010/01/29

[Amps] Ferrite sources, John Lyles, 2010/01/26

• Re: [Amps] Ferrite sources, Jim Brown, 2010/01/27

[Amps] 3 1/8 EIA flange adaptor wanted, Gary Schafer, 2010/01/26

• Re: [Amps] 3 1/8 EIA flange adaptor wanted, donroden, 2010/01/26
• Re: [Amps] 3 1/8 EIA flange adaptor wanted, Peter, 2010/01/26
  • Re: [Amps] 3 1/8 EIA flange adaptor wanted, Gary Schafer, 2010/01/28
    • Re: [Amps] 3 1/8 EIA flange adaptor wanted, Ron Youvan, 2010/01/28

[Amps] HELP Modifications for a Kenwood TL922, BEHIELS JEAN-PIERRE, 2010/01/26

• Re: [Amps] HELP Modifications for a Kenwood TL922, MIKE DURKIN, 2010/01/26
• Re: [Amps] HELP Modifications for a Kenwood TL922, Colin Lamb, 2010/01/26
  • Re: [Amps] HELP Modifications for a Kenwood TL922, Carl, 2010/01/26
    • Re: [Amps] HELP Modifications for a Kenwood TL922, on4aef, 2010/01/26
    • Re: [Amps] HELP Modifications for a Kenwood TL922, k7fm, 2010/01/26
    • Re: [Amps] HELP Modifications for a Kenwood TL922, Carl, 2010/01/27
    • Re: [Amps] HELP Modifications for a Kenwood TL922, Ron Youvan, 2010/01/27
• Re: [Amps] HELP Modifications for a Kenwood TL922, Colin Lamb, 2010/01/26
  • Re: [Amps] HELP Modifications for a Kenwood TL922, Carl, 2010/01/26
  • Re: [Amps] HELP Modifications for a Kenwood TL922, on4aef, 2010/01/26
    • Re: [Amps] HELP Modifications for a Kenwood TL922, Alek Petkovic, 2010/01/27

[Amps] Drake L-7 Not sure of hookup, Bob AD5VJ, 2010/01/26

• [Amps] Drake L-7 Not sure of hookup, Bob AD5VJ, 2010/01/26
• Re: [Amps] Drake L-7 Not sure of hookup, Gudguyham, 2010/01/26

[Amps] Henry 2KD input SWR, Donald Fox, 2010/01/25

• Re: [Amps] Henry 2KD input SWR, Roger, 2010/01/25
• Re: [Amps] Henry 2KD input SWR, James Colville, 2010/01/25

[Amps] Tl 922 amp. more problems......., Eduardo de Vera Mateo, 2010/01/25

• Re: [Amps] Tl 922 amp. more problems......., Eduardo de Vera Mateo, 2010/01/26

[Amps] Another massive transformer, n8de, 2010/01/25

• Re: [Amps] Another massive transformer, Carl, 2010/01/25

[Amps] RF issue, Charles Hedrick, 2010/01/25

• Re: [Amps] RF issue, Carl, 2010/01/25
  • Re: [Amps] RF issue, Mike, 2010/01/25
  • Re: [Amps] RF issue, donroden, 2010/01/25
• Re: [Amps] RF issue, Bill, W6WRT, 2010/01/25
• Re: [Amps] RF issue, LKBrownMD, 2010/01/25

[Amps] Layout of tube, MIKE DURKIN, 2010/01/25

• Message not available
  • Re: [Amps] Layout of tube, MIKE DURKIN, 2010/01/25
    • Re: [Amps] Layout of tube, James Colville, 2010/01/25
    • Re: [Amps] Layout of tube, vk3pa, 2010/01/25
    • Re: [Amps] Layout of tube, James Colville, 2010/01/25
    • Re: [Amps] Layout of tube, donroden, 2010/01/26
    • Re: [Amps] Layout of tube, Roger, 2010/01/26
    • Re: [Amps] Layout of tube, k7fm, 2010/01/26
    • Re: [Amps] Layout of tube, MIKE DURKIN, 2010/01/26
• Re: [Amps] Layout of tube, Phil Clements, 2010/01/25

[Amps] Henry 2KD Classic desktop input SWR issue, Donald Fox, 2010/01/25

• Re: [Amps] Henry 2KD Classic desktop input SWR issue, SECOPSYS, 2010/01/25

Re: [Amps] Source for large purchase of toroids?, gwatts, 2010/01/23

• Re: [Amps] Source for large purchase of toroids?, alexeban, 2010/01/23
  • Re: [Amps] Source for large purchase of toroids?, Jim Brown, 2010/01/23
    • Re: [Amps] Source for large purchase of toroids?, Dan, 2010/01/23
    • Re: [Amps] Source for large purchase of toroids?, James Colville, 2010/01/23
    • Re: [Amps] Source for large purchase of toroids?, Gary Schafer, 2010/01/25
    • Re: [Amps] Source for large purchase of toroids?, chas, 2010/01/26
    • Re: [Amps] Source for large purchase of toroids?, Jim Brown, 2010/01/26
• Re: [Amps] Source for large purchase of toroids?, Missouri Guy, 2010/01/23
• Re: [Amps] Source for large purchase of toroids?, Paul Decker, 2010/01/23
• Re: [Amps] Source for large purchase of toroids?, chas, 2010/01/26
• Re: [Amps] Source for large purchase of toroids?, Jim Barber, 2010/01/26
  • Message not available
    • Re: [Amps] Source for large purchase of toroids?, Jim Barber, 2010/01/26
  • Re: [Amps] Source for large purchase of toroids?, Ian White GM3SEK, 2010/01/26
  • Re: [Amps] Source for large purchase of toroids?, Jim Brown, 2010/01/26
    • Re: [Amps] Source for large purchase of toroids?, Jim Barber, 2010/01/26

[Amps] condition 4-1000A tubes?, Dennis A. Homerick, 2010/01/22

• Re: [Amps] condition 4-1000A tubes?, Dave White, 2010/01/23
• Re: [Amps] condition 4-1000A tubes?, k8mlm, 2010/01/23
  • Re: [Amps] condition 4-1000A tubes?, DAVE WHITE, 2010/01/23
    • Re: [Amps] condition 4-1000A tubes?, Fuqua, Bill L, 2010/01/23
• Re: [Amps] condition 4-1000A tubes?, k8mlm, 2010/01/23
  • Re: [Amps] condition 4-1000A tubes?, Alek Petkovic, 2010/01/23
  • Re: [Amps] condition 4-1000A tubes?, Fuqua, Bill L, 2010/01/26

[Amps] Alpha 78 Control Circuit 'Issue', Paul Gerhardt, 2010/01/21

• Re: [Amps] Alpha 78 Control Circuit 'Issue', Paul Gerhardt, 2010/01/21
• Re: [Amps] Alpha 78 Control Circuit 'Issue', Paul Gerhardt, 2010/01/22

[Amps] External QSK, Gary Smith, 2010/01/21

• Re: [Amps] External QSK, Paul Christensen, 2010/01/21

[Amps] Kenwood TL 922 Repair Manual for buy it...., Eduardo de Vera Mateo, 2010/01/21

• Re: [Amps] Kenwood TL 922 Repair Manual for buy it...., Eduardo de Vera Mateo, 2010/01/22

Re: [Amps] Need help with ARD 230A, k3rww, 2010/01/20

• Re: [Amps] Need help with ARD 230A, k3rww, 2010/01/20
  • Re: [Amps] Need help with ARD 230A, k3rww, 2010/01/20
    • Re: [Amps] Need help with ARD 230A, George, 2010/01/20

Re: [Amps] which HV connector to use?], Edward Swynar, 2010/01/20

• Re: [Amps] which HV connector to use?], Dr. David Kirkby, 2010/01/21
  • Re: [Amps] which HV connector to use?], Edward Swynar, 2010/01/23
    • Re: [Amps] which HV connector to use?], Bill VanAlstyne W5WVO, 2010/01/23
    • Re: [Amps] which HV connector to use?], Hardy Landskov, 2010/01/23
    • Re: [Amps] which HV connector to use?], Gary Hinson, 2010/01/24
    • [Amps] Massive transformer, Gary Patterson, 2010/01/25
    • Re: [Amps] Massive transformer, n8de, 2010/01/25
    • Re: [Amps] Massive transformer, Carl, 2010/01/25
    • Re: [Amps] Massive transformer, Robert Morris, 2010/01/25
    • Re: [Amps] Massive transformer, Roger, 2010/01/25
    • Re: [Amps] Massive transformer, Phil Clements, 2010/01/25
    • Re: [Amps] Massive transformer, Paul Kraemer, 2010/01/25
    • [Amps] Massive transformer...redux 106 pounds, Gary Patterson, 2010/01/25
    • Re: [Amps] Massive transformer...redux 106 pounds, Carl, 2010/01/25
    • Re: [Amps] Massive transformer...redux 106 pounds, Gary Patterson, 2010/01/25
    • [Amps] Gary Coffman KE4ZV, Gary Patterson, 2010/01/28

Re: [Amps] KK5DR's ferrite loaded, Manfred Mornhinweg, 2010/01/19

• Re: [Amps] KK5DR's ferrite loaded, Jim Brown, 2010/01/19
• Re: [Amps] KK5DR's ferrite loaded, Angel Vilaseca, 2010/01/20
  • Re: [Amps] KK5DR's ferrite loaded, MIKE DURKIN, 2010/01/20
  • Re: [Amps] KK5DR's ferrite loaded, JTB ô¿ô, 2010/01/20
    • [Amps] Amps for Sale, Roger, 2010/01/20
  • Re: [Amps] KK5DR's ferrite loaded, Jim Brown, 2010/01/22
    • [Amps] Source for large purchase of toroids?, chas, 2010/01/22
    • Re: [Amps] Source for large purchase of toroids?, alexeban, 2010/01/23
    • Re: [Amps] Source for large purchase of toroids?, Mark Beckwith, 2010/01/23
    • Re: [Amps] Source for large purchase of toroids?, Carl, 2010/01/23
• Re: [Amps] KK5DR's ferrite loaded, Manfred Mornhinweg, 2010/01/22

Re: [Amps] [CQ-Contest] K3 KIT PICTURES?, Felipe Ceglia - PY1NB, 2010/01/17

• Re: [Amps] [CQ-Contest] K3 KIT PICTURES?, Felipe Ceglia - PY1NB, 2010/01/17

[Amps] filament choke screws, Charles Hedrick, 2010/01/17

• Re: [Amps] filament choke screws, Carl, 2010/01/17
• Re: [Amps] filament choke screws, Bill, W6WRT, 2010/01/17
• Re: [Amps] filament choke screws, texasrf, 2010/01/17
• [Amps] Filament choke screws, Charles Hedrick, 2010/01/17

[Amps] Baffling DUAL HV problem ! We need some help., Jim Thomson, 2010/01/17

• Re: [Amps] Baffling DUAL HV problem ! We need some help., Gary Schafer, 2010/01/17

[Amps] KK5DR's ferrite loaded plate chokes., Jim Thomson, 2010/01/16

• Re: [Amps] KK5DR's ferrite loaded plate chokes., James Colville, 2010/01/16
  • Re: [Amps] KK5DR's ferrite loaded plate chokes., Jim Thomson, 2010/01/17
  • Re: [Amps] KK5DR's ferrite loaded plate chokes., Carl, 2010/01/17
• Re: [Amps] KK5DR's ferrite loaded plate chokes., Dr. David Kirkby, 2010/01/16
  • Re: [Amps] KK5DR's ferrite loaded plate chokes., Mike, 2010/01/16
  • Message not available
    • Re: [Amps] KK5DR's ferrite loaded plate chokes., Dr. David Kirkby, 2010/01/17
• [Amps] Amps for sale...maybe, Roger, 2010/01/16
  • Re: [Amps] Amps for sale...maybe, Alek Petkovic, 2010/01/17
    • Re: [Amps] Amps for sale...maybe, Glenn McNeil, 2010/01/17
    • Re: [Amps] Amps for sale...maybe, Doug Renwick, 2010/01/17
    • Re: [Amps] Amps for sale...maybe, Alex Eban, 2010/01/17
    • Re: [Amps] Amps for sale...maybe, Roger, 2010/01/17
• Re: [Amps] KK5DR's ferrite loaded plate chokes., Missouri Guy, 2010/01/16
  • Re: [Amps] KK5DR's ferrite loaded plate chokes., Jim Thomson, 2010/01/17
• Re: [Amps] KK5DR's ferrite loaded plate chokes., Manfred Mornhinweg, 2010/01/17
  • Re: [Amps] KK5DR's ferrite loaded plate chokes., Jim Brown, 2010/01/17

[Amps] 4CX300a Seal Leaks, John Finner, 2010/01/15

• Re: [Amps] 4CX300a Seal Leaks, Carl, 2010/01/16
  • Re: [Amps] 4CX300a Seal Leaks, John Finner, 2010/01/16
• Re: [Amps] 4CX300a Seal Leaks, texasrf, 2010/01/15
  • Re: [Amps] 4CX300a Seal Leaks, John Finner, 2010/01/16

[Amps] 8877 date codes, Dan, 2010/01/15

• Re: [Amps] 8877 date codes, Gary Schafer, 2010/01/15

[Amps] 8877 bad date codes, Gary Schafer, 2010/01/15

• Re: [Amps] 8877 bad date codes, Carl, 2010/01/15
  • Re: [Amps] 8877 bad date codes, Roger, 2010/01/15

[Amps] Plate chokes, Jim Thomson, 2010/01/15

• Re: [Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/15
• Re: [Amps] Plate chokes, Jim Thomson, 2010/01/16

[Amps] Source GU-84B fil xfmr, Roy, 2010/01/14

• Re: [Amps] Source GU-84B fil xfmr, Roger, 2010/01/14
• Re: [Amps] Source GU-84B fil xfmr, texasrf, 2010/01/14
  • Re: [Amps] Source GU-84B fil xfmr, James Colville, 2010/01/14

[Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/13

• Re: [Amps] (Perhaps) A plate choke too far ..., Angel Vilaseca, 2010/01/13
  • Re: [Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/14
    • Re: [Amps] (Perhaps) A plate choke too far ..., Larry, 2010/01/14
    • Re: [Amps] (Perhaps) A plate choke too far ..., Carl, 2010/01/14
    • [Amps] Chimney's, MIKE DURKIN, 2010/01/14
    • Re: [Amps] Chimney's, Mike McCarthy, W1NR, 2010/01/14
    • Re: [Amps] Chimney's, James Colville, 2010/01/14
    • Re: [Amps] Chimney's, Alex Eban, 2010/01/15
    • Re: [Amps] Chimney's, John E. Cleeve, 2010/01/14
    • Re: [Amps] Chimney's, Roger, 2010/01/14
    • Re: [Amps] Chimney's, Bill, W6WRT, 2010/01/14
    • Re: [Amps] Chimney's, ZL2AAA, 2010/01/14
    • Re: [Amps] Chimney's, Roger, 2010/01/15
    • Re: [Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/15
    • Re: [Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/14
    • Re: [Amps] (Perhaps) A plate choke too far ..., Gary Schafer, 2010/01/14
• Re: [Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/14
  • Re: [Amps] (Perhaps) A plate choke too far ..., James Colville, 2010/01/14
    • Re: [Amps] (Perhaps) A plate choke too far ..., Carl, 2010/01/14
    • Re: [Amps] (Perhaps) A plate choke too far ..., Bill, W6WRT, 2010/01/14
    • Re: [Amps] (Perhaps) A plate choke too far ..., Gary Schafer, 2010/01/14
    • Re: [Amps] (Perhaps) A plate choke too far ..., Dr. David Kirkby, 2010/01/16
    • Re: [Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/15
• Re: [Amps] (Perhaps) A plate choke too far ..., Radio WC6W, 2010/01/15

[Amps] BNC HV connectors, John E. Cleeve, 2010/01/13

• Re: [Amps] BNC HV connectors, RICHARD SOLOMON, 2010/01/13
• Re: [Amps] BNC HV connectors, Dr. David Kirkby, 2010/01/13

[Amps] Plate relay for NCL-2000, uoba, 2010/01/13

• Re: [Amps] Plate relay for NCL-2000, Roger, 2010/01/13
• Re: [Amps] Plate relay for NCL-2000, Carl, 2010/01/13

[Amps] NCL-2000 mods, jim feldman, 2010/01/13

• Re: [Amps] NCL-2000 mods, Steve Katz, 2010/01/13
  • Re: [Amps] NCL-2000 mods, jim feldman, 2010/01/13
    • Re: [Amps] NCL-2000 mods, Steve Katz, 2010/01/13
• Re: [Amps] NCL-2000 mods, Carl, 2010/01/13

[Amps] Failure: SB-220 bias supply (Harbach board), Bill VanAlstyne W5WVO, 2010/01/13

• Re: [Amps] Failure: SB-220 bias supply (Harbach board), Carl, 2010/01/13

[Amps] WTB 8877/3CX1500, Gary Schafer, 2010/01/13

• Re: [Amps] WTB 8877/3CX1500, Doug Renwick, 2010/01/13

[Amps] Single pole Millen HV connectors., Jim Thomson, 2010/01/13

• Re: [Amps] Single pole Millen HV connectors., Ian White GM3SEK, 2010/01/13

[Amps] Which HV connector to use., Jim Thomson, 2010/01/12

• Re: [Amps] Which HV connector to use., Carl, 2010/01/13
  • Re: [Amps] Which HV connector to use., Phil Clements, 2010/01/13
  • Re: [Amps] Which HV connector to use., Jim Thomson, 2010/01/13
• [Amps] Which HV connector to use., Jim Thomson, 2010/01/13
  • Re: [Amps] Which HV connector to use., Bill, W6WRT, 2010/01/13

[Amps] HV connector, John Lyles, 2010/01/12

• Re: [Amps] HV connector, K9FFK, 2010/01/16
  • Re: [Amps] HV connector, James Colville, 2010/01/16
• Re: [Amps] HV connector, texasrf, 2010/01/13

[Amps] Millen red /black HV connector's., Jim Thomson, 2010/01/12

• Re: [Amps] Millen red /black HV connector's., k7rdx, 2010/01/12
  • Re: [Amps] Millen red /black HV connector's., Jim Thomson, 2010/01/13

[Amps] Used tubes, MIKE DURKIN, 2010/01/12

• Re: [Amps] Used tubes, David H Craig, 2010/01/12
  • Re: [Amps] Used tubes, MIKE DURKIN, 2010/01/12
    • Re: [Amps] Used tubes, Jeff Blaine AC0C, 2010/01/13
    • Re: [Amps] Used tubes, MIKE DURKIN, 2010/01/13
• Re: [Amps] Used tubes, Roger, 2010/01/12

[Amps] which HV connector to use?, Felipe Ceglia - PY1NB, 2010/01/12

• Re: [Amps] which HV connector to use?, n8de, 2010/01/12
• Re: [Amps] which HV connector to use?, David H Craig, 2010/01/12
  • Re: [Amps] which HV connector to use?, k7rdx, 2010/01/12
    • Re: [Amps] which HV connector to use?, Carl, 2010/01/12
    • Re: [Amps] which HV connector to use?, Phil Clements, 2010/01/12
    • Re: [Amps] which HV connector to use?, Jim Barber, 2010/01/12
    • Re: [Amps] which HV connector to use?, RICHARD SOLOMON, 2010/01/12
    • Re: [Amps] which HV connector to use?, James Colville, 2010/01/12
    • Re: [Amps] which HV connector to use?, RICHARD SOLOMON, 2010/01/12
    • Re: [Amps] which HV connector to use?, James Colville, 2010/01/12
    • Re: [Amps] which HV connector to use?, Hardy Landskov, 2010/01/12
    • Re: [Amps] which HV connector to use?, Paul Christensen, 2010/01/12
    • Re: [Amps] which HV connector to use?, Ian White GM3SEK, 2010/01/12
    • Re: [Amps] which HV connector to use?, Craig, 2010/01/13
    • Re: [Amps] which HV connector to use?, RICHARD SOLOMON, 2010/01/13
    • Re: [Amps] which HV connector to use?, Ian White GM3SEK, 2010/01/13
    • Re: [Amps] which HV connector to use?, Ryan Foster, 2010/01/14
    • Re: [Amps] which HV connector to use?, Paul Christensen, 2010/01/12
    • Re: [Amps] which HV connector to use?, k7rdx, 2010/01/12
    • Re: [Amps] which HV connector to use?, Phil Clements, 2010/01/12
    • Re: [Amps] which HV connector to use?, k7rdx, 2010/01/12
    • Re: [Amps] which HV connector to use?, Carl, 2010/01/13
    • Re: [Amps] which HV connector to use?, k7rdx, 2010/01/13
    • Re: [Amps] which HV connector to use?, Carl, 2010/01/13
    • Re: [Amps] which HV connector to use?, Carl, 2010/01/12
• Re: [Amps] which HV connector to use?, Bill, W6WRT, 2010/01/12
• Re: [Amps] which HV connector to use?, Felipe Ceglia - PY1NB, 2010/01/13
• Re: [Amps] which HV connector to use?, Mark Hill, 2010/01/13
• Re: [Amps] which HV connector to use?, texasrf, 2010/01/13
  • Re: [Amps] which HV connector to use?, Bill, W6WRT, 2010/01/13
• Re: [Amps] which HV connector to use?, Rob Atkinson, 2010/01/14
  • Re: [Amps] which HV connector to use?, Ron Youvan, 2010/01/14
  • Re: [Amps] which HV connector to use?, Alex Eban, 2010/01/15
    • Re: [Amps] which HV connector to use?, Rob Atkinson, 2010/01/15
• Re: [Amps] which HV connector to use?, texasrf, 2010/01/14

[Amps] Emtron Australian Amps, Roger Cooper, 2010/01/12

• Re: [Amps] Emtron Australian Amps, Roger, 2010/01/12
  • Re: [Amps] Emtron Australian Amps, Doug Renwick, 2010/01/13

[Amps] Plate Chokes.... Yet Again...., James Colville, 2010/01/12

• Re: [Amps] Plate Chokes.... Yet Again...., Bill, W6WRT, 2010/01/12
  • Re: [Amps] Plate Chokes.... Yet Again...., James Colville, 2010/01/12

[Amps] Is this thing on?, James Colville, 2010/01/12

• Re: [Amps] Is this thing on?, Randall, Randy, 2010/01/12

[Amps] 9mm Allen, Richard Schmuke, 2010/01/11

• Re: [Amps] 9mm Allen, Charles Harpole, 2010/01/11

[Amps] WTB: 800 watt-1KW amp, Daniel Hileman, 2010/01/11

• Re: [Amps] WTB: 800 watt-1KW amp, Gary Smith, 2010/01/11
  • Re: [Amps] WTB: 800 watt-1KW amp, Carl, 2010/01/11
    • Re: [Amps] WTB: 800 watt-1KW amp, Gary Smith, 2010/01/11
    • Re: [Amps] WTB: 800 watt-1KW amp, Carl, 2010/01/11
    • Re: [Amps] WTB: 800 watt-1KW amp, n8de, 2010/01/11
    • Re: [Amps] WTB: 800 watt-1KW amp, James Colville, 2010/01/11
    • Re: [Amps] WTB: 800 watt-1KW amp, Jeff Blaine AC0C, 2010/01/11

[Amps] Manual..., Jim Dawson, 2010/01/10

• [Amps] Need #9 Allen wrench MUCHO, Charles Harpole, 2010/01/11
  • Re: [Amps] Need #9 Allen wrench MUCHO, david sutton, 2010/01/11
    • Re: [Amps] Need #9 Allen wrench MUCHO, Charles Harpole, 2010/01/11
    • Re: [Amps] Need #9 Allen wrench MUCHO, Robert Morris, 2010/01/11
    • Re: [Amps] Need #9 Allen wrench MUCHO, Charles Harpole, 2010/01/11
    • Re: [Amps] Need #9 Allen wrench MUCHO, James Colville, 2010/01/11
    • Re: [Amps] Need #9 Allen wrench, Charles Harpole, 2010/01/11
    • Re: [Amps] Need #9 Allen wrench, david sutton, 2010/01/11
    • Re: [Amps] Need #9 Allen wrench MUCHO, Charles Harpole, 2010/01/11
  • Re: [Amps] Need #9 Allen wrench MUCHO, Larry Benko, 2010/01/11

Re: [Amps] Ten Tec Centurion, Rob Atkinson, 2010/01/09

• Re: [Amps] Ten Tec Centurion, Bill, W6WRT, 2010/01/09
  • Re: [Amps] Ten Tec Centurion, Gary Smith, 2010/01/10

[Amps] alpha 76a, budi santoso, 2010/01/08

• Re: [Amps] alpha 87a warning, Charles Harpole, 2010/01/09
• Re: [Amps] alpha 76a, Carl, 2010/01/09
• Re: [Amps] alpha 76a, Jim Barber, 2010/01/09
  • Re: [Amps] alpha 76a, budi santoso, 2010/01/10

[Amps] trouble shooting Hunter 2000c, Charles Hedrick, 2010/01/08

• Re: [Amps] trouble shooting Hunter 2000c, Dave Hachadorian, 2010/01/08
• Re: [Amps] trouble shooting Hunter 2000c, Dave Hachadorian, 2010/01/08
• Re: [Amps] trouble shooting Hunter 2000c, TexasRF, 2010/01/08

Re: [Amps] Re Henry 2KD2 Amplifier, Gary Smith, 2010/01/08

• Re: [Amps] Re Henry 2KD2 Amplifier, JTB ô¿ô, 2010/01/08

Re: [Amps] What are the drawbacks of using a tube running, relatively low voltage and high current?, Manfred Mornhinweg, 2010/01/07

• Re: [Amps] What are the drawbacks of using a tube running, relatively low voltage and high current?, Roger, 2010/01/07

[Amps] Henry 2KD2 Amplifier, Jeff Maass, 2010/01/06

• Message not available
  • Message not available
    • [Amps] Re Henry 2KD2 Amplifier, Fern, 2010/01/07
    • Re: [Amps] Re Henry 2KD2 Amplifier, N7KA, 2010/01/07
    • Re: [Amps] Re Henry 2KD2 Amplifier, RICHARD SOLOMON, 2010/01/07
    • Re: [Amps] Re Henry 2KD2 Amplifier, Roger, 2010/01/07
    • Re: [Amps] Re Henry 2KD2 Amplifier, Carl, 2010/01/08
    • Re: [Amps] Re Henry 2KD2 Amplifier, Carl, 2010/01/08

[Amps] Henry 2KD2 Amplifier, Daniel Hileman, 2010/01/06

• Re: [Amps] Henry 2KD2 Amplifier, vk3pa, 2010/01/06
• Re: [Amps] Henry 2KD2 Amplifier, Gudguyham, 2010/01/06

[Amps] L section of Pi-L filter, Ulf Tjerneld, 2010/01/06

• Re: [Amps] L section of Pi-L filter, Karl-Arne Markström, 2010/01/06
  • Re: [Amps] L section of Pi-L filter, Carl, 2010/01/06
  • Re: [Amps] L section of Pi-L filter, Jeff Blaine AC0C, 2010/01/06
    • [Amps] What are the drawbacks of using a tube running relatively low voltage and high current?, Roger, 2010/01/06

[Amps] GU 74 operating parameters, Ulf Tjerneld, 2010/01/06

• Re: [Amps] GU 74 operating parameters, Dave Hachadorian, 2010/01/06
• Re: [Amps] GU 74 operating parameters, Karl-Arne Markström, 2010/01/06
  • Re: [Amps] GU 74 operating parameters, Jim Tonne, 2010/01/06
  • Re: [Amps] GU 74 operating parameters, DF3KV, 2010/01/06
    • Re: [Amps] GU 74 operating parameters, Carl, 2010/01/06
  • Re: [Amps] GU 74 operating parameters, Bill, W6WRT, 2010/01/06
    • Re: [Amps] GU 74 operating parameters, Ulf Tjerneld, 2010/01/07

[Amps] FAN CFM, MIKE DURKIN, 2010/01/04

• Re: [Amps] FAN CFM, Roger, 2010/01/04
  • [Amps] FAN CFM, MIKE DURKIN, 2010/01/04

[Amps] AL 811 Tuned input/output issue, David N., 2010/01/04

• Re: [Amps] AL 811 Tuned input/output issue, Ryan Foster, 2010/01/04

[Amps] Right mounting of HV oilfilled C's?, Thomas Hoeppe, 2010/01/04

• Re: [Amps] Right mounting of HV oilfilled C's?, Karl-Arne Markström, 2010/01/04
  • Re: [Amps] Right mounting of HV oilfilled C's?, Carl, 2010/01/04
• Re: [Amps] Right mounting of HV oilfilled C's?, Thomas Hoeppe, 2010/01/04

[Amps] Alpha 87A Alphamax upgrade, kk2ed, 2010/01/02

• Re: [Amps] Alpha 87A Alphamax upgrade, Dick Green WC1M, 2010/01/04
  • Re: [Amps] Alpha 87A Alphamax upgrade, kk2ed, 2010/01/04
    • Re: [Amps] Alpha 87A Alphamax upgrade, Roger, 2010/01/05

[Amps] 813's on 160., jerome schatten, 2010/01/01

• Re: [Amps] 813's on 160., Carl, 2010/01/01
• Re: [Amps] 813's on 160., Bill, W6WRT, 2010/01/01

[Amps] What is Svetlana 4CX1600B Worth?, Jeff Maass, 2010/01/01

• Re: [Amps] What is Svetlana 4CX1600B Worth?, Alek Petkovic, 2010/01/01
  • Re: [Amps] What is Svetlana 4CX1600B Worth?, Jeff Maass, 2010/01/01
    • Re: [Amps] What is Svetlana 4CX1600B Worth?, Alek Petkovic, 2010/01/01