[Amps] Help identifying tubes, mike stokes, 2010/11/28

• Re: [Amps] [Bulk] Help identifying tubes, Bill Coleman, 2010/11/28
  • Re: [Amps] [Bulk] Help identifying tubes, Roger, 2010/11/28
  • Re: [Amps] [Bulk] Help identifying tubes, Jim W7RY, 2010/11/28
• Re: [Amps] [Bulk] Help identifying tubes, Bill Coleman, 2010/11/28
  • Re: [Amps] [Bulk] Help identifying tubes, Shane Youhouse, 2010/11/29
• Re: [Amps] Help identifying tubes, Ken Brown, 2010/11/28
  • Re: [Amps] Help identifying tubes, Patrick Barthelow, 2010/11/28
• Message not available
  • Re: [Amps] Help identifying tubes, Alek Petkovic, 2010/11/29
    • Re: [Amps] Help identifying tubes, Carl, 2010/11/29
• Re: [Amps] Help identifying tubes, N7KA, 2010/11/28
• Re: [Amps] Help identifying tubes, John Becker, 2010/11/29
  • Re: [Amps] Help identifying tubes, Glen Zook, 2010/11/30

[Amps] W3NQN bandpass filters, question., Martin Sole, 2010/11/27

• Re: [Amps] W3NQN bandpass filters, question., Larry Benko, 2010/11/27
• Re: [Amps] W3NQN bandpass filters, question., Jim Tonne, 2010/11/28
• Re: [Amps] W3NQN bandpass filters, question., Ron Youvan, 2010/11/28

[Amps] AL-811H with 572's question, Hector Garcia XE2K, 2010/11/27

• Re: [Amps] AL-811H with 572's question, Hal W5GHZ, 2010/11/27

[Amps] GS35b teflon chimney, Allan Greening, 2010/11/26

• Re: [Amps] GS35b teflon chimney, Bill, W6WRT, 2010/11/26
  • Re: [Amps] GS35b teflon chimney, MIKE DURKIN, 2010/11/27
    • Re: [Amps] GS35b teflon chimney, Larry, 2010/11/27

[Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?, mikflathead, 2010/11/26

• Re: [Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?, Carl, 2010/11/26
• Re: [Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?, Larry Burke, 2010/11/26
• Re: [Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?, Charles Harpole, 2010/11/26

[Amps] A dual 4-1000 amp, Patrick, 2010/11/25

• Re: [Amps] A dual 4-1000 amp, kf8od, 2010/11/26
• Re: [Amps] A dual 4-1000 amp, donroden, 2010/11/26
  • Re: [Amps] A dual 4-1000 amp, Roger (K8RI), 2010/11/26
• Re: [Amps] A dual 4-1000 amp, Fuqua, Bill L, 2010/11/26
  • Re: [Amps] A dual 4-1000 amp, Patrick, 2010/11/26
    • Re: [Amps] A dual 4-1000 amp, Fuqua, Bill L, 2010/11/26
  • Re: [Amps] A dual 4-1000 amp, Roger (K8RI), 2010/11/26
• Re: [Amps] A dual 4-1000 amp, TexasRF, 2010/11/26
  • Re: [Amps] A dual 4-1000 amp, Carl, 2010/11/26
    • Re: [Amps] A dual 4-1000 amp, Jim Barber, 2010/11/26
    • Re: [Amps] A dual 4-1000 amp, Carl, 2010/11/26
• [Amps] A dual 4-1000 amp, Jim Thomson, 2010/11/26
  • [Amps] Transformer question, George, 2010/11/26
  • [Amps] Transformer help please, George, 2010/11/29
    • [Amps] Transformer help please, F?a???ad???? ?a?a???t??, 2010/11/29
• [Amps] A dual 4-1000 amp, Jim Thomson, 2010/11/27
• Re: [Amps] A dual 4-1000 amp, Rob Atkinson, 2010/11/27

[Amps] MOVs, Jim Thomson, 2010/11/25

• Re: [Amps] MOVs, Roger, 2010/11/25
• [Amps] MOVs, Jim Thomson, 2010/11/26

[Amps] Silicon Carbide J-FET, Hsu, 2010/11/25

• [Amps] Silicon Carbide J-FET, John Lyles, 2010/11/25
  • Re: [Amps] Silicon Carbide J-FET, Baruch Zilbershatz, 2010/11/25
    • Re: [Amps] Silicon Carbide J-FET, Hsu, 2010/11/25
• Re: [Amps] Silicon Carbide J-FET, Baruch Zilbershatz, 2010/11/25
• Re: [Amps] Silicon Carbide J-FET, Baruch Zilbershatz, 2010/11/25
• Re: [Amps] Silicon Carbide J-FET, Baruch Zilbershatz, 2010/11/25

[Amps] 240 vac primary protection..again, Jim Thomson, 2010/11/25

• [Amps] MOVs, Ken Brown, 2010/11/25
  • Re: [Amps] MOVs, Roger, 2010/11/25
    • Re: [Amps] MOVs, David Cutter, 2010/11/25
    • Re: [Amps] MOVs, Roger, 2010/11/25
    • Re: [Amps] MOVs, David Cutter, 2010/11/25
    • Re: [Amps] MOVs, Roger, 2010/11/25
  • Re: [Amps] MOVs, Carl, 2010/11/25
• Re: [Amps] 240 vac primary protection..again, Carl, 2010/11/25

[Amps] LK550 neg grid ... and bandswitch woes, Gary Hinson, 2010/11/24

• Re: [Amps] LK550 neg grid ... and bandswitch woes, Carl, 2010/11/25
• Re: [Amps] LK550 neg grid ... and bandswitch woes, Ken Nicely, 2010/11/25
• Re: [Amps] LK550 neg grid ... and bandswitch woes, Gudguyham, 2010/11/25

Re: [Amps] 1800 Watt Henry 2K4, Its from KE4VYN, 2010/11/24

• Re: [Amps] 1800 Watt Henry 2K4, Roger, 2010/11/24

[Amps] What a shame..., Roger, 2010/11/24

• Re: [Amps] What a shame..., Mike, 2010/11/24
• Re: [Amps] What a shame..., Paul Kraemer, 2010/11/24
  • Re: [Amps] What a shame..., Carl, 2010/11/24
    • Re: [Amps] What a shame..., Jeff Carter, 2010/11/24
    • Re: [Amps] What a shame..., Roger, 2010/11/24
    • Re: [Amps] What a shame..., Richard Solomon, 2010/11/24
    • Re: [Amps] What a shame..., Carl, 2010/11/24
    • Re: [Amps] What a shame..., Gary K9GS, 2010/11/24
• Re: [Amps] What a shame..., donroden, 2010/11/24
• Re: [Amps] What a shame..., Gudguyham, 2010/11/25
  • Re: [Amps] What a shame..., Carl, 2010/11/25

[Amps] Allied, Doug, 2010/11/24

• Re: [Amps] Allied, n8de, 2010/11/24
  • Re: [Amps] Allied, donroden, 2010/11/24

[Amps] Tube Cooling.., Robert Briggs, 2010/11/22

• Re: [Amps] Tube Cooling.., Carl, 2010/11/23
  • Re: [Amps] Tube Cooling.., Roger (sub1), 2010/11/23
    • Re: [Amps] Tube Cooling.., DAVE WHITE, 2010/11/23
    • Re: [Amps] Tube Cooling.., Carl, 2010/11/23
    • Re: [Amps] Tube Cooling.., DJ7WW, 2010/11/23
    • Re: [Amps] Tube Cooling.., Bill, W6WRT, 2010/11/24
    • Re: [Amps] Tube Cooling.., Roger, 2010/11/25
    • Re: [Amps] Tube Cooling.., Alek Petkovic, 2010/11/25
    • Re: [Amps] Tube Cooling.., Roger, 2010/11/25
• Re: [Amps] Tube Cooling.., Baruch Zilbershatz, 2010/11/25
  • Re: [Amps] Tube Cooling.., Roger, 2010/11/25
    • [Amps] Insulation tester, donroden, 2010/11/25
    • Re: [Amps] Insulation tester, donroden, 2010/11/26
    • Re: [Amps] Insulation tester, Carl, 2010/11/26
    • Re: [Amps] Insulation tester, Bill, W6WRT, 2010/11/27
    • Re: [Amps] Insulation tester, Larry Benko, 2010/11/26
    • Re: [Amps] Tube Cooling.., Hsu, 2010/11/25
• [Amps] Tube Cooling.., Jim Thomson, 2010/11/25
  • Re: [Amps] Tube Cooling.., Carl, 2010/11/26
    • Re: [Amps] Tube Cooling.., Bill, W6WRT, 2010/11/26
    • Re: [Amps] Tube Cooling.., Ian White GM3SEK, 2010/11/27
    • Re: [Amps] Tube Cooling.., Carl, 2010/11/27
    • Re: [Amps] Tube Cooling.., Ian White GM3SEK, 2010/11/27
    • Re: [Amps] Tube Cooling.., DJ7WW, 2010/11/27
    • [Amps] You can't make these up..., Shane Youhouse, 2010/11/27
    • Re: [Amps] Tube Cooling.., Carl, 2010/11/27
    • Re: [Amps] Tube Cooling.., Ian White GM3SEK, 2010/11/27
    • Re: [Amps] Tube Cooling.., Carl, 2010/11/27

[Amps] brass or BNP hardware, Mike Saculla, 2010/11/22

• Re: [Amps] brass or BNP hardware, pfizenmayer, 2010/11/23

[Amps] Tube Cooling, Lee Buller, 2010/11/22

• Re: [Amps] Tube Cooling, Roland AH6RR, 2010/11/23
  • Re: [Amps] Tube Cooling, Dave M, 2010/11/23
    • Re: [Amps] Tube Cooling, Jeff Blaine, 2010/11/23
• [Amps] Tube Cooling, Robert Briggs, 2010/11/25
  • Re: [Amps] Tube Cooling, Carl, 2010/11/25
  • Re: [Amps] Tube Cooling, Angel Vilaseca, 2010/11/25
• [Amps] Tube cooling, Robert Briggs, 2010/11/25
  • Re: [Amps] Tube cooling, Roger, 2010/11/25
• [Amps] Tube Cooling, Robert Briggs, 2010/11/25
  • Re: [Amps] Tube Cooling, Carl, 2010/11/26

[Amps] 1800 Watt Henry 2K4?, Roger (sub1), 2010/11/21

• Re: [Amps] 1800 Watt Henry 2K4?, Mike, 2010/11/21
  • Re: [Amps] 1800 Watt Henry 2K4?, Hal W5GHZ, 2010/11/22
• Re: [Amps] 1800 Watt Henry 2K4?, Shane Youhouse, 2010/11/21
  • Re: [Amps] 1800 Watt Henry 2K4?, Carl, 2010/11/22
    • Re: [Amps] 1800 Watt Henry 2K4?, Hal W5GHZ, 2010/11/23
    • Re: [Amps] 1800 Watt Henry 2K4?, Jeff Blaine, 2010/11/23
    • Re: [Amps] 1800 Watt Henry 2K4?, Roger, 2010/11/23
    • Re: [Amps] 1800 Watt Henry 2K4?, Jeff Blaine, 2010/11/24

[Amps] MLA2500 meter needed, Eric Dobrowansky K2WD, 2010/11/20

• Re: [Amps] MLA2500 meter needed, Carl, 2010/11/20
  • Re: [Amps] MLA2500 meter needed, Eric Dobrowansky K2WD, 2010/11/20

[Amps] Mc-Master Carr issue, Alf Pousar, 2010/11/19

• [Amps] Dentron DTR-2000L Tank Circuit, Mike & Becca Krzystyniak, 2010/11/22
  • Re: [Amps] Dentron DTR-2000L Tank Circuit, Carl, 2010/11/22

[Amps] Scanned Ad Needed., Michael Baker, 2010/11/19

• Re: [Amps] Scanned Ad Needed., Mike, 2010/11/19

[Amps] brass or BNP hardware, John Lyles, 2010/11/19

• [Amps] brass or BNP hardware, Jim Thomson, 2010/11/22
• Re: [Amps] brass or BNP hardware, TexasRF, 2010/11/23
  • Re: [Amps] brass or BNP hardware, Carl, 2010/11/23
    • Re: [Amps] brass or BNP hardware, DJ7WW, 2010/11/23
    • Re: [Amps] brass or BNP hardware, Shane Youhouse, 2010/11/23
    • Re: [Amps] brass or BNP hardware, Carl, 2010/11/23
    • Re: [Amps] brass or BNP hardware, DJ7WW, 2010/11/23
    • Re: [Amps] brass or BNP hardware, Roger (sub1), 2010/11/23
    • Re: [Amps] brass or BNP hardware, DJ7WW, 2010/11/23
    • Re: [Amps] brass or BNP hardware, Carl, 2010/11/23
    • Re: [Amps] brass or BNP hardware, DJ7WW, 2010/11/23
    • Re: [Amps] brass or BNP hardware, Roger (sub1), 2010/11/23

[Amps] Mc-Master Carr, Alf Pousar, 2010/11/19

• [Amps] Mc-Master Carr, Alf Pousar, 2010/11/19

Re: [Amps] Amps Digest, Vol 95, Issue 47, fsiyfr, 2010/11/19

• Re: [Amps] Amps Digest, Vol 95, Issue 47, n8de, 2010/11/19
  • Re: [Amps] Amps Digest, Vol 95, Issue 47, Carl, 2010/11/19

[Amps] source of '3rd harmonic', Dan Sawyer, 2010/11/18

• Message not available
  • Re: [Amps] source of '3rd harmonic', Dan Sawyer, 2010/11/19
    • Re: [Amps] source of '3rd harmonic', Shane Youhouse, 2010/11/20
    • Re: [Amps] source of '3rd harmonic', donroden, 2010/11/21
• Re: [Amps] source of '3rd harmonic', Ken Brown, 2010/11/20
• Re: [Amps] source of '3rd harmonic', TexasRF, 2010/11/19

[Amps] Plated screws, Stirling Schmidt, 2010/11/18

• Re: [Amps] Plated screws, n8de, 2010/11/18
  • Re: [Amps] Plated screws, Fuqua, Bill L, 2010/11/18
  • Re: [Amps] Plated screws, DJ7WW, 2010/11/19
    • Re: [Amps] Plated screws, Fuqua, Bill L, 2010/11/19
    • Re: [Amps] Plated screws, Vic K2VCO, 2010/11/19
• Re: [Amps] Plated screws, donroden, 2010/11/18
  • Re: [Amps] Plated screws, Carl, 2010/11/19
• Re: [Amps] Plated screws, Bill, W6WRT, 2010/11/19

[Amps] Matched Pairs of Tubes, kb5gt@cableone.net, 2010/11/18

• Re: [Amps] Matched Pairs of Tubes, Jim Barber, 2010/11/18
• Re: [Amps] Matched Pairs of Tubes, Carl, 2010/11/18
  • Re: [Amps] Matched Pairs of Tubes, Sam Carpenter, 2010/11/19
• Re: [Amps] Matched Pairs of Tubes, Randall, Randy, 2010/11/19
  • Re: [Amps] Matched Pairs of Tubes, Fortra, 2010/11/19
• Re: [Amps] Matched Pairs of Tubes, Sam Carpenter, 2010/11/19

[Amps] older 3k, MR.DEBONAIR, 2010/11/17

• Re: [Amps] older 3k, MIKE DURKIN, 2010/11/17
• [Amps] older 3k, Jim Thomson, 2010/11/17
  • Re: [Amps] older 3k, Dave M, 2010/11/17
• Re: [Amps] older 3k, John Becker, 2010/11/17

[Amps] Building a Mock Up, Lee Buller, 2010/11/17

• Re: [Amps] Building a Mock Up, gdaught6, 2010/11/17
  • Re: [Amps] Building a Mock Up, Radio WC6W, 2010/11/18
• Re: [Amps] Building a Mock Up, Edward Swynar, 2010/11/17
• Re: [Amps] Building a Mock Up, Vic K2VCO, 2010/11/17
• Re: [Amps] Building a Mock Up, Paul Kraemer, 2010/11/17
  • Re: [Amps] Building a Mock Up, Ian White GM3SEK, 2010/11/17
    • Re: [Amps] Building a Mock Up, Carl, 2010/11/18
• Re: [Amps] Building a Mock Up, Colin Lamb, 2010/11/17
  • Re: [Amps] Building a Mock Up, gdaught6, 2010/11/17
• Re: [Amps] Building a Mock Up, Dan Levin, 2010/11/17
• Re: [Amps] Building a Mock Up, TexasRF, 2010/11/18

[Amps] re compability of 3cx1200Z7 in lieu of 3cx1200D7eimac, Fern, 2010/11/17

• [Amps] re compability of 3cx1200Z7 in lieu of 3cx1200D7eimac, Jim Thomson, 2010/11/17

[Amps] Suggestions - I broke my amp - part 2, Larry, 2010/11/16

• Re: [Amps] Suggestions - I broke my amp - part 2, n8de, 2010/11/16
  • Re: [Amps] Suggestions - I broke my amp - part 2, Gary Schafer, 2010/11/16
    • Re: [Amps] Suggestions - I broke my amp - part 2, Larry, 2010/11/17
    • Re: [Amps] Suggestions - I broke my amp - part 2, Dave M, 2010/11/17
    • Re: [Amps] Suggestions - I broke my amp - part 2, Larry, 2010/11/17
    • Re: [Amps] Suggestions - I broke my amp - part 2, Larry, 2010/11/17
• Re: [Amps] Suggestions - I broke my amp - part 2, Vic K2VCO, 2010/11/16
  • Re: [Amps] Suggestions - I broke my amp - part 2, Larry, 2010/11/16

[Amps] Seeking advice on DC blocking caps for 6 m amp, John Farber, 2010/11/16

• Message not available
  • [Amps] Need advice on DCblockinig caps-My Text Body Didn't Come Through!, John Farber, 2010/11/16
    • Re: [Amps] Need advice on DCblockinig caps-My Text Body Didn't ComeThrough!, Carl, 2010/11/17

[Amps] 3CX1000A7 and larger, John Lyles, 2010/11/16

• Re: [Amps] 3CX1000A7 and larger, Steve Thompson, 2010/11/17

Re: [Amps] Sell or trade a 3CX1200Z7 tube, K3vw, 2010/11/16

• [Amps] Capacitor Values, Dave M, 2010/11/16

[Amps] 3CX1000A7, Jim Malone, 2010/11/15

• Re: [Amps] 3CX1000A7, Carl, 2010/11/15
• Re: [Amps] 3CX1000A7, Its from KE4VYN, 2010/11/16
  • Re: [Amps] 3CX1000A7, N7KA, 2010/11/16
    • Re: [Amps] 3CX1000A7, Its from KE4VYN, 2010/11/16
    • Re: [Amps] 3CX1000A7, Roger (sub1), 2010/11/16
    • Re: [Amps] 3CX1000A7, Carl, 2010/11/17
    • Re: [Amps] 3CX1000A7, Roger (sub1), 2010/11/17
    • Re: [Amps] 3CX1000A7, Carl, 2010/11/17
    • Re: [Amps] 3CX1000A7, Roger (sub1), 2010/11/19
    • Re: [Amps] 3CX1000A7, Carl, 2010/11/19
    • Re: [Amps] 3CX1000A7, Sam Carpenter, 2010/11/17
    • Re: [Amps] 3CX1000A7, Roger (sub1), 2010/11/19
  • Re: [Amps] 3CX1000A7, Carl, 2010/11/16
  • Re: [Amps] 3CX1000A7, Bill, W6WRT, 2010/11/16

[Amps] Attenuator needed, Vic K2VCO, 2010/11/15

• Re: [Amps] Attenuator needed, Jim Barber, 2010/11/15
  • Re: [Amps] Attenuator needed, Vic K2VCO, 2010/11/15
    • Re: [Amps] Attenuator needed, Larry Benko, 2010/11/15
    • Re: [Amps] Attenuator needed, Vic K2VCO, 2010/11/15
• Re: [Amps] Attenuator needed, Larry, 2010/11/15
  • Re: [Amps] Attenuator needed, Vic K2VCO, 2010/11/15
    • Re: [Amps] Attenuator needed, Larry, 2010/11/15
• Re: [Amps] Attenuator needed, Jim Brown, 2010/11/15
  • Re: [Amps] Attenuator needed, Vic K2VCO, 2010/11/15
  • Message not available
    • Re: [Amps] Attenuator needed, Jim Brown, 2010/11/16

[Amps] Simpson 270 series 5 VOM, Pete Raymond, 2010/11/15

• Re: [Amps] Simpson 270 series 5 VOM, TexasRF, 2010/11/15

[Amps] QRO is alive and well..in Greece, Jim Thomson, 2010/11/15

• Re: [Amps] QRO is alive and well..in Greece, Henk Remijn PA5KT, 2010/11/15
  • Re: [Amps] QRO is alive and well..in Greece, mikea, 2010/11/15
    • Re: [Amps] QRO is alive and well..in Greece, Roger (sub1), 2010/11/15
  • Re: [Amps] QRO is alive and well..in Greece, Jim Thomson, 2010/11/15
  • [Amps] QRO is alive and well..in Greece ( maybe elsewhere ), donroden, 2010/11/15
• Re: [Amps] QRO is alive and well..in Greece, Ron Youvan, 2010/11/15
• Re: [Amps] QRO is alive and well..in Greece, Shane Youhouse, 2010/11/15
• Re: [Amps] QRO is alive and well..in Greece, David Robbins, 2010/11/15
  • Re: [Amps] QRO is alive and well..in Greece, tzikas tzik, 2010/11/15

[Amps] Replacement of Collins bulbs in the 30S-1 amplifier (and other Collins), Joel Kornreich, 2010/11/14

• Re: [Amps] Replacement of Collins bulbs in the 30S-1 amplifier (and other Collins), Paul Christensen, 2010/11/14
• Re: [Amps] Replacement of Collins bulbs in the 30S-1 amplifier (and other Collins), Bill, W6WRT, 2010/11/14

[Amps] Toshiba tube 7f41R, Allan Greening, 2010/11/14

• Message not available
  • Re: [Amps] Toshiba tube 7f41R, Alek Petkovic, 2010/11/14
    • Message not available
    • Re: [Amps] Toshiba tube 7f41R, Alek Petkovic, 2010/11/14
• Re: [Amps] Toshiba tube 7f41R, Sam Carpenter, 2010/11/15
  • Re: [Amps] Toshiba tube 7f41R, Sam Carpenter, 2010/11/15
    • Re: [Amps] Toshiba tube 7f41R, Ron Youvan, 2010/11/15

[Amps] AL-82 Blowing fuses on startup, Gary McAdams, 2010/11/14

• Re: [Amps] AL-82 Blowing fuses on startup, Mitch Cox, 2010/11/14
  • Re: [Amps] AL-82 Blowing fuses on startup, Jim W7RY, 2010/11/14
    • Re: [Amps] AL-82 Blowing fuses on startup, Carl, 2010/11/14
    • Re: [Amps] AL-82 Blowing fuses on startup, Mitch Cox, 2010/11/14
    • Re: [Amps] AL-82 Blowing fuses on startup, Mitch Cox, 2010/11/14
  • Re: [Amps] AL-82 Blowing fuses on startup, Gary Smith, 2010/11/26
    • Re: [Amps] AL-82 Blowing fuses on startup, Robrk, 2010/11/26
    • Re: [Amps] AL-82 Blowing fuses on startup, Dave Cole, 2010/11/26
    • Re: [Amps] AL-82 Blowing fuses on startup, Dave Cole, 2010/11/26
    • Re: [Amps] AL-82 Blowing fuses on startup, Gary Smith, 2010/11/27
    • Re: [Amps] AL-82 Blowing fuses on startup, Jim W7RY, 2010/11/26
    • Re: [Amps] AL-82 Blowing fuses on startup, Carl, 2010/11/26
    • Re: [Amps] AL-82 Blowing fuses on startup, Mitch Cox, 2010/11/26
• Re: [Amps] AL-82 Blowing fuses on startup, Carl, 2010/11/14
  • Re: [Amps] AL-82 Blowing fuses on startup, Glen Zook, 2010/11/14
• Re: [Amps] AL-82 Blowing fuses on startup, Gudguyham, 2010/11/14
• Re: [Amps] AL-82 Blowing fuses on startup, Greg Chartrand, 2010/11/26
  • Re: [Amps] AL-82 Blowing fuses on startup, Gary McAdams, 2010/11/26
    • Re: [Amps] AL-82 Blowing fuses on startup, Paul Kraemer, 2010/11/27

[Amps] WTB RJ1A vacuum relay, Pete Raymond, 2010/11/13

• Re: [Amps] WTB RJ1A vacuum relay, Jim Brown, 2010/11/14
  • Re: [Amps] WTB RJ1A vacuum relay, Robert Dorchuck, 2010/11/14
  • Re: [Amps] WTB RJ1A vacuum relay, Rich Hallman - N7TR, 2010/11/14
  • Re: [Amps] WTB RJ1A vacuum relay, Jim W7RY, 2010/11/14
    • Re: [Amps] WTB RJ1A vacuum relay, Carl, 2010/11/14
    • Re: [Amps] WTB RJ1A vacuum relay, Jeff Blaine, 2010/11/14
  • Re: [Amps] WTB RJ1A vacuum relay, Han Higasa, 2010/11/14
• Re: [Amps] WTB RJ1A vacuum relay, Hector Garcia XE2K, 2010/11/14

[Amps] Cleanpig shack III, Hsu, 2010/11/13

• Message not available
  • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Re: [Amps] [ham_amplifiers] Cleanpig shack III, Hsu, 2010/11/13
• Message not available
  • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Message not available
    • Re: [Amps] [ham_amplifiers] Cleanpig shack III, Hsu, 2010/11/13

[Amps] GS35b, Allan Greening, 2010/11/12

• Re: [Amps] GS35b, Mel, 2010/11/13

[Amps] 2010 Handbook, kb5gt@cableone.net, 2010/11/12

• [Amps] 2010 Handbook, kb5gt@cableone.net, 2010/11/16
  • Re: [Amps] 2010 Handbook, Carl, 2010/11/16
    • Re: [Amps] 2010 Handbook, Andy GD0TEP, 2010/11/16
  • Re: [Amps] 2010 Handbook, Roger (sub1), 2010/11/16
    • Re: [Amps] 2010 Handbook, Hsu, 2010/11/16
    • Re: [Amps] 2010 Handbook, Bill, W6WRT, 2010/11/16
    • Re: [Amps] 2010 Handbook, Roger (sub1), 2010/11/17
    • Re: [Amps] 2010 Handbook, Hsu, 2010/11/17
    • Re: [Amps] 2010 Handbook, N1BUG, 2010/11/17
    • Re: [Amps] 2010 Handbook, Carl, 2010/11/17
    • Re: [Amps] 2010 Handbook, DJ7WW, 2010/11/17
    • Re: [Amps] 2010 Handbook, Roger (sub1), 2010/11/19
  • Re: [Amps] 2010 Handbook, Jim W7RY, 2010/11/16
• Re: [Amps] 2010 Handbook, TexasRF, 2010/11/17
  • Re: [Amps] 2010 Handbook, N1BUG, 2010/11/17
• Re: [Amps] 2010 Handbook, TexasRF, 2010/11/17
  • Re: [Amps] 2010 Handbook, Carl, 2010/11/17
  • Re: [Amps] 2010 Handbook, N1BUG, 2010/11/17

[Amps] Blower source, Dave M, 2010/11/12

• Re: [Amps] Blower source, Jim W7RY, 2010/11/12
  • Re: [Amps] Blower source, Bill, W6WRT, 2010/11/12
    • Re: [Amps] Blower source, Dave M, 2010/11/12
    • Re: [Amps] Blower source, Vic K2VCO, 2010/11/12
    • Re: [Amps] Blower source, Hsu, 2010/11/12
    • [Amps] EBM-Papst speed control (WAS: Blower source), Jim Barber, 2010/11/12
    • Re: [Amps] EBM-Papst speed control (WAS: Blower source), Bill, W6WRT, 2010/11/12
• Re: [Amps] Blower source, Jim Barber, 2010/11/12
• [Amps] Blower Source, Roland AH6RR, 2010/11/12
  • Re: [Amps] Blower Source, Carl, 2010/11/13
• Re: [Amps] Blower Source, TexasRF, 2010/11/13
  • Re: [Amps] Blower Source, Roger (sub1), 2010/11/13
    • Re: [Amps] Blower Source, Mitch Cox, 2010/11/14
• Re: [Amps] Blower Source, TexasRF, 2010/11/14
  • Re: [Amps] Blower Source, Dave M, 2010/11/14
    • Re: [Amps] Blower Source, Larry, 2010/11/14
    • Re: [Amps] Blower Source, Jim W7RY, 2010/11/14
  • Re: [Amps] Blower Source, Roger (sub1), 2010/11/14
• [Amps] Blower Source, Jim Thomson, 2010/11/14

[Amps] 2010 ARRL Handbook, kb5gt@cableone.net, 2010/11/12

• Re: [Amps] 2010 ARRL Handbook, Alek Petkovic, 2010/11/12
• Re: [Amps] 2010 ARRL Handbook, Dave M, 2010/11/12
• Re: [Amps] 2010 ARRL Handbook, Tim Duffy K3LR, 2010/11/12
• Re: [Amps] 2010 ARRL Handbook, Jim W7RY, 2010/11/12
  • Re: [Amps] 2010 ARRL Handbook, Hsu, 2010/11/12
    • Re: [Amps] 2010 ARRL Handbook, Roger (sub1), 2010/11/12
    • Re: [Amps] 2010 ARRL Handbook, Carl, 2010/11/12
    • Re: [Amps] 2010 ARRL Handbook, Roger (sub1), 2010/11/12
  • Re: [Amps] 2010 ARRL Handbook, Jim Barber, 2010/11/12
• [Amps] 2010 ARRL Handbook, Jim Thomson, 2010/11/12

Re: [Amps] time to death..., Roy, 2010/11/11

• Re: [Amps] time to death..., Jeff Blaine, 2010/11/11
• Re: [Amps] time to death..., Ian White GM3SEK, 2010/11/11
• Re: [Amps] time to death..., Andy GD0TEP, 2010/11/11
• Re: [Amps] time to death..., Colin Lamb, 2010/11/11
  • Re: [Amps] time to death..., Roger (K8RI), 2010/11/11
    • Re: [Amps] time to death..., Jeff Blaine, 2010/11/11
    • Re: [Amps] time to death..., donroden, 2010/11/11
  • Re: [Amps] time to death..., Bill, W6WRT, 2010/11/11
    • Re: [Amps] time to death..., donroden, 2010/11/11
    • Re: [Amps] time to death..., Bill, W6WRT, 2010/11/11
    • Re: [Amps] time to death..., k7fm, 2010/11/11
    • Re: [Amps] time to death..., donroden, 2010/11/12
    • Re: [Amps] time to death..., Bill, W6WRT, 2010/11/12
    • Re: [Amps] time to death..., Ron Youvan, 2010/11/12
• [Amps] time to death..., Jim Thomson, 2010/11/12

[Amps] RF Spike w/in SSB, WA3GIN, 2010/11/10

• Re: [Amps] RF Spike w/in SSB, Steve Katz, 2010/11/10

[Amps] Alpha 70/77 Series Replacement Meter Scales, Paul Christensen, 2010/11/10

• Re: [Amps] Alpha 70/77 Series Replacement Meter Scales, Carl, 2010/11/10
  • Re: [Amps] Alpha 70/77 Series Replacement Meter Scales, Paul Christensen, 2010/11/10

[Amps] (no subject), Chris Wright, 2010/11/10

• [Amps] (no subject), K8LEEWMM, 2010/11/18

[Amps] Those Amps. Those Videos, Alek Petkovic, 2010/11/09

• Re: [Amps] Those Amps. Those Videos, Carl, 2010/11/10

Re: [Amps] (Amps) our amplifier in 2010 CQWW, Robert Briggs, 2010/11/09

• Re: [Amps] (Amps) our amplifier in 2010 CQWW, Jim W7RY, 2010/11/09

[Amps] 850 and 852, Lee Buller, 2010/11/09

• Re: [Amps] 850 and 852, Carl, 2010/11/09
  • Re: [Amps] 850 and 852, JTB ô¿ô, 2010/11/14

Re: [Amps] our amplifier in 2010 CQWW, s-roabr@online.no, 2010/11/09

• Re: [Amps] our amplifier in 2010 CQWW, DF3KV, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, Jeff Blaine, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Michael Tope, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, donroden, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Steve Katz, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Phil Clements, 2010/11/09

[Amps] our amplifier in 2010 CQWW, Hsu, 2010/11/08

• Re: [Amps] our amplifier in 2010 CQWW, Larry K4AB, 2010/11/08
  • Re: [Amps] our amplifier in 2010 CQWW, Doug Renwick, 2010/11/08
  • Re: [Amps] our amplifier in 2010 CQWW, Jim W7RY, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Tim Duffy K3LR, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Jim W7RY, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Jim Brown, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/10
    • Re: [Amps] our amplifier in 2010 CQWW, WA3GIN, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Hardy Landskov, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Ken Brown, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Jim W7RY, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Hsu, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Ken Brown, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Jim W7RY, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Hsu, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, DAVE WHITE, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Roger (sub1), 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Alek Petkovic, 2010/11/08
    • Re: [Amps] our amplifier in 2010 CQWW, Jim W7RY, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Alek Petkovic, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Rob Stampfli, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Vic K2VCO, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, donroden, 2010/11/09
• Re: [Amps] our amplifier in 2010 CQWW, Dave White, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, donroden, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Gary Smith, 2010/11/10
• [Amps] our amplifier in 2010 CQWW, Jim Thomson, 2010/11/09
• [Amps] our amplifier in 2010 CQWW, Jim Thomson, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, Jim W7RY, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Doug Renwick, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Jim Brown, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Sam Carpenter, 2010/11/10
• Re: [Amps] our amplifier in 2010 CQWW, Dave White, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, Sam Carpenter, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, DF3KV, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Sam Carpenter, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Henk Remijn PA5KT, 2010/11/09
• Re: [Amps] our amplifier in 2010 CQWW, David Robbins, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, David Cutter, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, David Cutter, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Sam Carpenter, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, David Cutter, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Sam Carpenter, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Roger (sub1), 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Ken Brown, 2010/11/09
• Re: [Amps] our amplifier in 2010 CQWW, Paul Decker, 2010/11/09
• [Amps] our amplifier in 2010 CQWW, JOHN POWELL, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, Dave M, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Steve Katz, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Dave M, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Dave M, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Roger (sub1), 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Mike, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Carl, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, Jeff Blaine, 2010/11/09
    • Re: [Amps] our amplifier in 2010 CQWW, donroden, 2010/11/10
• Re: [Amps] our amplifier in 2010 CQWW, Paul Decker, 2010/11/09
• [Amps] our amplifier in 2010 CQWW, Jim Thomson, 2010/11/09
• [Amps] our amplifier in 2010 CQWW, Jim Thomson, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, Jim Barber, 2010/11/09
  • Re: [Amps] our amplifier in 2010 CQWW, Doug Renwick, 2010/11/10
    • Re: [Amps] our amplifier in 2010 CQWW, Jim Brown, 2010/11/10
    • Re: [Amps] our amplifier in 2010 CQWW, Joe Barnes, 2010/11/10
    • Re: [Amps] our amplifier in 2010 CQWW, BJ VOUTE, 2010/11/10
    • Re: [Amps] our amplifier in 2010 CQWW, Hsu, 2010/11/11
• Re: [Amps] our amplifier in 2010 CQWW, Mike Saculla, 2010/11/10

Re: [Amps] ALC control with Yaesu FT- 897D and Ameritron ALS-600, Jim Garland, 2010/11/08

• Re: [Amps] ALC control with Yaesu FT- 897D and Ameritron ALS-600, Dick, 2010/11/08

[Amps] time to death in the event of a blower failure, Jeff Blaine, 2010/11/07

• Re: [Amps] time to death in the event of a blower failure, Bill, W6WRT, 2010/11/07
• Re: [Amps] time to death in the event of a blower failure, k7fm, 2010/11/08
  • Re: [Amps] time to death in the event of a blower failure, Jeff Blaine, 2010/11/08
• Re: [Amps] time to death in the event of a blower failure, Paul Christensen, 2010/11/08
  • Re: [Amps] time to death in the event of a blower failure, Jeff Blaine, 2010/11/08
• Re: [Amps] time to death in the event of a blower failure, Gary Smith, 2010/11/08
  • Re: [Amps] time to death in the event of a blower failure, Jeff Blaine, 2010/11/08
    • Re: [Amps] time to death in the event of a blower failure, Carl, 2010/11/08
• Re: [Amps] time to death in the event of a blower failure, TexasRF, 2010/11/08
  • [Amps] smoke or cherry red, Charles Harpole, 2010/11/08
    • Re: [Amps] smoke or cherry red, Bill, W6WRT, 2010/11/08
  • Re: [Amps] time to death in the event of a blower failure, Carl, 2010/11/08
• Re: [Amps] time to death in the event of a blower failure, Adrian, 2010/11/08
  • Re: [Amps] time to death in the event of a blower failure, Bill, W6WRT, 2010/11/08
• Re: [Amps] time to death in the event of a blower failure, Colin Lamb, 2010/11/08

[Amps] filter caps, mikflathead, 2010/11/07

• Re: [Amps] filter caps, Carl, 2010/11/07

Re: [Amps] Ameritron AL-572, pfizenmayer, 2010/11/06

• Re: [Amps] Ameritron AL-572, Carl, 2010/11/06
  • [Amps] AMP Supply LK-450, Mike, 2010/11/06
• Re: [Amps] Ameritron AL-572, Hal W5GHZ, 2010/11/07

[Amps] My conclusion: Re: Low SWR Input Amps, w3hvq, 2010/11/03

• Re: [Amps] My conclusion: Re: Low SWR Input Amps, Jim W7RY, 2010/11/03

[Amps] Low Input SWR Amps Networks, w3hvq, 2010/11/03

• Re: [Amps] Low Input SWR Amps Networks, Bill, W6WRT, 2010/11/03
  • Re: [Amps] Low Input SWR Amps Networks, donroden, 2010/11/03
    • Re: [Amps] Low Input SWR Amps Networks, Roger D Johnson, 2010/11/03
    • Re: [Amps] Low Input SWR Amps Networks, Bill, W6WRT, 2010/11/03
• Re: [Amps] Low Input SWR Amps Networks, Roger (K8RI), 2010/11/03

[Amps] al1200 tuning slugs?, knormoyle@surfnetusa.com, 2010/11/03

• Re: [Amps] al1200 tuning slugs?, Tony Brock-Fisher, 2010/11/03

[Amps] Gettering the GU-74B, Peter Junker, 2010/11/01

• Re: [Amps] Gettering the GU-74B, Kees - pa7two, 2010/11/02

[Amps] Looking for design for 25-50W linear amplifier covering 50 MHz band, David Feldman, 2010/11/01

• Re: [Amps] Looking for design for 25-50W linear amplifier covering 50MHz band, Hardy Landskov, 2010/11/01

Re: [Amps] HV rectifier strings - to bypass or not?, Jim Barber, 2010/11/01

• Re: [Amps] HV rectifier strings - to bypass or not?, Carl, 2010/11/01
  • Re: [Amps] HV rectifier strings - to bypass or not?, Jim W7RY, 2010/11/02
• Re: [Amps] HV rectifier strings - to bypass or not?, Shane Youhouse, 2010/11/02

[Amps] Cathode input circuit, Mike Lord, 2010/11/01

• Re: [Amps] Cathode input circuit, Dave M, 2010/11/01
• Re: [Amps] Cathode input circuit, Carl, 2010/11/01
• Re: [Amps] Cathode input circuit, Ron Youvan, 2010/11/01