----- Original Message -----
From: "Gary Schafer" <garyschafer@comcast.net>
To: "'Rob Atkinson'" <ranchorobbo@gmail.com>; <amps@contesting.com>
Sent: Wednesday, July 20, 2011 12:01 PM
Subject: Re: [Amps] Supply question
> With 3500 volts @ 890 watts PEP out per tube 3rd order IM products are -40
> db with respect to one of two tones. That's -46 db the way radio
> manufacturers spec IM. Pretty darn good!
> At 2500 volts 3rd order IM is -33db. Per Eimac spec sheet. Much better
> than
> most radios today.
>
> 73
> Gary K4FMX
Thats at zero bias. Add 5.1V as in the SB-220 and its in the low -40's which
is what you will actually hear on the air and not equipment manufacturers
fudged figures.
Carl
KM1H
>
>> -----Original Message-----
>> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
>> On Behalf Of Rob Atkinson
>> Sent: Wednesday, July 20, 2011 11:16 AM
>> To: amps@contesting.com
>> Subject: Re: [Amps] Supply question
>>
>> I understand that with 3-500 the 3rd order IMD gets pretty lousy when
>> the Ep gets up there much above 3 KV.
>>
>> I also had some idea you get a much bigger chance of arcs in the tube
>> if you push the Ep way up there near the limit.
>>
>> comments?
>>
>> 73
>>
>> Rob
>> K5UJ
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1390 / Virus Database: 1518/3776 - Release Date: 07/20/11
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|