[Amps] FRONTIER ELECTRONICS LA-2 144 Mhz LINEAR AMPLIFIER Still Looking, Iain, 2011/07/31

• Re: [Amps] FRONTIER ELECTRONICS LA-2 144 Mhz LINEAR AMPLIFIER Still Looking, Anthony R . Gold, 2011/07/31

[Amps] FS: Parts that may be of some use in Amplifiers, Radio WC6W, 2011/07/30

• [Amps] Tech Books Online, Ken, 2011/07/30

[Amps] FW: 4cx5000J for $75 NOS-correction, Fuqua, Bill L, 2011/07/24

• Re: [Amps] FW: 4cx5000J for $75 NOS-correction, Fuqua, Bill L, 2011/07/24
  • Re: [Amps] FW: 4cx5000J for $75 NOS-correction, David C. Hallam, 2011/07/24
    • Re: [Amps] FW: 4cx5000J for $75 NOS-correction, Roger (sub1), 2011/07/24
  • Re: [Amps] FW: 4cx5000J for $75 NOS-correction, Roger (sub1), 2011/07/24

[Amps] ALPHA 87A Reset Command String..., David Jordan, 2011/07/24

• Re: [Amps] ALPHA 87A Reset Command String..., David Jordan, 2011/07/24

[Amps] 4cx5000J for $75 NOS, Fuqua, Bill L, 2011/07/24

• Re: [Amps] 4cx5000J for $75 NOS, Felipe Ceglia, 2011/07/24
  • Re: [Amps] 4cx5000J for $75 NOS, mikea, 2011/07/24
• Re: [Amps] 4cx5000J for $75 NOS, Radio WC6W, 2011/07/24
  • Message not available
    • Re: [Amps] 4cx5000J for $75 NOS, Chris Pedder, 2011/07/24
• Re: [Amps] 4cx5000J for $75 NOS, Jim Tonne, 2011/07/24
  • Re: [Amps] 4cx5000J for $75 NOS, Fuqua, Bill L, 2011/07/24
• [Amps] 4cx5000J for $75 NOS, Donald Fox, 2011/07/24

[Amps] Some PS questions, Vic K2VCO, 2011/07/22

• Re: [Amps] Some PS questions, Glen Zook, 2011/07/22

[Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Mike Tubby, 2011/07/22

• Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Phil Clements, 2011/07/22
  • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Pete Smith, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", MIKE DURKIN, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Randall, Randy, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Al Kozakiewicz, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", John D'Ausilio, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Bert Almemo, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Ron Youvan, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", W2XJ, 2011/07/22
• Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", jim feldman, 2011/07/22
• Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Manfred Mornhinweg, 2011/07/22
• [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Baruch Zilbershatz, 2011/07/22
  • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Phil Clements, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Roger (sub1), 2011/07/23
• Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Paul Decker, 2011/07/22
  • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Al Kozakiewicz, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Paul Decker, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Al Kozakiewicz, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Al Kozakiewicz, 2011/07/22
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Carl Clawson, 2011/07/22
  • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Roger (sub1), 2011/07/22
• Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Baruch Zilbershatz, 2011/07/22
  • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Mike Tubby, 2011/07/23
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", jeff millar, 2011/07/23
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Dan Mills, 2011/07/23
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Gary K9GS, 2011/07/23
    • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", jeff millar, 2011/07/23
• [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Baruch Zilbershatz, 2011/07/23
• Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Manfred Mornhinweg, 2011/07/23
  • Re: [Amps] New NXP BLF578XR 1200W LDMOS FET is "indestructible", Roger (sub1), 2011/07/23

[Amps] Need -- 300 ohm 50w noninductive resistor, Vic K2VCO, 2011/07/19

• Re: [Amps] Need -- 300 ohm 50w noninductive resistor, Glen Zook, 2011/07/20
  • Re: [Amps] Need -- 300 ohm 50w noninductive resistor, Vic K2VCO, 2011/07/20
    • Re: [Amps] Need -- 300 ohm 50w noninductive resistor, Col. Paul E. Cater, 2011/07/20
    • Re: [Amps] Need -- 300 ohm 50w noninductive resistor, Glen Zook, 2011/07/20
    • Re: [Amps] Need -- 300 ohm 50w noninductive resistor, Carl, 2011/07/21
• Re: [Amps] Need -- 300 ohm 50w noninductive resistor, Bryan Swadener, 2011/07/21

[Amps] Supply question, Michael J Talkington, 2011/07/19

• Re: [Amps] Supply question, Carl, 2011/07/19
  • Re: [Amps] Supply question, Roger (sub1), 2011/07/20
    • Re: [Amps] Supply question, Carl, 2011/07/20
• Re: [Amps] Supply question, Gary Schafer, 2011/07/19
• Re: [Amps] Supply question, Dr. David Kirkby, 2011/07/20
• Re: [Amps] Supply question, Réjean Léveillé, 2011/07/20
• Re: [Amps] Supply question, Rob Atkinson, 2011/07/20
  • Re: [Amps] Supply question, Sam Carpenter, 2011/07/20
    • Re: [Amps] Supply question, kingwood, 2011/07/20
    • Re: [Amps] Supply question, Jim Barber, 2011/07/20
    • Re: [Amps] Supply question, Ian White GM3SEK, 2011/07/20
    • Re: [Amps] Supply question, Carl, 2011/07/20
    • Re: [Amps] Supply question, Sam Carpenter, 2011/07/20
  • Re: [Amps] Supply question, Sam Carpenter, 2011/07/20
    • Re: [Amps] Supply question, Carl, 2011/07/20
  • Re: [Amps] Supply question, Gary Schafer, 2011/07/20
    • Re: [Amps] Supply question, Carl, 2011/07/20
    • Re: [Amps] Supply question, Rob Atkinson, 2011/07/20
    • Re: [Amps] Supply question, Carl, 2011/07/21
    • Re: [Amps] Supply question, Rob Atkinson, 2011/07/21

[Amps] MOSFET ratings, Manfred Mornhinweg, 2011/07/17

• Re: [Amps] MOSFET ratings, Steve Thompson, 2011/07/17
• Re: [Amps] MOSFET ratings, Manfred Mornhinweg, 2011/07/18
  • Re: [Amps] MOSFET ratings, Ron Youvan, 2011/07/18
• Re: [Amps] MOSFET ratings, Steve Thompson, 2011/07/18
• Re: [Amps] MOSFET ratings, Manfred Mornhinweg, 2011/07/19

[Amps] Hunter 2000c Low Output., Charles Hedrick, 2011/07/16

• Re: [Amps] Hunter 2000c Low Output., Mitch Cox, 2011/07/16
  • Re: [Amps] Hunter 2000c Low Output., Carl, 2011/07/17
  • Re: [Amps] Hunter 2000c Low Output., Tim Kass, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Carl, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Mitch Cox, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Carl, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Mitch Cox, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Carl, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Mitch Cox, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Doug Renwick, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Carl, 2011/07/18
    • Re: [Amps] Hunter 2000c Low Output., Mitch Cox, 2011/07/17
    • Re: [Amps] Hunter 2000c Low Output., Tim Kass, 2011/07/17

[Amps] 4-1000, Rex Lint, 2011/07/16

• Re: [Amps] 4-1000, Alek Petkovic, 2011/07/16
  • Re: [Amps] 4-1000, Carl, 2011/07/16
    • Re: [Amps] 4-1000, DAVE WHITE, 2011/07/17
    • Re: [Amps] 4-1000, Carl, 2011/07/17
    • Re: [Amps] 4-1000, DF3KV, 2011/07/17

[Amps] Value, part 3 (final), n2kw@juno.com, 2011/07/16

• Re: [Amps] Value, part 3 (final), Carl, 2011/07/16
  • Re: [Amps] Value, part 3 (final), Dave M, 2011/07/16
    • Re: [Amps] Value, part 3 (final), Sam Carpenter, 2011/07/18
• Re: [Amps] Value, part 3 (final), DAVE WHITE, 2011/07/16
• Re: [Amps] Value, part 3 (final), Vic K2VCO, 2011/07/16
• [Amps] Value, part 3 (final), John Lyles, 2011/07/16

[Amps] YC or YU179, Donald Fox, 2011/07/14

• Re: [Amps] YC or YU179, Carl, 2011/07/15
• Re: [Amps] YC or YU179, Dave White, 2011/07/15
  • Re: [Amps] YC or YU179, mikea, 2011/07/15
    • Re: [Amps] YC or YU179, Fuqua, Bill L, 2011/07/15

[Amps] 3cx800/3cpx800 source, Donald Fox, 2011/07/14

• [Amps] 3cx800/3cpx800 source, Donald Fox, 2011/07/15

[Amps] YU-158, ED MCKIE, 2011/07/14

• [Amps] Ameritron AL572, Doyle, 2011/07/14
  • [Amps] NOS 3CX400U7, Bob Arenella, 2011/07/14
• Re: [Amps] YU-158, Mike McCarthy, W1NR, 2011/07/14
  • Re: [Amps] YU-158, ED MCKIE, 2011/07/14

[Amps] Value? (PART TWO), n2kw@juno.com, 2011/07/14

• Re: [Amps] Value? (PART TWO), Carl, 2011/07/14
  • Re: [Amps] Value? (PART TWO), Jeff Blaine, 2011/07/14
• Re: [Amps] Value? (PART TWO), Jim W7RY, 2011/07/14
• Re: [Amps] Value? (PART TWO), DAVE WHITE, 2011/07/15
  • Re: [Amps] Value? (PART TWO), Dr. David Kirkby, 2011/07/15
  • Re: [Amps] Value? (PART TWO), Carl, 2011/07/15
• Re: [Amps] Value? (PART TWO), Colin Lamb, 2011/07/14
• Re: [Amps] Value? (PART TWO), Commander John, 2011/07/15

[Amps] YU-158 still being made?, ED MCKIE, 2011/07/13

• Re: [Amps] YU-158 still being made?, Dr. David Kirkby, 2011/07/13
  • Re: [Amps] YU-158 still being made?, Roger (sub1), 2011/07/13
    • Re: [Amps] YU-158 still being made?, Dr. David Kirkby, 2011/07/14
    • Re: [Amps] YU-158 still being made?, Jim W7RY, 2011/07/14
    • Re: [Amps] YU-158 still being made?, Pete Smith, 2011/07/15
• Re: [Amps] YU-158 still being made?, Carl, 2011/07/13

[Amps] Value?, n2kw@juno.com, 2011/07/13

• Re: [Amps] Value?, Carl, 2011/07/13

[Amps] Who sells 3CPX-800A7's besides RF parts ??, Jim Thomson, 2011/07/13

• Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Dr. David Kirkby, 2011/07/13
  • Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Carl, 2011/07/13
• Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Gary Smith, 2011/07/13
  • Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, jerryjtb, 2011/07/13
    • Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, AB2E Darrell, 2011/07/13
    • Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Dr. David Kirkby, 2011/07/13
    • Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Carl, 2011/07/13
    • Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Dana Rees, 2011/07/14
    • Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Carl, 2011/07/14
• Re: [Amps] Who sells 3CPX-800A7's besides RF parts ??, Carl, 2011/07/13
• [Amps] Who sells 3CPX-800A7's besides RF parts ??, Jim Thomson, 2011/07/13

[Amps] Auto tune amplifier, Hsu, 2011/07/12

• Re: [Amps] Auto tune amplifier, Mike, 2011/07/12

Re: [Amps] GS35b FWB issue, Steve Thompson, 2011/07/11

• Re: [Amps] GS35b FWB issue, Alek Petkovic, 2011/07/11
• Re: [Amps] GS35b FWB issue, Steve Thompson, 2011/07/11
• Re: [Amps] GS35b FWB issue, Steve, 2011/07/13
• Re: [Amps] GS35b FWB issue, Steve, 2011/07/13
  • Re: [Amps] GS35b FWB issue, Bill Fuqua, 2011/07/13
    • Re: [Amps] GS35b FWB issue, David H Craig, 2011/07/13
    • Re: [Amps] GS35b FWB issue, Bill Fuqua, 2011/07/13
• Re: [Amps] GS35b FWB issue, Steve, 2011/07/14

[Amps] Anyone recall this Dayton Hamvention surplus parts vendor name, Jeff Blaine, 2011/07/11

• Re: [Amps] Anyone recall this Dayton Hamvention surplus parts vendor name, Don Moman VE6JY, 2011/07/11
  • Re: [Amps] Anyone recall this Dayton Hamvention surplus partsvendor name, Jeff Blaine, 2011/07/11

Re: [Amps] GS35b FWB issue], Steve Thompson, 2011/07/11

• Re: [Amps] GS35b FWB issue], Ron Youvan, 2011/07/11

[Amps] GS35b FWB issue, David H Craig, 2011/07/10

• Re: [Amps] GS35b FWB issue, Ian White GM3SEK, 2011/07/10
  • Re: [Amps] GS35b FWB issue, David H Craig, 2011/07/11
  • Re: [Amps] GS35b FWB issue, Carl, 2011/07/11
    • Re: [Amps] GS35b FWB issue, David H Craig, 2011/07/11
    • Re: [Amps] GS35b FWB issue, Carl, 2011/07/11
    • Re: [Amps] GS35b FWB issue, David H Craig, 2011/07/11
    • Re: [Amps] GS35b FWB issue, Jeff Goldman, 2011/07/11
    • Re: [Amps] GS35b FWB issue, Ian White GM3SEK, 2011/07/11
• Re: [Amps] GS35b FWB issue, Mike Tubby, 2011/07/11
• Re: [Amps] GS35b FWB issue, Han Higasa, 2011/07/12
  • Re: [Amps] GS35b FWB issue, Ian White GM3SEK, 2011/07/12
• Re: [Amps] GS35b FWB issue, TexasRF, 2011/07/11
• Re: [Amps] GS35b FWB issue, Randy S., 2011/07/11
  • Re: [Amps] GS35b FWB issue, Fuqua, Bill L, 2011/07/11
• [Amps] GS35b FWB issue, Jim Thomson, 2011/07/12
• [Amps] GS35b FWB issue, Jim Thomson, 2011/07/13
  • Re: [Amps] GS35b FWB issue, David H Craig, 2011/07/13

[Amps] 4-1000 GG project, HOWARDLYON, 2011/07/10

• Re: [Amps] 4-1000 GG project, Bob Sullivan, 2011/07/10
• Re: [Amps] 4-1000 GG project, Carl, 2011/07/10
  • Re: [Amps] 4-1000 GG project, Dave Hachadorian, 2011/07/10
    • Re: [Amps] 4-1000 GG project, Carl, 2011/07/10

[Amps] DTR 2000L cap needed, w7mem@juno.com, 2011/07/09

• Re: [Amps] DTR 2000L cap needed, Dr. David Kirkby, 2011/07/10
  • Re: [Amps] DTR 2000L cap needed, Carl, 2011/07/10

[Amps] AC filament voltage regulator, Hsu, 2011/07/09

• Re: [Amps] AC filament voltage regulator, Dr. David Kirkby, 2011/07/09
  • Re: [Amps] AC filament voltage regulator, John G3UUT, 2011/07/10
    • Re: [Amps] AC filament voltage regulator, Hsu, 2011/07/10
    • Re: [Amps] AC filament voltage regulator, Ron Youvan, 2011/07/14
    • Re: [Amps] AC filament voltage regulator, Bill Fuqua, 2011/07/14
• Re: [Amps] AC filament voltage regulator, TexasRF, 2011/07/10
  • Re: [Amps] AC filament voltage regulator, John G3UUT, 2011/07/10
• Re: [Amps] AC filament voltage regulator, TexasRF, 2011/07/14
  • Re: [Amps] AC filament voltage regulator, Fuqua, Bill L, 2011/07/14

[Amps] What's wrong here- dropping resistor for DC meter?, Ed Heimbach, 2011/07/09

• Re: [Amps] What's wrong here- dropping resistor for DC meter?, Ron Youvan, 2011/07/09
• Re: [Amps] What's wrong here- dropping resistor for DC meter?, Fuqua, Bill L, 2011/07/09
• Re: [Amps] What's wrong here- dropping resistor for DC meter?, Dr. David Kirkby, 2011/07/09
• Re: [Amps] What's wrong here- dropping resistor for DC meter?, k7fm, 2011/07/09
  • Re: [Amps] What's wrong here- dropping resistor for DC meter?, Dr. David Kirkby, 2011/07/09
    • Re: [Amps] What's wrong here- dropping resistor for DC meter?, Jim Tonne, 2011/07/09
• Re: [Amps] What's wrong here- dropping resistor for DC meter?, Robert Groh, 2011/07/09
• Re: [Amps] What's wrong here- dropping resistor for DC meter?, Dr. David Kirkby, 2011/07/09

[Amps] Need 35R and 50R 0.25" semi-flexible coax, Mike Tubby, 2011/07/08

• Re: [Amps] Need 35R and 50R 0.25" semi-flexible coax, Henk PA5KT, 2011/07/08
  • Re: [Amps] Need 35R and 50R 0.25" semi-flexible coax, Mike Tubby, 2011/07/08
    • Re: [Amps] Need 35R and 50R 0.25" semi-flexible coax, Karl-Arne Markström, 2011/07/08
• Re: [Amps] Need 35R and 50R 0.25" semi-flexible coax, Bryan Swadener, 2011/07/08

[Amps] GG tuned input with autotuner, Randy S., 2011/07/07

• Re: [Amps] GG tuned input with autotuner, Steve, 2011/07/07

[Amps] RAL color for Marconi AMP, Martin A Flynn, 2011/07/04

• Re: [Amps] RAL color for Marconi AMP, Ron Youvan, 2011/07/04
• Re: [Amps] RAL color for Marconi AMP, Glen Zook, 2011/07/05
  • Re: [Amps] RAL color for Marconi AMP, Glen Zook, 2011/07/18

[Amps] transformer, Coalman, 2011/07/04

• Re: [Amps] transformer, Mike Lucas, 2011/07/04
• Re: [Amps] transformer, Roger (sub1), 2011/07/04
• Re: [Amps] transformer, Jim W7RY, 2011/07/05
  • Re: [Amps] transformer, Roger (sub1), 2011/07/05
• Re: [Amps] transformer, Dave White, 2011/07/05
  • Re: [Amps] transformer, Mike Tubby, 2011/07/06

[Amps] You must see this tube on eBay, Dr. David Kirkby, 2011/07/04

• Re: [Amps] You must see this tube on eBay, mikea, 2011/07/04
  • Re: [Amps] You must see this tube on eBay, Jim Tonne, 2011/07/04

Re: [Amps] High SWR, Dr. David Kirkby, 2011/07/04

• Re: [Amps] High SWR, Fuqua, Bill L, 2011/07/04
  • Re: [Amps] High SWR, Dr. David Kirkby, 2011/07/04
    • Re: [Amps] High SWR, Fuqua, Bill L, 2011/07/04
    • Re: [Amps] High SWR, Fuqua, Bill L, 2011/07/04
    • Re: [Amps] High SWR, David Kirkby, 2011/07/05
• Re: [Amps] High SWR, Roger (sub1), 2011/07/04
• Re: [Amps] High SWR, Paul Decker, 2011/07/05

[Amps] High Voltage Engineering, John Lyles, 2011/07/04

• Re: [Amps] High Voltage Engineering, Carl, 2011/07/04

[Amps] ACVFD, AB5MM, 2011/07/04

• [Amps] EIMAC SK-516, Bob Arenella, 2011/07/04
• Re: [Amps] ACVFD, donroden, 2011/07/04

[Amps] Need T/R Relay for Henry 2KD-2, ED MCKIE, 2011/07/03

• Re: [Amps] Need T/R Relay for Henry 2KD-2, Mitch Cox, 2011/07/03

[Amps] Risks from continuous discharge of high voltage ??, Dr. David Kirkby, 2011/07/03

• Re: [Amps] Risks from continuous discharge of high voltage ??, Ron Youvan, 2011/07/03
  • Re: [Amps] Risks from continuous discharge of high voltage ??, Fuqua, Bill L, 2011/07/03
    • Re: [Amps] Risks from continuous discharge of high voltage ??, Fuqua, Bill L, 2011/07/03
    • Re: [Amps] Risks from continuous discharge of high voltage ??, Roger (sub1), 2011/07/03
  • Re: [Amps] Risks from continuous discharge of high voltage ??, Roger (sub1), 2011/07/03
• Re: [Amps] Risks from continuous discharge of high voltage ??, Fuqua, Bill L, 2011/07/03
  • Re: [Amps] Risks from continuous discharge of high voltage ??, Fuqua, Bill L, 2011/07/03
  • Re: [Amps] Risks from continuous discharge of high voltage ??, Dave Hachadorian, 2011/07/03
• Re: [Amps] Risks from continuous discharge of high voltage ??, Manfred Mornhinweg, 2011/07/03
• Re: [Amps] Risks from continuous discharge of high voltage ??, Mike Waters, 2011/07/03
• [Amps] Risks from continuous discharge of high voltage ??, Paul Decker, 2011/07/03
  • Re: [Amps] Risks from continuous discharge of high voltage ??, Roger, 2011/07/07
• [Amps] Risks from continuous discharge of high voltage ??, Jim Thomson, 2011/07/03
  • Re: [Amps] Risks from continuous discharge of high voltage ??, Carl, 2011/07/03
  • Re: [Amps] Risks from continuous discharge of high voltage ??, Fuqua, Bill L, 2011/07/03

[Amps] Filament Suppy, Info for G8WRB, Alek Petkovic, 2011/07/02

• Re: [Amps] Filament Suppy, Info for G8WRB, Dr. David Kirkby, 2011/07/02
  • Re: [Amps] Filament Suppy, Info for G8WRB, Radio WC6W, 2011/07/03

[Amps] What is the meaning of ACVFD ?, pdussertvidalet, 2011/07/01

• Re: [Amps] What is the meaning of ACVFD ?, Paul Kraemer, 2011/07/02
  • Re: [Amps] What is the meaning of ACVFD ?, Roger (sub1), 2011/07/02
    • Re: [Amps] What is the meaning of ACVFD ?, Carl, 2011/07/02
    • Re: [Amps] What is the meaning of ACVFD ?, Roger (sub1), 2011/07/02
    • Re: [Amps] What is the meaning of ACVFD ?, Gary Schafer, 2011/07/02
    • Re: [Amps] What is the meaning of ACVFD ?, Roger (sub1), 2011/07/02
    • Re: [Amps] What is the meaning of ACVFD ?, Roger (sub1), 2011/07/03