So our best bet is to order from Icom ?
Bob
K6UJ
On Mar 30, 2013, at 8:29 AM, Jim W7RY wrote:
> Cant buy them from Mouser. I too went through the exercise. And most of the
> plugs/pins that you buy on the net, (quick silver, The RFC etc) the female
> pins are too big for the male pins of the radio.
>
> At The RFC, the pins the sell with the plugs that are a different
> configuration and wont plug into the radio, are fine.
> But the pins they ship with the plugs that do plug into the radio, are too
> big and fit very loosely.
>
> Good luck!
> 73
> Jim W7RY
>
>
> -----Original Message----- From: Col. Paul E. Cater
> Sent: Saturday, March 30, 2013 6:16 AM
> To: Amps reflector
> Subject: [Amps] Molex Pins
>
> This is an obvious case of brain flatulence. I have ordered 4 different
> part numbers from Mouser for the *pins* only that fit the power connectors
> on Icom and other rigs. The standard 6 hole kind. I still don't have the
> correct size.
>
> Anyone have a part number for these off the top of their head? Male &
> female.
>
> Thanks,
> Paul
> WD8OSU
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|