[Amps] 6 pin molex-type power connectors on HF gear discontinued in 2002?, Kimo Chun, 2013/03/31

• Re: [Amps] 6 pin molex-type power connectors on HF gear discontinued in 2002?, Col. Paul E. Cater, 2013/03/31

[Amps] Molex Pins, Col. Paul E. Cater, 2013/03/30

• Re: [Amps] Molex Pins, Jim W7RY, 2013/03/30
  • Re: [Amps] Molex Pins, Bob K6UJ, 2013/03/30
    • Re: [Amps] Molex Pins, Val, 2013/03/30
  • Re: [Amps] Molex Pins, Paul Christensen, 2013/03/30
    • Re: [Amps] Molex Pins, Col. Paul E. Cater, 2013/03/30
    • Re: [Amps] Molex Pins, Jim W7RY, 2013/03/30
    • Re: [Amps] Molex Pins, K5WW Live, 2013/03/30
    • Re: [Amps] Molex Pins, Jim W7RY, 2013/03/30
    • Re: [Amps] Molex Pins, Joe Subich, W4TV, 2013/03/30
    • Re: [Amps] Molex Pins, Col. Paul E. Cater, 2013/03/31

[Amps] (no subject), john starr001, 2013/03/29

• [Amps] Alpha 87A - Gettering NOS 3CX800A7's, john starr001, 2013/03/29
  • Re: [Amps] Alpha 87A - Gettering NOS 3CX800A7's, Rick Stealey, 2013/03/30
    • Re: [Amps] Alpha 87A - Gettering NOS 3CX800A7's, Fern, 2013/03/30

[Amps] Alpha 87A - Gettering NOS 3CX800A7's, Jerry, 2013/03/29

• Re: [Amps] Alpha 87A - Gettering NOS 3CX800A7's, Carl, 2013/03/29
• Re: [Amps] Alpha 87A - Gettering NOS 3CX800A7's, TexasRF, 2013/03/30

[Amps] instability issue - a bit more info, N1BUG, 2013/03/27

• Re: [Amps] instability issue - a bit more info, Chris Wilson, 2013/03/27

[Amps] instability issue, Ron Youvan, 2013/03/27

• [Amps] instability issue, Jim Thomson, 2013/03/27

[Amps] instability issue, N1BUG, 2013/03/27

• Re: [Amps] instability issue, n8de, 2013/03/27
  • Re: [Amps] instability issue, N1BUG, 2013/03/27
    • Re: [Amps] instability issue, Carl, 2013/03/27
    • Re: [Amps] instability issue, Vic K2VCO, 2013/03/27
    • Re: [Amps] instability issue, Carl, 2013/03/27
    • Re: [Amps] instability issue, N1BUG, 2013/03/27
    • Re: [Amps] instability issue, Carl, 2013/03/27
    • Re: [Amps] instability issue, Ian White, 2013/03/27
• [Amps] instability issue, Jim Thomson, 2013/03/27
• Re: [Amps] instability issue, peter chadwick, 2013/03/27
  • Re: [Amps] instability issue, Fuqua, Bill L, 2013/03/27

[Amps] SB-200 QSK mod info, k3it, 2013/03/27

• Re: [Amps] SB-200 QSK mod info, Paul Christensen, 2013/03/27
  • Re: [Amps] SB-200 QSK mod info, Paul Christensen, 2013/03/27
    • Re: [Amps] SB-200 QSK mod info, k3it, 2013/03/27

[Amps] SB-230 drive VS power output, K4MT, 2013/03/26

• Re: [Amps] SB-230 drive VS power output, Ron Youvan, 2013/03/26

[Amps] AB1 input circuits, Vic K2VCO, 2013/03/25

• Re: [Amps] AB1 input circuits, Mike Tubby, 2013/03/26
  • Re: [Amps] AB1 input circuits, Leigh Turner, 2013/03/26

[Amps] 8650AS Grounded Grid, K4MT, 2013/03/25

• Re: [Amps] 8650AS Grounded Grid, Glen Zook, 2013/03/25
  • Re: [Amps] 8650AS Grounded Grid, Roger (K8RI), 2013/03/25
    • Re: [Amps] 8650AS Grounded Grid, Glen Zook, 2013/03/25
    • Re: [Amps] 8650AS Grounded Grid, Roger (K8RI), 2013/03/25
    • Re: [Amps] 8650AS Grounded Grid, Carl, 2013/03/25

Re: [Amps] Amps Digest, Vol 123, Issue 49, LB3HC, 2013/03/24

• Re: [Amps] Amps Digest, Vol 123, Issue 49, Bill Turner, 2013/03/24

[Amps] What is max grid current for YC-156 ??, Jim Thomson, 2013/03/24

• Re: [Amps] What is max grid current for YC-156 ??, Rob Atkinson, 2013/03/24
  • Re: [Amps] What is max grid current for YC-156 ??, Jim Thomson, 2013/03/24
    • Re: [Amps] What is max grid current for YC-156 ??, Alek Petkovic, 2013/03/24
• Re: [Amps] What is max grid current for YC-156 ??, Carl, 2013/03/24
• Re: [Amps] What is max grid current for YC-156 ??, Bryan Swadener, 2013/03/24

[Amps] "STARK"-Brand 9-66 Dynamic Tube Tester, Eddy Swynar, 2013/03/23

• [Amps] "STARK"-Brand 9-66 Dynamic Tube Tester, Eddy Swynar, 2013/03/24

[Amps] bad 572B's, kingwood, 2013/03/23

• Re: [Amps] bad 572B's, Carl, 2013/03/23

[Amps] Source for good 572B's tubes?, James McKellips, 2013/03/22

• Re: [Amps] Source for good 572B's tubes?, Alek Petkovic, 2013/03/23
  • Re: [Amps] Source for good 572B's tubes?, Carl, 2013/03/23
• Re: [Amps] Source for good 572B's tubes?, Mike, 2013/03/23
• Re: [Amps] Source for good 572B's tubes?, Hsu, 2013/03/23
  • Re: [Amps] Source for good 572B's tubes?, Carl, 2013/03/23
• Re: [Amps] Source for good 572B's tubes?, KA4INM, 2013/03/23

[Amps] SB-230 Grid Ring, K4MT, 2013/03/22

• Re: [Amps] SB-230 Grid Ring, KA4INM, 2013/03/23

[Amps] Blower Question, Jim Garland, 2013/03/22

• Re: [Amps] Blower Question, Jim Garland, 2013/03/23

[Amps] BURNING IN A TUBE, key, 2013/03/20

• Re: [Amps] BURNING IN A TUBE, Carl, 2013/03/20
• Re: [Amps] BURNING IN A TUBE, Colin Lamb, 2013/03/20
• [Amps] BURNING IN A TUBE, key, 2013/03/23
  • Re: [Amps] BURNING IN A TUBE, Carl, 2013/03/23
• Re: [Amps] BURNING IN A TUBE, Colin Lamb, 2013/03/23
  • Re: [Amps] BURNING IN A TUBE, Bill Turner, 2013/03/23
• Re: [Amps] BURNING IN A TUBE, TexasRF, 2013/03/23
  • Re: [Amps] BURNING IN A TUBE, donroden, 2013/03/23
    • Re: [Amps] BURNING IN A TUBE, Roger (K8RI), 2013/03/23
    • Re: [Amps] BURNING IN A TUBE, donroden, 2013/03/23
• Re: [Amps] BURNING IN A TUBE, peter chadwick, 2013/03/23
• Re: [Amps] BURNING IN A TUBE, peter chadwick, 2013/03/23

[Amps] BAD DEAL STAY AWAY!, Carey Lockhart, 2013/03/19

• Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Leigh Turner, 2013/03/19
  • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Tom Horton, 2013/03/19
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Eddie-kv5i, 2013/03/19
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Bill Turner, 2013/03/19
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, DAVE WHITE, 2013/03/20
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Rob Atkinson, 2013/03/20
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Carl, 2013/03/20
    • Message not available
    • Message not available
    • Re: [Amps] [RTTY] BAD DEAL STAY AWAY! / an alternative source, Bill Turner, 2013/03/20
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Dave Cole, 2013/03/20
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Carl, 2013/03/20
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Dave Cole, 2013/03/20
    • [Amps] Anyone recognize this amp / circuit?, Mark Beckwith, 2013/03/20
    • Re: [Amps] Anyone recognize this amp / circuit?, Carl, 2013/03/20
    • Re: [Amps] Anyone recognize this amp / circuit?, Jim Hargrave, 2013/03/20
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Carl, 2013/03/20
    • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Dave Cole, 2013/03/20
    • [Amps] Some thoughts about FL-2100 and SB-200 work in 6m, Hsu, 2013/03/22
  • Re: [Amps] BAD DEAL STAY AWAY! / an alternative source, Alek Petkovic, 2013/03/20
• Re: [Amps] BAD DEAL STAY AWAY!, DAVE WHITE, 2013/03/20
  • Re: [Amps] BAD DEAL STAY AWAY!, Carl, 2013/03/20

[Amps] SB-230 Power Question, K4MT, 2013/03/19

• Re: [Amps] SB-230 Power Question, n8de, 2013/03/19
• Re: [Amps] SB-230 Power Question, Roger (K8RI), 2013/03/19
  • Re: [Amps] SB-230 Power Question, Carl, 2013/03/19
• Re: [Amps] SB-230 Power Question, Paul Decker, 2013/03/19
  • Re: [Amps] SB-230 Power Question, n8de, 2013/03/19
    • Re: [Amps] SB-230 Power Question, Carl, 2013/03/19
    • Re: [Amps] SB-230 Power Question, Paul Decker, 2013/03/19
  • Re: [Amps] SB-230 Power Question, Fern, 2013/03/19

[Amps] email for Pat Bacon, W7UA, kingwood, 2013/03/18

• Re: [Amps] email for Pat Bacon, W7UA, Bryan Swadener, 2013/03/19

[Amps] Coupling a blower to an air system socket, Alan Ibbetson, 2013/03/15

• Re: [Amps] Coupling a blower to an air system socket, KA4INM, 2013/03/15
  • Re: [Amps] Coupling a blower to an air system socket, Bill Fuqua, 2013/03/15
    • Re: [Amps] Coupling a blower to an air system socket, Roger (K8RI), 2013/03/15
    • Re: [Amps] Coupling a blower to an air system socket, Carl, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Vic Rosenthal, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Carl, 2013/03/16
  • Re: [Amps] Coupling a blower to an air system socket, Pete Smith N4ZR, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Ian White, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Jim Garland, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Ian White, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Paul Hewitt, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Jim W7RY, 2013/03/16
    • Re: [Amps] Coupling a blower to an air system socket, Roger (K8RI), 2013/03/17
    • Re: [Amps] Coupling a blower to an air system socket, Ian White, 2013/03/17
    • Re: [Amps] Coupling a blower to an air system socket, Carl, 2013/03/17
    • Re: [Amps] Coupling a blower to an air system socket, Roger (K8RI), 2013/03/17
    • Re: [Amps] Coupling a blower to an air system socket, Carl, 2013/03/17
    • [Amps] SB220 cooling was: Re: Coupling a blower to an air system socket, Pete Smith N4ZR, 2013/03/18
    • Re: [Amps] SB220 cooling was: Re: Coupling a blower to an air system socket, Bill Turner, 2013/03/18
    • Re: [Amps] SB220 cooling was: Re: Coupling a blower to an air system socket, Carl, 2013/03/18
    • Re: [Amps] Coupling a blower to an air system socket, KA4INM, 2013/03/17
• [Amps] Coupling a blower to an air system socket, Jim Thomson, 2013/03/16
• [Amps] Coupling a blower to an air system socket, John Lyles, 2013/03/16
• [Amps] Coupling a blower to an air system socket, Jim Thomson, 2013/03/17
• [Amps] Coupling a blower to an air system socket, John Lyles, 2013/03/17
• [Amps] Coupling a blower to an air system socket, John Lyles, 2013/03/17
• [Amps] Coupling a blower to an air system socket, Jim Thomson, 2013/03/18
  • Re: [Amps] Coupling a blower to an air system socket, Roger (K8RI), 2013/03/18
• [Amps] Coupling a blower to an air system socket, Jim Thomson, 2013/03/18
• [Amps] Coupling a blower to an air system socket, Jim Thomson, 2013/03/18

[Amps] AL80B low power, art421, 2013/03/14

• Re: [Amps] AL80B low power, Gudguyham, 2013/03/14
• [Amps] AL80B low power, Art, 2013/03/14
  • Re: [Amps] AL80B low power, Carl, 2013/03/15
• Re: [Amps] AL80B low power, Gudguyham, 2013/03/14
• [Amps] AL80b low power, Art, 2013/03/22
  • Re: [Amps] AL80b low power, Rob Atkinson, 2013/03/23
  • Re: [Amps] AL80b low power, Bill Turner, 2013/03/23
    • Re: [Amps] AL80b low power, Carl, 2013/03/23
    • Re: [Amps] AL80b low power, Robert Dorchuck W6VY, 2013/03/23
• [Amps] AL80b low power, Jim Thomson, 2013/03/23

[Amps] Neutralizing push-pull amp, B Osburn, 2013/03/14

• Re: [Amps] Neutralizing push-pull amp, Vic K2VCO, 2013/03/14
  • Re: [Amps] Neutralizing push-pull amp, Carl, 2013/03/14
• Re: [Amps] Neutralizing push-pull amp, Carl, 2013/03/14

[Amps] Russian caps, Carey Lockhart, 2013/03/14

• Re: [Amps] Russian caps, Máximo EA1DDO_HK1H, 2013/03/14

Re: [Amps] 8877 won't load on 80M, Dick NY1E, 2013/03/13

• Re: [Amps] 8877 won't load on 80M, Ron Youvan, 2013/03/13
• Re: [Amps] 8877 won't load on 80M, n8de, 2013/03/13
  • Re: [Amps] 8877 won't load on 80M, Mike Tubby, 2013/03/14
    • Re: [Amps] 8877 won't load on 80M, Dick NY1E, 2013/03/15
• Re: [Amps] 8877 won't load on 80M, TexasRF, 2013/03/15

[Amps] Power factor correction, Steve Thompson, 2013/03/12

• Re: [Amps] Power factor correction, Bill Fuqua, 2013/03/12
  • Re: [Amps] Power factor correction, Larry Benko, 2013/03/12

[Amps] What Old Amp to Buy?, Pete Smith N4ZR, 2013/03/12

• Re: [Amps] What Old Amp to Buy?, n8de, 2013/03/12
  • Re: [Amps] What Old Amp to Buy?, Carl, 2013/03/12
  • Re: [Amps] What Old Amp to Buy?, Jerry Muller, 2013/03/13
• Re: [Amps] What Old Amp to Buy?, Robert Logan, 2013/03/12
• Re: [Amps] What Old Amp to Buy?, Robert Logan, 2013/03/12
• Re: [Amps] What Old Amp to Buy?, Carl, 2013/03/12
• Re: [Amps] What Old Amp to Buy?, Paul, 2013/03/12
• Re: [Amps] What Old Amp to Buy?, Hal W5GHZ, 2013/03/12
• Re: [Amps] What Old Amp to Buy?, k6ye, 2013/03/12
  • Re: [Amps] What Old Amp to Buy?, Roger (K8RI), 2013/03/12

Re: [Amps] Freescale LDMOS devices / load mismatch survival, Steve Thompson, 2013/03/11

• Re: [Amps] Freescale LDMOS devices / load mismatch survival, Peter Frenning [OZ1PIF], 2013/03/11
  • Re: [Amps] Freescale LDMOS devices / load mismatch survival, George, 2013/03/11
• Re: [Amps] Freescale LDMOS devices / load mismatch survival, Steve, 2013/03/11

[Amps] Unique Henry Classic VHF console amps on QTH, Donald Fox, 2013/03/10

• Re: [Amps] Unique Henry Classic VHF console amps on QTH, Richard Solomon, 2013/03/10
  • Re: [Amps] Unique Henry Classic VHF console amps on QTH, Jim W7RY, 2013/03/10
  • Re: [Amps] Unique Henry Classic VHF console amps on QTH, Carl, 2013/03/11
    • Re: [Amps] Unique Henry Classic VHF console amps on QTH, Jeff DePolo, 2013/03/12
    • Re: [Amps] Unique Henry Classic VHF console amps on QTH, gdaught6, 2013/03/12
• Re: [Amps] Unique Henry Classic VHF console amps on QTH, Richard Solomon, 2013/03/11
  • Re: [Amps] Unique Henry Classic VHF console amps on QTH, Roger (K8RI), 2013/03/11
  • Re: [Amps] Unique Henry Classic VHF console amps on QTH, Carl, 2013/03/11

[Amps] Expert 2K / lack of specs / pragmatism prevails, Jim Thomson, 2013/03/10

• Re: [Amps] Expert 2K / lack of specs /, Joe Giacobello, K2XX, 2013/03/10
• Re: [Amps] Expert 2K / lack of specs / pragmatism prevails, Leigh Turner, 2013/03/10

[Amps] FW: ?Power factor correction on tube amps, Jim Thomson, 2013/03/10

• Re: [Amps] FW: ?Power factor correction on tube amps, Mike, 2013/03/10
  • Re: [Amps] FW: ?Power factor correction on tube amps, Bill Turner, 2013/03/10

[Amps] rms Volts, Amps and Watts, Steve Thompson, 2013/03/09

• Re: [Amps] rms Volts, Amps and Watts, Paul Christensen, 2013/03/09
  • Re: [Amps] rms Volts, Amps and Watts, Rob Atkinson, 2013/03/09
  • Re: [Amps] rms Volts, Amps and Watts, Carl, 2013/03/09
    • Re: [Amps] rms Volts, Amps and Watts, Bill Turner, 2013/03/09
    • Re: [Amps] rms Volts, Amps and Watts, KA4INM, 2013/03/10
    • Re: [Amps] rms Volts, Amps and Watts, Carl, 2013/03/10
• Re: [Amps] rms Volts, Amps and Watts, Bill Turner, 2013/03/10
• [Amps] rms Volts, Amps and Watts, Jim Thomson, 2013/03/10
  • Re: [Amps] rms Volts, Amps and Watts, Bill Turner, 2013/03/10
• Re: [Amps] rms Volts, Amps and Watts, peter chadwick, 2013/03/10

[Amps] FW: Power factor correction on tube amps, Jim Thomson, 2013/03/09

• Re: [Amps] FW: Power factor correction on tube amps, Richard Solomon, 2013/03/09
  • Re: [Amps] FW: Power factor correction on tube amps, Roger (K8RI), 2013/03/09
    • Re: [Amps] FW: Power factor correction on tube amps, George, 2013/03/09
    • Re: [Amps] FW: Power factor correction on tube amps, Roger (K8RI), 2013/03/10
    • Re: [Amps] FW: Power factor correction on tube amps, Jeff Blaine, 2013/03/10
    • Re: [Amps] FW: Power factor correction on tube amps, Bill Turner, 2013/03/10
• Re: [Amps] FW: Power factor correction on tube amps, peter chadwick, 2013/03/09
  • Re: [Amps] FW: Power factor correction on tube amps, Roger (K8RI), 2013/03/09
    • Re: [Amps] FW: Power factor correction on tube amps, Bill Turner, 2013/03/09
• Re: [Amps] FW: Power factor correction on tube amps, peter chadwick, 2013/03/10
• Re: [Amps] FW: Power factor correction on tube amps, Ward Silver, 2013/03/10
  • Re: [Amps] FW: Power factor correction on tube amps, Carl, 2013/03/10
    • Re: [Amps] FW: Power factor correction on tube amps, Ward Silver, 2013/03/10
  • Re: [Amps] FW: Power factor correction on tube amps, Roger (K8RI), 2013/03/10
  • Re: [Amps] FW: Power factor correction on tube amps, Bill Turner, 2013/03/10
    • Re: [Amps] FW: Power factor correction on tube amps, Doug Renwick, 2013/03/10
    • Re: [Amps] FW: Power factor correction on tube amps, Bill Turner, 2013/03/10
    • Re: [Amps] FW: Power factor correction on tube amps, Doug Renwick, 2013/03/10

Re: [Amps] FW:  Power factor correction on tube amps, peter chadwick, 2013/03/09

• Re: [Amps] FW:  Power factor correction on tube amps, Roger (K8RI), 2013/03/09
  • Re: [Amps] FW:  Power factor correction on tube amps, George, 2013/03/09
    • Re: [Amps] FW:  Power factor correction on tube amps, Bill Turner, 2013/03/09

[Amps] Freescale LDMOS devices, John Lyles, 2013/03/07

• Re: [Amps] Freescale LDMOS devices, Roger, 2013/03/08
  • Re: [Amps] Freescale LDMOS devices, Bill Turner, 2013/03/08
    • Re: [Amps] Freescale LDMOS devices, Bill Fuqua, 2013/03/08
  • Re: [Amps] Freescale LDMOS devices, Carl, 2013/03/08
    • Re: [Amps] Freescale LDMOS devices, Larry Benko, 2013/03/08
    • Re: [Amps] Freescale LDMOS devices, Carl, 2013/03/08
    • Re: [Amps] Power Factor correction, John G3UUT, 2013/03/08
    • [Amps] Honda 2000i Portable Use, Jim Brown, 2013/03/08
    • Re: [Amps] Power Factor correction, Bill Turner, 2013/03/08
    • Re: [Amps] Freescale LDMOS devices, jeff millar, 2013/03/08
    • Re: [Amps] Freescale LDMOS devices, Carl, 2013/03/09
    • Re: [Amps] Freescale LDMOS devices, David Kirkby, 2013/03/12
    • Re: [Amps] Freescale LDMOS devices, David Kirkby, 2013/03/12
• Re: [Amps] Freescale LDMOS devices, George, 2013/03/09
  • Re: [Amps] Freescale LDMOS devices, John Lyles, 2013/03/10
• Re: [Amps] Freescale LDMOS devices, Paul Decker, 2013/03/09
  • Re: [Amps] Freescale LDMOS devices, George, 2013/03/09
    • Re: [Amps] Freescale LDMOS devices / load mismatch survival, Leigh Turner, 2013/03/09
    • Re: [Amps] Freescale LDMOS devices / load mismatch survival, George, 2013/03/10
    • Re: [Amps] Freescale LDMOS devices / load mismatch survival, Leigh Turner, 2013/03/10
    • Re: [Amps] Freescale LDMOS devices / load mismatch survival, Roger (K8RI), 2013/03/10
    • Re: [Amps] Freescale LDMOS devices / load mismatch survival, George, 2013/03/11
• [Amps] Freescale LDMOS devices, Jim Thomson, 2013/03/12

[Amps] FW: Power factor correction on tube amps, KM5VI, 2013/03/07

• Re: [Amps] FW: Power factor correction on tube amps, KA4INM, 2013/03/07
  • Re: [Amps] FW: Power factor correction on tube amps, Jim Brown, 2013/03/07
    • Re: [Amps] FW: Power factor correction on tube amps, Leigh Turner, 2013/03/07
    • Re: [Amps] FW: Power factor correction on tube amps, Bill Turner, 2013/03/07
    • Re: [Amps] FW: Power factor correction on tube amps, Bill Fuqua, 2013/03/08
• Re: [Amps] FW: Power factor correction on tube amps, Jim Brown, 2013/03/07
  • Re: [Amps] FW: Power factor correction on tube amps, KA4INM, 2013/03/07
    • Re: [Amps] FW: Power factor correction on tube amps, Jim Brown, 2013/03/07
    • Re: [Amps] FW: Power factor correction on tube amps, Carl, 2013/03/08
    • Re: [Amps] FW: Power factor correction on tube amps, Jim Brown, 2013/03/08
    • Re: [Amps] FW: Power factor correction on tube amps, Bill Fuqua, 2013/03/09

[Amps] Expert 1k amp, Steve Thompson, 2013/03/07

• Re: [Amps] Expert 1k amp, Paul Christensen, 2013/03/07
  • Re: [Amps] Expert 1k amp, Carl, 2013/03/07
    • Re: [Amps] Expert 1k amp, tlthompson, 2013/03/07
• Re: [Amps] Expert 1k amp, peter chadwick, 2013/03/07
  • Re: [Amps] Expert 1k amp, Steve, 2013/03/07
  • Re: [Amps] Power factor correction on tube amps, amps, 2013/03/07
• Re: [Amps] Expert 1k amp, TexasRF, 2013/03/07
• Re: [Amps] Expert 1k amp, Steve Thompson, 2013/03/07

[Amps] amplex KW-62 amplifier, Carey Lockhart, 2013/03/06

• Re: [Amps] amplex KW-62 amplifier, n8de, 2013/03/06

[Amps] Expert 2K / lack of specs, Jim Thomson, 2013/03/05

• Re: [Amps] Expert 2K / lack of specs / pragmatism prevails, Leigh Turner, 2013/03/05

Re: [Amps] Heatsinks for SSPAs, Paul Decker, 2013/03/04

• Re: [Amps] Heatsinks for SSPAs, Bill Turner, 2013/03/04
• Re: [Amps] Heatsinks for SSPAs, Steve Thompson, 2013/03/04

[Amps] Expert 2K, Jim Thomson, 2013/03/04

• Re: [Amps] Expert 2K, Paul Christensen, 2013/03/04
  • Re: [Amps] Expert 2K, Joe Giacobello, K2XX, 2013/03/05
    • Re: [Amps] Expert 2K, Rob Atkinson, 2013/03/05
    • Re: [Amps] Expert 2K, Joe Giacobello, K2XX, 2013/03/05
• Re: [Amps] Expert 2K, Alex Eban, 2013/03/04
• Re: [Amps] Expert 2K / lack of specs, Leigh Turner, 2013/03/04

[Amps] Transformer choice, Ulf (SM0NOR), 2013/03/04

• Re: [Amps] Transformer choice, Jim Garland, 2013/03/04
  • Re: [Amps] Transformer choice, Carl, 2013/03/04
    • Re: [Amps] Transformer choice, Hsu, 2013/03/04
    • Re: [Amps] Transformer choice, Ulf (SM0NOR), 2013/03/04
    • Re: [Amps] Transformer choice, Carl, 2013/03/04
    • Re: [Amps] Transformer choice, Ulf (SM0NOR), 2013/03/04
• Re: [Amps] Transformer choice, Carl, 2013/03/04
  • Re: [Amps] Transformer choice, Ulf (SM0NOR), 2013/03/04
    • Re: [Amps] Transformer choice, Carl, 2013/03/04
• [Amps] Transformer choice, Jim Thomson, 2013/03/04
  • Re: [Amps] Transformer choice, Ulf (SM0NOR), 2013/03/04

Re: [Amps] Autek WM-1 calibrated..., KG8YN, 2013/03/04

• Re: [Amps] Autek WM-1 calibrated..., Alek Petkovic, 2013/03/04

[Amps] Chinese new amplifeir, new killer, Hsu, 2013/03/02

• Re: [Amps] Chinese new amplifeir, new killer, Dr. David Kirkby, 2013/03/03

[Amps] 430-7102-A Transformers, Charles Mills, 2013/03/02

• Re: [Amps] 430-7102-A Transformers, Jim W7RY, 2013/03/02
  • Re: [Amps] 430-7102-A Transformers, Charles Mills, 2013/03/02
    • Re: [Amps] 430-7102-A Transformers, Charles Mills, 2013/03/03

[Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, peter chadwick, 2013/03/01

• Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Bill Turner, 2013/03/01
• Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Mike Tubby, 2013/03/04
  • Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Conrad Farlow, 2013/03/04
    • Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Conrad Farlow, 2013/03/04
    • Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Mike Tubby, 2013/03/04
    • Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Col. Paul E. Cater, 2013/03/04
    • Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Mike Tubby, 2013/03/04
    • Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Col. Paul E. Cater, 2013/03/04
• Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, DAVE WHITE, 2013/03/04
  • Re: [Amps] FW: Re: Heatsinks for SSPAs - Newbie Questions and UK source, Ian White, 2013/03/04

[Amps] Heatsinks for SSPAs - Newbie Questions and UK source, Conrad Farlow, 2013/03/01

• Re: [Amps] Heatsinks for SSPAs - Newbie Questions and UK source, Bill Turner, 2013/03/01
• Re: [Amps] Heatsinks for SSPAs - Newbie Questions and UK source, TexasRF, 2013/03/01
• Re: [Amps] Heatsinks for SSPAs - Newbie Questions and UK source, Manfred Mornhinweg, 2013/03/01

[Amps] Chimney Material, Joseph W. Morgan, 2013/03/01

• Re: [Amps] Chimney Material, Paul, 2013/03/01
  • Re: [Amps] Chimney Material, L L bahr, 2013/03/01
• Re: [Amps] Chimney Material, Dan Simmonds, 2013/03/01

[Amps] Coils for vacuum relays, kingwood, 2013/03/01

• Re: [Amps] Coils for vacuum relays, VE6WZ_Steve, 2013/03/01
• Re: [Amps] Coils for vacuum relays, Jim W7RY, 2013/03/01

[Amps] centralab switch, Paul Manuel, 2013/03/01

• Re: [Amps] centralab switch, Carl, 2013/03/01

Re: [Amps] 813 efficiency, Rob Atkinson, 2013/03/01

• Re: [Amps] 813 efficiency, Paul Baldock, 2013/03/01
  • Re: [Amps] 813 efficiency, Carl, 2013/03/01
    • Re: [Amps] 813 efficiency, Richard Solomon, 2013/03/01
  • Re: [Amps] 813 efficiency, Bill Turner, 2013/03/01
    • Re: [Amps] 813 efficiency, Paul Baldock, 2013/03/01
• Re: [Amps] 813 efficiency, Bill Turner, 2013/03/01
• Re: [Amps] 813 efficiency, Carl, 2013/03/01
• Re: [Amps] 813 efficiency, peter chadwick, 2013/03/01
  • Re: [Amps] 813 efficiency, Carl, 2013/03/01