They are usually on EBay. There is a fellow in Main that will rewind
transformers. He does good work. He rewound a Collins 516F2 choke for me.
http://members.tripod.com/tubes_tubes_tubes/transformerrewindingservice/
It's:
10 volts CT at 15 amps
80 VAC @ 100ma (relays and cutoff bias)
8 VAC @ 200-400 ma for the pilot lamps. Lamps are (lamps are 50 ma each,
there are 6 of them)
most have 120, and 100 volt taps on the primary. If your only going to use
it in the USA, you don’t need the 100 volt primary windings.
73
Jim W7RY
-----Original Message-----
From: greg greene
Sent: Monday, December 21, 2015 9:19 AM
To: amps@contesting.com
Subject: [Amps] TL-922A Filament Transformer
Howdy folks
I'm trying to track down some info on the electrical specs of this
transformer to see if I can have a replacement made.
I've checked the manual - but do not see anything there that I can send the
repair outfit.
Thanks !
73
Greg
VE7GPG
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|