Chad Kurszewski WE9V wrote:
> >Looking for any mods that allow you to use the Internal Keyer
> >in the FT-1000 and also use an external Keyer
>
> >From what I've been able to decipher in the schematic, it uses >something
> >like a Curtis keying IC. It has an input that tells it >eletronic keyer, or
> >not.
>
> There do not appear to be two seperate circuits for electronic versus
> manual.
>
> I suppose you could find the output pin and add an external NPN switch
> in parallel. Has anyone done that???
Been there, Looked at it on the MP, decided NOT to go that route ...
You'd have to cut some traces/etc ... since it "broke" my KISS rule,
I went the old fashioned route and just use my ancient Autek MK-1
and external paddle in parallel with the PC. For me it worked FB
as I can set the MK-1 memories different from the PC software and
at different speeds. Also if one or the other dies, I can still
keep on going ... Still it would be nice to use the internal one ...
73 and Happy NU Year !
Bill AA4NU aa4nu@ix.netcom.com
>From rocker@datasync.com (Ray Rocker) Tue Dec 31 00:01:12 1996
From: rocker@datasync.com (Ray Rocker) (Ray Rocker)
Subject: FW: Robot e-mail adress for callbook & QSL info ?
Message-ID: <199612310001.SAA09820@osh1.datasync.com>
>I'm looking for the e-mail robot adress ( not WEB ) for callbook and QSL
>info. I remember that it was an adress in Germany ( something@augsburg3...)
>and another in U.S.
The new address for that service is: qsl-info@datasync.com
It only serves QSL route information, not callbook addresses.
-- Ray WQ5L rocker@datasync.com
>From andrew@gi0nwg.demon.co.uk (Andrew Williamson) Mon Dec 30 23:06:59 1996
From: andrew@gi0nwg.demon.co.uk (Andrew Williamson) (Andrew Williamson)
Subject: ARRL RTTY Roundup rules query
Message-ID: <9pb0SFATsEyyEwll@gi0nwg.demon.co.uk>
Hi all,
I have two quick queries about the rules for ARRL RTTY this weekend for
the multi-single category.
1. Is the multi-single category, restricted to 24 out of the 30 hours
operating or is that only for single operators ?
2. The multi-single category has a 10 minute rule, but is that like CQWW
SSB and CW contests where you can have a 'multi' station working only
multipliers, but must remain on a band for 10 minutes or is it
just one transmitter, period ?
Myself and GI0KOW will be entering multi-single as GI0KOW, so would like
the clarification please.
Look forward to working you in the contest.
73's
Andrew Williamson GI0NWG / AC6WI
|