----- Original Message -----
From: "Maurizio Panicara" <i4jmy@iol.it>
Snipped for brevity.....
> Unless the AM station is just on the high edge of MW, an high pass filter
> could be also a stable solution.
>
> 73,
> Mauri I4JMY
Hello All:
I had a similar problem due to a 50Kw station that moved their transmitter
site to a spot only about 3 miles from my previously RF quiet location. It
was totally cleaned up by using an Industrial Communications Engineering
(ICE) high pass filter. The only drawback is that it is limited to
approximately 300 watts, so I use it between the transceiver and the linear
amplifier.
The URL for ICE is http://www.inducomm.net/
The page for the BCB filter is
http://www.inducomm.net/pieces/fitersrf.html#bcb
Regards to all,
Lee Smith
VE4ANC
--
FAQ on WWW: http://www.contesting.com/FAQ/rfi
Submissions: rfi@contesting.com
Administrative requests: rfi-REQUEST@contesting.com
Questions: owner-rfi@contesting.com
|