I had a customer who had success in this application using the -43 1/2" split
beads --
The manufacturer's data for these shows 50 ohms (per bead) @ 4 MHz, 75 ohms @
7 Mhz, 150 ohms @ 14 MHz. Whether they work or not depends on the RF
impedance of the circuit being protected. This you usually don't know so you
just have
to try them. -- I'd advise against splitting toroids. The material is awful
to work with; harder than a rock but shatters easily -- Jack, K6NY, Palomar
Engineers
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|