On Mon,12/29/2014 11:50 AM, Jim Miller wrote:
I recently purchased a Tecsun -PL380 but overlooked the detail that it
doesn't cover 1710-2300 at all so it will also soon be sold.
I wouldn't be in a big hurry to do that -- most noise sources that we
hear on 160M will also be heard both above and below 160M -- they're
either clocks for microprocessors, switching power supplies, or impulse
noise from the power system.
So now I'm looking at the TH-F6a which has a ferrite bar for 10Mhz and
down.
The TH-F6A does, indeed, have the directivity you would expect from a
loopstick, but its sensitivity is quite poor. I use it when I get very
close to sources in that frequency range -- it's great for identifying
WHICH box or cables are radiating the trash. The Tecsun has FAR better
sensitivity.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|