RFI
[Top] [All Lists]

Re: [RFI] Yet another balun question

To: "[email protected]" <[email protected]>
Subject: Re: [RFI] Yet another balun question
From: JW via RFI <[email protected]>
Reply-to: JW <[email protected]>
Date: Wed, 29 Jun 2016 16:09:19 +0000 (UTC)
List-post: <[email protected]">mailto:[email protected]>
re: ZS1AN's cascade
Are we talking ferrite loaded TLTs (transmission line transformer) or flux 
coupled transformers and ferrite loaded "chokes" in his design?
I can never keep this current-voltage balun stuff straight.
de Jim WB5WPA


      From: Cortland Richmond <[email protected]>
 To: [email protected] 
 Sent: Wednesday, June 29, 2016 6:26 AM
 Subject: Re: [RFI] Yet another balun question
   
On 6/28/2016 6:29 PM, Jim Brown wrote:
> For 80M to about 15M, one of the bifilar chokes I've described wound 
> with 12 turns of a pair of #12 enameled wire or #12 THHN should 
> provide about 5K ohms of choking Z. If the antenna is reasonably well 
> balanced and resonant, 

I've been intrigued by the ZS1AN's cascade of a voltage "Balun" for the 
impedance desired, followed by a current Balun to ensure balance.

Cortland
KA5S

_______________________________________________
RFI mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/rfi


  
_______________________________________________
RFI mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>