Hello Gary,
What power are you running? Full legal or less? Thanks, Bruce
On 12/5/2018 1:14 PM, Gary Smith wrote:
I have used Kidde brand and have had no problems with xmt/rcv issues
with them.
Gary...wa6fgi
On 12/4/2018 7:35 PM, Jim Brown wrote:
I have no experience with this company, but security/alarm products
and systems are notorious for being susceptible to RF. If the units
are connected to wires or power, they are almost certain to be bad
news. If they run on batteries with NO wires connecting them to
anything, there's a chance that they're OK.
The fundamental issue here is that they need wire to form an antenna
to radiate or receive RF.
73, Jim K9YC
On 12/4/2018 7:09 PM, Ray Mikula wrote:
Does anyone have any experience with the Wireless First Alert Smoke/CO
detectors in regards to RFI? This is the setup where you have multiple
smoke detectors and if one unit alarms a wireless signal is send via
a mesh
network to trigger the alarm on all units. My smoke alarms are a
good bit
older than 10 years and it is time to replace. The concept of one
alarm
triggering all makes good sense to me unless they generate a bunch
of nasty
RFI.
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|