RFI
[Top] [All Lists]

Re: [RFI] SDR software that displays actual waveform of received signal?

To: RFI <rfi@contesting.com>
Subject: Re: [RFI] SDR software that displays actual waveform of received signal????
From: Gedas <w8bya@mchsi.com>
Date: Mon, 3 Feb 2020 10:45:29 -0500
List-post: <mailto:rfi@contesting.com>
PSDR will definitely do what you want (I use the feature on my Flex 5000) but I do not know about it's use on specific platforms other then flex. I have heard of other receivers using PSDR so it is possible.

Gedas, W8BYA EN70

Gallery at http://w8bya.com
Light travels faster than sound....
This is why some people appear bright until you hear them speak.

On 2/3/2020 9:21 AM, EDWARDS, EDDIE J via RFI wrote:
Don,

I just purchased an SDRPlay unit, and on their web site they have free 
downloads of SDR UNO.  Just did the download here at work, so I'm sure you'll 
be able to as well.  https://www.sdrplay.com/downloads/

Have not had time to set up an antenna and test it out yet.  It'll be a spring 
project when I get time.  I think Dave, NK7Z uses this SDR radio and app.

73, de ed -K0iL


-----Original Message-----
From: RFI On Behalf Of Don Kirk
Sent: Monday, February 3, 2020 7:24 AM

Appreciate someone pointing me toward SDR software that can accomplish this 
task, especially if I can use it with an RTL-SDR receiver.  I believe I have 
seen SDR software that can accomplish this, but don't recall what software it 
was, and if it would work with an RTL-SDR receiver.

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>