RTTY
[Top] [All Lists]

Re: [RTTY] Tinyfsk, 2Tone and USOS

To: Mark n2qt <n2qt.va@gmail.com>
Subject: Re: [RTTY] Tinyfsk, 2Tone and USOS
From: Charles Lind <cxl24@case.edu>
Date: Mon, 28 Sep 2015 13:02:21 +0000
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
I did some experimenting:  Using Writelog or N1MM+ with a macro "599 05 NY
NY" sending with 2Tone/Tinyfsk.......a second rig (756 Pro) set up with
plain vanilla MMTTY receives "599 05 ,6 ,6".  To get proper receive the
MMTTY USOS button must be manually depressed.  Copy on the 756 Pro decode
window is always correct.  Inserting hyphens into the macro corrects
things.  Switching out to a simple transistor interface sending via MMTTY
always gives correct print on the remote receive rig, whether or not the
USOS button is depressed.  I would suggest that if Vlad and Mark--and I'm
sure all those hams who asked for state repeats--are seeing this odd print,
that there is something going on with the Tinyfsk interface.

Chuck, N8CL

On Mon, Sep 28, 2015 at 1:25 AM, Mark n2qt <n2qt.va@gmail.com> wrote:

> Yes I saw this also.  Seemed like 2tone decoded ok, but mmtty didn't.  Not
> just reversed.
> Yet another thing to watch for
>
> Mark. N2QT
>
> > On Sep 27, 2015, at 8:21 PM, V. Sidarau <vs_otw@rogers.com> wrote:
> >
> > Whatever it is, this time around I have had a few guys sending like :5
> and
> > 5/ instead of TX time by time.
> >
> > 73,
> >
> > Vlad VE3IAE
> >
> > --
> >
> >
> >
> > -----Original Message-----
> > From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of David G3YYD
> > Sent: Sunday, September 27, 2015 4:04 PM
> > To: 'Charles Lind'
> > Cc: rtty@contesting.com
> > Subject: Re: [RTTY] Tinyfsk, 2Tone and USOS
> >
> > Like I said TinyFSK sets the shift pattern not 2Tone. As you have the
> source
> > code can always modify it. Personally I always use 2Tone DOOK.
> >
> > 73 David
> >
> > -----Original Message-----
> > From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Charles
> Lind
> > Sent: 27 September 2015 19:50
> > To: David G3YYD
> > Cc: reflector RTTY
> > Subject: Re: [RTTY] Tinyfsk, 2Tone and USOS
> >
> > I just swapped out interfaces and put in an FSKit with MMTTY on transmit
> and
> > receive, and removed all the dashes.  The clone window prints "05 ny ny"
> OK,
> > with and without the USOS button pushed, and I get no requests for
> repeats.
> > Back to Tinyfsk/2Tone on transmit again i see "05 ny ny" misprint in the
> > MMTTY clone--if the USOS is not pushed-- and some stations request
> repeats.
> > As it stands, with Tinyfsk /2Tone I need dashes in the macros to avoid a
> lot
> > of repeats.
> >
> > 73, Chuck, N8CL
> >
> >> On Sun, Sep 27, 2015 at 7:14 PM, David G3YYD <g3yyd@btinternet.com>
> wrote:
> >>
> >> Chuck
> >>
> >> 2Tone sends ITA5 characters that have a ITA2 translation to TinyFSK (&
> >> rpiFSK same interface). All characters that do not have a ITA2
> >> equivalent are ignored. The USOS is part of the TinyFSK in this case
> >>
> >> The distant end needs to turn on USOS as the vast majority of RTTY
> >> users have USOS on.
> >>
> >> 2Tone has USOS turned on for RX and FSK/AFSK/DOOK TX. There is no way
> >> to turn it off either. Deliberate policy on my part to ensure USOS is
> >> used as it significantly reduces the chance of being int he wrong shift.
> >>
> >> 73 David G3YYD
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Charles
> >> Lind
> >> Sent: 27 September 2015 17:58
> >> To: rtty@contesting.com
> >> Subject: [RTTY] Tinyfsk, 2Tone and USOS
> >>
> >> I was trying out a new Tinyfsk interface with Writelog and 2Tone as
> >> the transmit modem, and had numerous requests for repeats of the state
> >> in the macro "599 05 ny ny", and noticed that ny was not printing
> >> properly in an MMTTY clone window.  Hitting the USOS button in the
> >> MMTTY clone window made "ny" print in the clone window, but not for
> >> the hams trying to get my message.  Adding dashes "599 05-ny-ny"  did
> >> the job, but I have not had this problem in the past with other
> >> interfaces (two transistor and FSKit) using MMTTY.  Is this a property
> >> unique to 2Tone and/or Tinyfsk?
> >>
> >> Tnx, Chuck, N8CL
> >> _______________________________________________
> >> RTTY mailing list
> >> RTTY@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/rtty
> >>
> >> _______________________________________________
> >> RTTY mailing list
> >> RTTY@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/rtty
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>