I hate to interrupt the forum with a real TT question, but here go's:
I have a 13 year old TT Centurion Amplifier which I have own for about 2
years. I have it hooked up in break-in mode with my IC-756PRO3.
The CW key the input into the amp and the amp keys the rig. There is a PTT
line.
All has been working well until earlier this week. The amp no longer keys the
rig.
The 'transmit' light flashes with the keying but doesn't key the rig.
I tried the amp on SSB and RTTY and it works fine with full output.
I then unhooked the CW key from the amp and put it in the key jack in the back
of the rig.
It works fine in semi-breaking mode.
The manual says the following:
I believe it is the QSK board but thought I would ask the group here before I
order a new board.
Thank you,
Joe K0BX
Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk) without
my permission.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|