The hardware optional NB for the Eagle does eliminate the pulse
ignition/injector noise in my truck mobile and it does not punch holes in
the audio.
73
Bob, K4TAX
----- Original Message -----
From: "Dave Edwards" <kd2e@comcast.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Thursday, March 27, 2014 9:32 PM
Subject: Re: [TenTec] Corsair II noise blanker
The only noise blanker I ever found to help things was the one on the
Drake R4C.
....Dave
On 3/27/14, 10:07 PM, Brian Carling wrote:
Do any of these TT noise blankers do anything for you guys. Mine appears
to do very little in my Omni VI Plus...
Best regards - Bry Carling
On Mar 26, 2014, at 10:03 PM, "A R" <raf_3@msn.com> wrote:
Of my two Corsair II's, one has a NB board p/n 80977, which correspond
to the NB called out in the manual. The other Corsair II has a NB board
p/n 81401, for which I've not been able to find any documentation.
TenTec has been unable to find documentation for this NB, despite the
fact that it appears to be of production quality (not one-off lab bench
quality). Does anyone else have a Corsair II with the 81401 NB, or any
information (schem and interface interconnect) for this NB? The 81401 NB
has roughly 2/3 the component count of the 80977, and has no unpopulated
holes or device hole patterns. S/N of the Corsair II with the "rogue" NB
is 561-02258.
Thanks,
Allen---W7GIF
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|