Also check that the power poles are properly seated in the back of the rig,
especially if there has been any stress on the power cable externally. I
had a similar problem and this was the cause.
-----Original Message-----
From: Paul A. Ramey
Sent: Monday, June 30, 2014 12:32 AM
To: tentec@contesting.com
Subject: [TenTec] Orion not TXing
I need some help.
I have an Orion, 565. Turned it on today and RX working FB. When I
tried to transmit, no power out, ALC light or meter movement while
transmitting.
I can RX on any band, the voice recorder works and I can hear it when I
key with mic or send 1,2,&3
I get the same problem on A and B VFO's all controls work and function
as they should............but I am not getting any power out or
indication of power out. The SWR reads 1.01 when I try to TX.
Any ideas?
Thanks!
Paul, WG0G
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|