Years ago, W8JI suggested using RF chokes with sufficient inductance to
"ground" the non-driven elements of my C-3Es at 160M while maintaining
their isolation from the boom on 20-10 meters. The driven elements are
already grounded through the hairpin matching inductors.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000
On 9/30/2010 3:30 PM, Marc Wullaert ON4MA wrote:
> Hello all,
>
> I wash to busy to rebuild my C31XR insulators. The 20m reflector insulator
> wash burned while transmitting on 160m.
> Greg how did you ground the elements inside a stepper ?
> I'm replacing my tower next year and thinking to ground my reflectors and
> driving elements
> of my c31xr. Anyone did that before ?
>
> if you wanna see some pictures of the flashover see
> http://picasaweb.google.be/ON4MApictures/C31xr_2010Shuntfed160mFire
>
> 73 Marc ON4MA
> ----- Original Message -----
> From: "Greg - ZL3IX"<zl3ix@inet.net.nz>
> To: "topband topband"<topband@contesting.com>
> Sent: Monday, September 27, 2010 7:57 AM
> Subject: Re: Topband: Shunt Fed Tower-Need Parts
>
>
>
>> Hi Marc,
>>
>> I have been using a SteppIR for top loading for nearly 7 years. There
>> is no problem with doing this.
>>
>> I also took the step of grounding all elements to the boom to mazimise
>> the loading. For some reason the SteppIR elements are floating when the
>> antenna leaves the factory.
>>
>> 73, Greg, ZL3IX
>>
>> On 2010-09-27 07:19, Marc Wullaert ON4MA wrote:
>>
>>> Ed,
>>>
>>> I'm not shure but is it good to have a Steppir as toploading for 160m.
>>> What
>>> about the high voltages
>>> on the steppir motors and controlbox when you shuntfeed the tower ?
>>>
>>> Marc ON4MA
>>>
>>> ----- Original Message -----
>>> From: "Edward Sylvester"<navydude1962@yahoo.com>
>>> To: "topband topband"<topband@contesting.com>
>>> Sent: Saturday, September 25, 2010 10:13 PM
>>> Subject: Topband: Shunt Fed Tower-Need Parts
>>>
>>>
>>>
>>>
>> _______________________________________________
>> UR RST IS ... ... ..9 QSB QSB - hw? BK
>>
>>
>> ---
>> avast! Antivirus: Inkomende bericht is onbesmet.
>> Virus Gegevensbestand (VPS): 100927-0, 27/09/2010
>> Getest op: 27/09/2010 16:56:15
>> avast! - auteursrecht (c) 1988-2010 ALWIL Software.
>> http://www.avast.com
>>
>>
>>
>>
>
>
> ---
> avast! Antivirus: Uitgaande bericht is onbesmet.
> Virus Gegevensbestand (VPS): 100930-0, 30/09/2010
> Getest op: 30/09/2010 21:30:59
> avast! - auteursrecht (c) 1988-2010 ALWIL Software.
> http://www.avast.com
>
>
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
>
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|