Topband
[Top] [All Lists]

Re: Topband: how to hear through static crashes?

To: topband@contesting.com
Subject: Re: Topband: how to hear through static crashes?
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Tue, 27 Mar 2012 15:52:57 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On 3/27/2012 10:42 AM, GeorgeWallner wrote:
>   set the IF Filter to 600 Hz. This last one may
> sound counterintuitive, but I have found that: a) setting
> the filter too narrow results in ringing which stretches
> out the effects of a lightening crash, masking more of the
> signal, b) setting the K3's DSP filter narrower changes
> the shape of the CW pulses and makes them stand-out less,

Not counter-intuitive at all -- a fundamental property of filters is 
that ringing occurs on impulses due to phase shift in the filter, which 
for good filters, is greatest at the filter slopes and is proportional 
to the steepness of the slope, so very narrow filters put that ringing 
closer to the CW note.  Ringing is also proportional to the amplitude of 
the impulses and their rise time, which is why soft clipping can be 
helpful if it doesn't add significantly to distortion in the passband.

I suspect that the superiority of the Collins mechanical filters in this 
application may be due to a better behaved phase response in the passband.

73, Jim K9YC
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>