Easy....get aquarium sealer. Nothing toxic in it.
Dave Harmon
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok.
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Charlie
Cunningham
Sent: Monday, March 18, 2013 4:37 PM
To: wa3mej@comcast.net; topband@contesting.com
Subject: Re: Topband: Using GE silicone as antenna sealant.
I agree completely!! RTV will outgas acetic acid for a VERY LONG TIME -
almost forever! You should try it in a high-vacuum chamber! Especially one
that includes an "ion pump" to achieve very high vacuums! RTV will "belch
acetic acid in copious quantities virtually forever.
Definitely need one of the newer gasless curing compounds that won't outgas
corrosive gases! GOOD POINT!
Charlie, K4OTV
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of
wa3mej@comcast.net
Sent: Saturday, March 16, 2013 12:40 PM
To: topband@contesting.com
Subject: Topband: Using GE silicone as antenna sealant.
Gents.. be very sure that if you pick GE silicone sealant.. (RTV or whatever
you call it) DO NOT use the kind that has acetic acid in it.. Back in the
early days of NASA rocket launches off Wallops Island NASA lost a rocket
they launched. It failed because they had used RTV that had acetic acid and
it had corroded the connections.. litterally.
A friend of mine W3AUN was one of the people responsible for this launch..
Long Live Seal Team VI
http://www.qsl.net/wa3mej/index.htm
----- Original Message -----
Well, those GE silicone sealants are designed to have pretty high
resistivity and are designed to be insulators as well as for protection.
Main thing, I expect is that the highest temperature that you reach is the
curing temperature of the silicone compound. No heat guns! :)
I wouldn't hesitate to apply it over the termination resistors on my
receiving loops, but I haven't bothered _________________ Topband Reflector
_________________
Topband Reflector
_________________
Topband Reflector
|