Rod, The best type I have come across is PB Blaster (made in Ohio), best
left overnight in difficult situations and another spray in the morning.
73 Clive GM3POI
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Roger
Graves
Sent: 01 August 2016 22:51
To: topband@contesting.com
Subject: Topband: aluminum "penetrating oil"
I need to separate KLH 3 inch aluminum boom sections. When assembled 20
years ago I used Penetrox on them so hopefully they are not welded together.
In fact one of them separated 1/2 inch then stuck. Would there be a
"penetrating oil" that would help to free/lubricate these joints to make the
separation easier?
Thanks and 73,
Rod, VE7VV
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|