Alex UA4WI modeled the antenna for my specific conditions.
If you know the MMANA program for antenna modeling, I can send a file.
Most of the answers in this figure are from my Twitter
73! de Eugene RA0FF
>Пятница, 12 января 2018, 12:44 +11:00 от Mike Waters <email@example.com>:
>Well, this is certainly different. At first glance, it appears that each
>section capacitively couples to the next one.
> - Have you modeled this?
> - What is the advantage as compared to other common 160m antennas?
> - And most importantly, What's the pattern and gain?
>On Thu, Jan 11, 2018 at 6:49 PM, Eugene Popov /RA0FF/ via Topband <
>firstname.lastname@example.org > wrote:
>> Since the fall of 2017 I have been experimenting with a new type of
>> antenna, which I called WireSpear (WS).
>Topband Reflector Archives - http://www.contesting.com/_topband
Topband Reflector Archives - http://www.contesting.com/_topband