Topband
[Top] [All Lists]

Re: Topband: Inverted L improvement question - Part 2

To: topband@contesting.com
Subject: Re: Topband: Inverted L improvement question - Part 2
From: Peter Bertini <radioconnection@gmail.com>
Date: Fri, 28 Dec 2018 23:46:47 -0500
List-post: <mailto:topband@contesting.com>
Those SWR readings seem to indicate a very large bandwidth, to the extent
it might suggest that your ground resistance losses are swamping the
antenna R radiation resistance.  It would be nice to know the R value at
resonance, where there is no J value.  Too bad the analyzer is overloading.
A simple BCB filter might help.

Pete k1zjh
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>