Re: Topband: 10 to 1 Ferrite Balun

["Richard (Rick) Karlquist" <richard@karlquist.com>]

On 3/19/2019 12:13 PM, Chuck Dietz wrote:
> Wouldn’t you connect the secondarys in series and the primaries in parallel?
>
> Chuck W5PR
The ADT8-1T+ is a 50 ohm to 400 ohm transformer.
Two connected in series results in a 100 ohm to 800 ohm transformer.
If you instead connect the primaries in parallel, you would in
in principle have a 25 ohm to 800 ohm transformer.  That isn't
what Herb needs.

73
Rick N6RK
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector