Re: Topband: I need help proofing an Inverted L model I made please. 40’ x 143’, four 100’ radials, #14 wire.

[Jim Brown <jim@audiosystemsgroup.com>]

On 12/11/2020 2:02 AM, Artek Manuals wrote:
> However I have always wondered about elevated radials . The NEC ( both 2 
> and 4) models (not that those are to always be trusted) show very little 
> (if any) improvement beyond four elevated radials, you have any theories 
> on why that is? Intuitively (also not to be trusted) that is a lot of 
> real estate in the spaces between
I refer you to N6LF's definitive work.

73, Jim K9YC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector