| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: I need help proofing an Inverted L model I made please. 40 |
| From: | Jim Brown <jim@audiosystemsgroup.com> |
| Reply-to: | jim@audiosystemsgroup.com |
| Date: | Fri, 11 Dec 2020 12:25:21 -0800 |
| List-post: | <mailto:topband@contesting.com> |
On 12/11/2020 3:55 AM, Rob Atkinson wrote: The only thing about this I advise in the way of a change is something W1BB recommended, Again, I refer to N6LF's monumental work. 73, Jim K9YC _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: I need help proofing an Inverted L model I made please. 40’ x 143’, four 100’ radials, #14 wire., Jim Brown |
|---|---|
| Next by Date: | Topband: Low Dipoles, VE6WZ_Steve |
| Previous by Thread: | Re: Topband: I need help proofing an Inverted L model I made please. 40, Rob Atkinson |
| Next by Thread: | Topband: I identified signal on 1.825 MHz this morning, Don Kirk |
| Indexes: | [Date] [Thread] [Top] [All Lists] |