Topband
[Top] [All Lists]

Re: Topband: Looking for hi-Z antenna

To: topband@contesting.com
Subject: Re: Topband: Looking for hi-Z antenna
From: Artek Manuals <Manuals@ArtekManuals.com>
Date: Wed, 10 Mar 2021 09:21:23 -0500
List-post: <mailto:topband@contesting.com>
Rich
Roughly how big is your back yard? Any trees over 30' high?

( I did work Antarctica from Texas once with a Bnut HF-9V and about 8 radials, so even a blind pig finds a truffle now and then ...but your instincts are correct about there being better alternatives ...8^)

Dave
NR1DX

On 3/10/2021 8:07 AM, Richard Quick wrote:
I have as much of a compromised antenna for 160 as you can get.
A Butternut HF2V with a 160 coil, mounted on a chain link fence.
I have a small lot with overhead power lines across the back of the property, 
and Am looking for a better idea.
I’m thinking a hi impedance feed point antenna ie:450 ohms would require a much 
less extensive ground radial system than say, an inverted L with low impedance. Easier 
to match a 450 Ground than 37 ohms.
Am I nuts?  Anyone with ideas along this line of thinking?



Rich - W4RQ Amateur Radio: The Original Social Media
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

--
Dave Manuals@ArtekManuals.com www.ArtekManuals.com

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>