X-Mozilla-Status: 0801
FCC: C:\Netscape\MAIL\Sent
Message-ID: <[email protected]>
To: <[email protected]>
Date: Sun, 24 Aug 1997 20:51:07 -0700
From: tjerk <[email protected]>
X-Mailer: Mozilla 2.01KIT (Win16; I)
MIME-Version: 1.0
To: [email protected]
Subject: Re: Fwd: [TowerTalk] T2X info tnx
References: <[email protected]>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
> ....an important point brought up here is the missing nuts n washers......
> oscillations/vibrations happen in beams and towers and they are transferred
> to everything in the mechanical system....this is why I went to rivets on
> beams and have been buying more and more locknuts....sometime when you are on
> the tower place your finger tip on the boom of one of the yagis...if there is
> any wind you will sense a mild vibration - I guarantee!
Nothing new! I have a 100ft tower with a 3el 40m beam and a KT34XA
and regulary lost the nuts on the Tailtwister. Have replaced them with
double nuts - so far so good.
Tjerk, ZS6P
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: [email protected]
Administrative requests: [email protected]
Problems: [email protected]
Search: http://www.contesting.com/km9p/search
|