I guess this tells you how much I know about Hazers . . . nothing.
Stan [email protected]
>OM STAN, MY HAZER HAS A SAFETY CATCH THAT IT RESTS ON TO PREVENT SUCH SHOULD
>THE CABLE BREAK. I DID HAVE MY SLACK COAX AT TOP ALMOST LOOP OVER THE TOWER,
>WHICH WUD HAVE PREVENTED LOWERING. SOMEONE USED TO MAKE AN ACCY. ARM TO HOLD
>ROTATING COAX LOOP OUT TO ONE SIDE, TO PREVENT SUCH.
> 73, DOUG - NX4D
>
>Stan Griffiths wrote:
>
>> A couple of recent posts caused me to have an aweful nightmare. I
>> envisioned myself halfway up a tower with a Hazer on it at the top. Rotator
>> failure prevented rotating the beam so the Hazer could be lowered.
>> Suddenly, the Hazer cable lets go . . .
>>
>> So far, I haven't heard of this happening, but the thought of it is enough
>> to keep me off a tower with a Hazer on it that is cranked up.
>>
>> Stan [email protected]
>>
>> --
>> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>> Submissions: [email protected]
>> Administrative requests: [email protected]
>> Problems: [email protected]
>> Search: http://www.contesting.com/km9p/search
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: [email protected]
>Administrative requests: [email protected]
>Problems: [email protected]
>Search: http://www.contesting.com/km9p/search
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: [email protected]
Administrative requests: [email protected]
Problems: [email protected]
Search: http://www.contesting.com/km9p/search
|