Towertalk
[Top] [All Lists]

[TowerTalk] Cushcraft U-bolts

To: <towertalk@contesting.com>
Subject: [TowerTalk] Cushcraft U-bolts
From: TOMK5RC@aol.com (TOMK5RC@aol.com)
Date: Thu, 2 Jul 1998 09:30:12 EDT
In a message dated 7/1/98 11:21:02 PM Central Daylight Time, nw9g@netusa1.net
writes:

> Just came down from removing my 2 meter 10 element cushcraft yagi.
>  The U-bolts broke backing off the nuts.  It sure made life at 100
>  f

I used a couple of Cushcraft U bolts on my KT34A (stolen from my 2 meter
beams). They also galled badly. One of the myths in our hobby is that
stainless steel (300 series and 18-8) is the magic answer to everything.
Unfortunately, Stainless has a bad habit of the threads deforming and galling,
especially if they get some aluminum shavings mixed in. The best defense is to
use Grade 8 cap bolts with appropriate clamping devices, such as Hy-Gain boom-
to-mast clamps. Fortunately, these days, better hardware stores are carrying
grade 5 and grade 8 bolts that are zinc plated or galvanized.

Tom, K5RC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>