Try McMaster-Carr or Grainger Made by Greenlee
Hank KN6DI
Dick Green wrote:
> I've never found a better way to make a hole for an SO-239 than a chassis
> punch. I have a set but can't remember where I got it. I'm sure they're
> still made. Check with a big hardware outlet like Home Depot or see if your
> local machine shop can point you in the right direction.
>
> 73, Dick, WC1M
>
> -----Original Message-----
> From: Pete Smith <n4zr@contesting.com>
> To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
> Date: Thursday, July 23, 1998 10:11 AM
> Subject: [TowerTalk] mounting barrel connectors on lightning bulkhead
>
> >
> >I am adding a ground-level grounding panel for better lightning protection
> >for my TOWER and ANTENNAS, and am not looking forward to drilling many
> >holes for coax connectors, then reaming to size (I lack a large-enough
> >drill). What other options are out there? Do they still make chassis
> >punches to do this job?
> >
> >
> >
> >73, Pete Smith N4ZR
> >In wild, wonderful, fairly rare WEST Virginia
> >
> >--
> >FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> >Submissions: towertalk@contesting.com
> >Administrative requests: towertalk-REQUEST@contesting.com
> >Problems: owner-towertalk@contesting.com
> >Search: http://www.contesting.com/km9p/search.htm
> >
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|