Towertalk
[Top] [All Lists]

[TowerTalk] Rope End Sealing

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rope End Sealing
From: N0NQX@Worldnet.att.net (Al Samson)
Date: Wed, 16 Sep 1998 19:19:32 -0500
I would recommend a book called The Knot  Book I have a copy and learn how to
whip tie the end.  The hot knifeing the end is going to hurt and cut if the rope
slips
from your grasp . It also details the many knots you can make.
K7LXC@aol.com wrote:

> In a message dated 98-09-15 19:36:10 EDT, terrys@romulus.ncsc.mil writes:
>
> <<      I recently bought some 3/8 inch braided dacron rope to use with a
>  gin pole. I'd like to receive some suggestions on the best way to seal the
>  rope ends, something better than the black electrical tape the vendor
>  used. >>
>
>       In the absence of a hot-knife that'll melt and fuse the rope at the same
> time, I just make a clean cut with a sharp razor knife and then use a lighter
> or flame of some sort to melt the strand ends together. Don't breath the
> vapors!
>
> Cheers,  Steve   K7LXC
>
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>