Steve, Are there special end sleeves for Phillystran preformed grips? I have
just installed six of them from a kit supplied by Texas Towers, but they
came with 6 black tie-wraps, which are used to prevent unravelling.
-- Darrell NR3Y/W6
-----Original Message-----
From: K7LXC@aol.com [mailto:K7LXC@aol.com]
Sent: Wednesday, July 28, 1999 7:52 PM
To: ctj92@primenet.com; towertalk@contesting.com
Subject: Re: [TowerTalk] Another Phillystran question
In a message dated 99-07-28 19:31:43 EDT, ctj92@primenet.com writes:
> How does Phillystran hold up as far as sagging go under icing conditions?
I
> wouldn't want an ice storm to render my installation 'guyless'.
Same as any other guy material, more or less. Since it has the same
breaking strength as equivalent sizes of EHS, it isn't any more or less
prone
to sagging than EHS.
Phillystran Preformed grips should be installed with end sleeves also
known as ice caps. They prevent accidental grip unravelling as ice travels
down the guy to the anchor.
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|