Towertalk
[Top] [All Lists]

[TowerTalk] Rohn 25; Ham-IV & T2X mounting

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn 25; Ham-IV & T2X mounting
From: wilder@abs.net (Dick Wilder (K3DI))
Date: Tue, 5 Oct 1999 12:41:19 -0400 (EDT)
Some years ago, a friend was going to show me how to cut Rohn 25 so
that a Ham IV or T2X could be mounted inside the tower.  That was
news to me; I did not know that the trend was to cut a rung or diagonal 
to allow the rotor mounting.  I had mounted the rotor inside Rohn 25
without cutting.  I just held the T2X next to where I wanted it and 
easily kicked it into the space.

I've done this on two towers.  I know one is a T2X but not sure if
the second is a Ham IV or T2X. I don't know how to identifiy the
model but think they are the same size.

73, Dick Wilder, K3DI      (WA2XSY-10 on the 60 meter band.)




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>