Towertalk
[Top] [All Lists]

[TowerTalk] Exothermic Welding?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Exothermic Welding?
From: spindoc@digital.net (Richard G. Spindler)
Date: Sun, 24 Oct 1999 20:39:55 -0400
OK Roger.

Thanks for the graphic description.  It gives me a good idea of what is
involved.

Doc, N9AM


-----Original Message-----
From: Roger D. Johnson <n1rj@pivot.net>
To: Richard Spindler <spindoc@digital.net>
To: <towertalk@contesting.com>
Date: Sunday, October 24, 1999 20:43
Subject: Re: [TowerTalk] Exothermic Welding?


>Hi Doc....
>
>It's done all the time. Same type of ingredients as used in the old
>THERMITE
>bombs that burn at a very high temperature. The method I've seen uses
>graphite
>molds that must fit snugly around the parts to be bonded. A special
>powder is
>poured into the molds and set alight. The mixture contains a powered
>metal that
>melts and flows around the parts to be bonded. Very easy to do out in
>the
>antenna field where you don't want to lug an oxy-acetylene rig!
>
>73, Roger
>
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>