> I plugged the Autek into my spectrum analyser. It's only -10dbm.
> Hardly enough to "burn out" the receiver... If anything, a guys gotta
> be very careful not to "bump" the key when making this measurement--or
> bye-bye-autek...
That doesn't agree with my Autek! That is only 71 mV!
My Autek is about one volt peak, or 10 dBm. Are you sure it is -10
dBm, and not +10dBm????
73, Tom W8JI
w8ji@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|