Towertalk
[Top] [All Lists]

[TowerTalk] Marking Coax

To: <towertalk@contesting.com>
Subject: [TowerTalk] Marking Coax
From: wbarby@telus.net (Wilf Barby)
Date: Fri, 2 Feb 2001 14:06:56 -0800
I use a 'cheap' method to mark control,coax, etc. cables.
Using MS Word or just plain DOS Edit, I prepare a label
for the cable. Label size, color, framing etc very flexible
in Word. Make lotsa' them, cut and apply with good
Scotch Magic Tape...several layers....good for many years.

A second method, use a Brothers PT  Touch Labeler.
Tape cost is reasonable, available in matte, clear etc.
Several font sizes selectable. Makes a professional
looking job.You can also 'pretty -it-up' by 'framing'
the name.

My .02c (US$) or .03c (CA$) worth!

Wilf  VE7QO

Disclaimer: I have no affiliation with the makers of Scotch Magic
Tape (tm). or Brothers P-Touch (tm).. Just a satisfied customer,
Hi

wbarby@telus.net


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Marking Coax, Wilf Barby <=