Anybody out there using an optical encoder for a position indicator.
My old Heathkit weather station used such a beastie for the weather
vane.
They are full rotation with no stops, totally sealed and nearly
indestructable.
73 de Brian/K3KO
"Lonnie (NT6B)" wrote:
>
> Hello to the group....I am looking for a source for a positioning
> Potentiometer, with the parameters of: 500 Ohms, Wire wound, Single turn
> (very important) precision potentiometer. This pot will hopefully have a
> shaft approx. 1/4 inch in diameter. I want to change out my Selsyns on my
> prop pitch motor and controller and be able to use a CDE or HyGain control
> box for the dial indicator. A friend of mine in Europe has made this
> conversion and it seems to work fine for him.
>
> Your input is appreciated...Have a good weekend from Sunny, Warm, Southern
> California.
>
> 73's......Lonnie (NT6B)
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: [email protected]
> Administrative requests: [email protected]
> Problems: [email protected]
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: [email protected]
Administrative requests: [email protected]
Problems: [email protected]
|