Hi everyone;
Try mgs4u.com. Allen may have some or know where to find some.Please give TT
the conversion info.
Bill Wall KC4UZ
----- Original Message -----
From: "Lonnie (NT6B)" <nt6b-vk7lm@dreamsoft.com>
To: <towertalk@contesting.com>
Sent: Friday, February 02, 2001 1:17 PM
Subject: [TowerTalk] Re: WTB Positioning Pots
> Hello to the group....I am looking for a source for a positioning
> Potentiometer, with the parameters of: 500 Ohms, Wire wound, Single turn
> (very important) precision potentiometer. This pot will hopefully have a
> shaft approx. 1/4 inch in diameter. I want to change out my Selsyns on my
> prop pitch motor and controller and be able to use a CDE or HyGain control
> box for the dial indicator. A friend of mine in Europe has made this
> conversion and it seems to work fine for him.
>
> Your input is appreciated...Have a good weekend from Sunny, Warm, Southern
> California.
>
>
> 73's......Lonnie (NT6B)
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|