Hi Towertalkers,
I just had a large batch of ubolts custom made for resale.
These are ideal for Yagi construction. Take a look at them
on the following page:
http://www.reprise.com/antronics/antronics_hardware.asp
Also take a look at the "About Antronics Hardware" page so
you can see why I say they are superior to stainless steel
for this application for several reasons. The reason I had
them custom made is two-fold: 1) they needed to have an
additional 1/2" of threads over an ordinary muffler clamp to
accommodate a thick mounting plate, and 2) I wanted them to
be "mechanically galvanized" using the same process that my
superior tower leg bolts go through. There are a couple of
good pictures of them on the "About Antronics Hardware" page
also.
Stay tuned. More neat stuff coming from Antronics of
Oregon, Inc.
Stan
w7ni@easystreet.com
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|