Paint Thinner works good to remove the glue.
Kevin Adam
1239 W. Till Rd.
Fort Wayne In 46825-2145
Phone & Fax (219)-490-7312
-----Original Message-----
From: owner-towertalk@contesting.com
[mailto:owner-towertalk@contesting.com] On Behalf Of Kevin Hemsley
Sent: Wednesday, November 07, 2001 11:40 AM
To: towertalk@contesting.com
Subject: [TowerTalk] CATV hardline is sticky
I managed to obtain some 3/4" CATV hardline with which I plan to feed a
new
horizontal loop. In preparing to install connectors, I discovered that
underneath the outer black jacket, there is some VERY sticky adhesive
between the aluminum shield and the black jacket. Is there something I
can
use to clean off this adhesive? It makes putting on connectors very
messy.
Thanks,
Kevin.
------------------------------------------------------
Kevin Hemsley
Systems Engineer
Microserv Computer Technologies, Inc.
kev@ida.net
KB7TYA
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!
http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|